Home Decorators Collection ARBOR POINT GL-11046-AAP User manual

Model #GB 5085 AAT
USE AND CARE GUIDE
ARBOR POINT COMMERCIAL DAY BED
Item #
Model # GL-11046-AAP
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
We appreciate the trust andconfidence you have placed in Home Decorators Collection through the purchase of this day bed..We strive to
continually create quality products designed to enhance your home. Visit usonline to see our full line of products available for your home
improvement needs. Than k you for choosing Home Decorators Collection!
1005 954 888

2
Table of Contents
Table of Contents ............................... . . . . 2
Important Safety Instructions .............................. . . . . 2
Warranty ...................................... . . . . 2
What is Covered ............................... . . . . 2
What is not Covered ............................ . . . . 2
Important Safety Instructions
2.
SAVE THESE INSTRUCTIONS
Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1.
Pre-Assembly.
............................... . . . . . 3
Planning Assembly
.......................... . . . ..3
Hardware Included ........................... . . . . . 3
Package Contents ............................ . . . . . 4
Assembly
...................................... . . 5
Care and Clea.ning ............................. . . . . . 8
Warranty
THIS IS A RESIDENTIAL WARRANTY ONLY AND DOES NOT APPLY TO COMMERCIAL
USE
5 YEAR FRAME AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
We warrant the frame and the fabricto be free of manufacturing defects to the original purchaser for five years.
at 1-800-986-3460 or visit
For a copy of our full limited warranty, please contact our customer service team
www.HomeDepot.com/Home Decorators.

3
Pre-Assembly
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Verify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to
avoid scratching.
_
AA
_
BB
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
M6 x 50 mm bolt
M6 spring washer
M6 wrench
_CC _DD _EE _FF _GG
Part Description Quantity
AA M6 x 30 mm bolt 9
BB 8
CC 13
DD
M6 x 35 mm bolt
2
M6 x 20 mm bolt
8
38
4
38
M6 washer
_
HH
Adj ustable foot
EE
F F
G G
HH

Pre-Assembly
4
PACKAGE CONTENTS
ＫＬＭＮ
Part Description Quantity
B Back right leg
1
C
1
A Bay bed base
1
DF ront right leg 1
E 1
F 1
1
2
1
H S upport bar
1
1
1
Canopy cover
2
(continued)
J
Ｇ
Ｈ
Cushion
Back left leg
F ront left leg
Back apron
F ront apron
Middle leg
Back support frame
Top frame
G
K
L
M
N
ABCDE F
J

5
Attach the back support frame ( ) to the back apron ( F ) with M6
Assembly
Attaching the back support frame to the Attaching one support bar to the front and
□
washers (F F ), M6 spring washers (G G ) and M6 x 20 mm bolts (DD)
NOTE:Please ensure all bolts are aligned and assembled
correctly. Do not tighten all the bolts until S tep 1 0.
Attaching the middle leg and support bars
to the day bed base
J
back apron
using the M6 wrench (EE).
J
back aprons
Attach the support bar ( ) to the front and back aprons (G and F )
□
with M6 washers (F F ), M6 spring washers (G G ) and M6 x 3 5 mm bolts (CC)
using the M6 wrench (EE).
Ｈ
Attaching another support bar to the front
and back aprons
Attach another support bar ( ) to the front and back aprons (G and F )
□
with M6 washers (F F ), M6 spring washers (G G ) and M6 x 3 5 mm bolts
(CC) using the M6 wrench (EE).
Ｈ
Ｇ
Attach the middle leg (K ) and the support bars (H ) to the day bed base (A)
□
(DD) using the M6 wrench (EE).
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
12
34
with M6 washers (F F ), M6 spring washers (G G ) and M6 x 20 mm bolts
ＧＧ
A
CC
DD
FJ
K
F F
ＧＧ F F
ＧF
H
H
F
J
F F
ＧＧ
CC F F ＧＧ ＧＧ
DD
DD
F F

Assembly
□Attach the front apron (G ) and back apron (F ) to the day bed
6
Attaching the back left leg to the day bed
6
(continued)
the day bed base
□Attach the back left leg (C) to the day bed base (A) with M6 washers
6
7
8
Attaching the front and back aprons to
base (A) with
M6 washers (F F ), M6 spring washers (G G ) and
M6 x 3 5 mm bolts (CC)
A
□
Attach the back support frame ( ) to the day bed base (A) with
J
M6 washers (F F ), M6 spring washers (G G ), M6 x 3 0 bolts (AA) and
M6 x 20 mm bolts (DD)
base
(F F ), M6 spring washers (G G ) and M6 x 50 mm bolts (BB) using the M6
using the M6 wrench (EE).
using the M6 wrench (EE).
wrench (EE).
Attaching the back right leg to the day
bed base
□Attach the back right leg (B) to the day bed base (A) with M6 washers
(F F ), M6 spring washers (G G ) and M6 x 50 mm bolts (BB) using the M6
wrench (EE).
Attaching the front left leg to the day bed
□Attach the front left leg (E) to the day bed base (A) with M6 washers
base
(F F ), M6 spring washers (G G ) and M6 x 50 mm bolts (BB) using the M6
wrench (EE).
5
BB
E
CC
ＧＧ F F
C
ＧＧ
F F
F F
ＧＧ AA
DD
ＧＧ F F
CC
F F
ＧＧ
F F
ＧＧ
BB
B
BB ＧＧ F F
J

Assembly (continued)
7HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
9
Attaching the front right leg to the day
bed base
□
(F F ), M6 spring washers (G G ) and M6 x 50 mm bolts (BB) using the M6
wrench (EE).
Attach the front right leg (D) to the day bed base (A) with M6 washers
10
Attaching the top frame to the day bed
base
□
(F F ), M6 spring washers (G G ) and M6 x 3 5 mm bolts (CC) using the M6
wrench (EE).
Attach the top frame (M) to the day bed base (A) with M6 washers
ＨＨ
Adding the cushions
11
Attaching the canopy cover to the day
bed base
□
feet (H H ).
Attach the canopy cover (L ) to the finished frame with adj ustable
12
□
Place the cushions (N ) on the day bed.
The day bed now is ready for use.
□
L
M
N
BB
ＧＧ
F F
D
ＧＧ
F F CC
□Tighten all the bolts with the wrench (E E ).
B
A
C

8
Care and Cleaning
Do notallow water to buildupinthe frames.Thiswillcausecorrosionandpossible freezingdamageincoldclimates.
Use a mildsoapand waterfornormalcleaning. Do notusejanitorial or alcoholbasedcleaners.Somecleaners may be marked as
natural,butsomeingredients may causediscoloration or have an adverse reaction to yourfinish.
Rinse with cleanwateranddry with a soft,absorbent clothtowel.
Treatthe frames with a liquid wax for maximumprotectionagainst UV raysand/orsalty,dampair.
□
□
□
□
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.