Home Decorators Collection LAILA User manual

ASSEMBLY INSTRUCTIONS OF LAILA METAL INLAY KING / QUEEN BED
Bolts:8+2 Pcs Allen Key:1 Pc Stud:1 Pc
Washers:
8+2 Pcs
Head Board - 01 Pc Foot Board - 01 Pc.
Center Rail - 01 Pc.
Side Rail - 02 Pcs.
Wooden Slats - 10 Pcs.
CAC-4NOV2017
Page 1/2
PARTS INCLUDED:
1. Head Board - 01 Pc
2. Foot Board - 01 Pc.
3. Side Rail - 02 Pcs.
4. Center Rail - 01 Pc.
5. Wooden Slats - 10 Pcs.
6. Center Support Leg - 01 Pc.
CARE INSTRUCTIONS
1) Clean with a dry cloth.
2) Do not use any chemical to polish the product.
PRE-ASSEMBLY
1. Please read all instructions carefully before beginning assembly.
2. Remove all parts and hardware from the box and lay out on a clean,
carpeted or scratch-free work surface, as this will avoid damaging
any parts during assembly.
3. The shipping box provides an ideal work surface. Do not dispose any
contents until assembly is completed to avoid accidentally
discarding parts or hardware.
4. We recommend adult assembly by two people for your safety.
Center Support - 01 Pc.
HARDWARE ENCLOSED:
7. Allen Bolts - 08+02 Pcs.
8. Washer - 08 + 02 Pcs.
9. Allen Key - 01 Pc.
10. Stud - 01 Pc.

Fig. 1 1
3
4
5
2
Fig. 2 1
2
3
3
A
A
D
B
B
C
C
D
Fig. 3
Page 2/2
6
ASSEMBLY INSTRUCTIONS:
Final View
Fig. 4
ASSEMBLY INSTRUCTIONS OF LAILA METAL INLAY KING / QUEEN BED
CAC-4NOV2017
Step 1: Take out all parts supplied on a clean surface as shown
in fig. 1.
Step 2: Take out the bolts, washers and Allen key provided in
the Hardware Pack.
Step 3: Match Side Rail (3) to Head Board (1) 'A' to 'A' &
Foot Board (2) 'D' to 'D'. Insert bolts and tighten with
allen key provided as shown in figure 2.
Step 4: Match another Side Rail (3) to Head Board (1) 'B' to
'B' & Foot Board (2) 'C' to 'C'. Insert bolts and tighten
with allen key provided as shown in figure 2.
Step 5: Fix the Center Support leg (6) to the middle of Center
Rail as shown in Fig. 3, and place the Center Rail (4)
as shown in fig. 3.
Step 6: Place the wooden slats as shown in fig. 4.
Your Bed is ready