Home Decorators Collection BF-22418 User manual

Home Decorators
Collection
BF-22418 OXFORD COLLECTION ONE DRAWER END TABLE
ASSEMBLY INSTRUCTIONS
Made In China

RIGHT
BOTTOM PANEL-1PC
PARTS LIST
code letter of part(s)need
numbered to assure fast,easy and correct assembly.
IMPORTANT NOTE:
Thank you purchasing this quality produst.Be sure to check all packing
Follow instructions listed below in proper sequence as
carton during shipment. Count all parts and material hardware,Compare
with parts list to be sure all part are present.If any parts are missing
or damaged,phone,fax,or mail to our Customer Service Department.For
efficient and speedy service please indicate the model number and
material carefully for small parts,which may have came loose inside the
JKL
IHG
DEF
C
B
A
TOP PANEL-1PC
ACROSS PANEL-1PC
FRONT DRAWER PANEL-1PC
RIGHT SIDE PANEL-1PC
SIDE DRAWER PANEL-1PC
LEFT SIDE PANEL-1PC
SHELF-1PC
DRAWER PANEL-1PC
BASE
BACK PANEL-2PCS
BACK DRAWER PANEL-1PC

XW
REAR PANEL GUIDE-1PC
V
U
SCREWS-1PC
P
ST
QR
ONM
LOW PANEL-1PC SCREWS-10PCS
SCREWS-14PCS
DOWELS-6PCS
CAM-BOLTS-10PCS
KNOB-1PC SHELF SUPPORT-4PCS
SCREWS-1PC
CAM-TOOL-1PC

THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS
NOTE:
TO PREVENT DAMAGE DURING ASSEMBLY,PLEASE ASSEMBLE THIS ITEM WITH AT
HOW TO USE THE CAM-TOOL
M
ARROW
N
ARROW
SHOULDER
LEAST TWO PEOPLE.
TURN THE CAM-BOLT SCREWS UNTIL THEY
ARE TIGHT, THE SHOULDER SHOULD BE
AGAINST THE SURFACE OF THE PART.
NOTE:
AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT.IN ORDER
UPON OPENING THOROUGHLY CLEAN ALL WOODS SURFACES TO REMOVE DUST
NOTE:

3
ATTACH LOW PANEL(V)TO BOTTOM PANEL(D)USING SCREW(R).
2).ASSEMBLE THE SIDE PANEL(B/C).
PLACE CAM-BOLTS(N)INTO HOLES IN PANEL(F/D)AND ATTACH USING 10 CAM-LOCKS(M).
ROTATE THE CAM-BOLTS(N)INTO HOLES IN SIDE PANEL(B/C).
INSERT THE 6 DOWELS(P)INTO HOLES IN ACROSS PANEL(F)AND LOW PANEL(V).

T
M
N
A
PLACE CAM-BOLTS(N)INTO HOLES IN SIDE PANEL(B/C)AND ATTACH USING CAM-LOCKS(M).
ROTATE THE CAM-BOLTS(N)INTO HOLES IN TOP PANEL(A).
3).ASSEMBLE THE TOP PANEL(A).
INSER THE SHELF SUPPORTS(T)INTO HOLES IN SIDE PANEL(B/C).