Home Decorators Collection HD-1200-LED User manual

THANK YOU
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this 1-LIGHT OUTDOOR PENDANT.
home improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
1-LIGHT OUTDOOR PENDANT
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Item #206968085
Model #HD-1200-LED

2
Table of Contents
Safety Information
NOTICE: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTICE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15B of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference to radio communicaions. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
NOTICE:
SUITABLE FOR WET LOCATIONS.
WARNING: Be sure the electricity to the wires you are
working on is shut off. Either remove the fuse or turn off the
circuit breaker.
WARNING: Carefully read and understand the information
given in this manual before beginning the assembly and installation
of the product. Failure to do so could lead to electric shock, re, or
other injuries which could be hazardous or even fatal.
Warranty
WHAT IS COVERED
WHAT IS NOT COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years from date
of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this
product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at
the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations,
neglect, or mishandling.
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered.......................................................................2
What is Not Covered ................................................................2
Pre-installation ..............................................................3
Planning Installation ................................................................3
Tools Required .........................................................................3
Hardware Included...................................................................3
Package Contents ....................................................................4
Installation .....................................................................5
Care and Cleaning .........................................................7
Troubleshooting.............................................................7
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with
the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse,
negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to
the finish on any portion of the product, such as surface discoloration and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS.
□Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
□
□
□

3
Read all instructions before assembly. Before starting the installation of this xture or the removal of a previous xture, disconnect the power
by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
Pre-Installation
HARDWARE INCLUDED
PLANNING INSTALLATION
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
TOOLS REQUIRED
NOTE: Keep your receipt and these instructions for proof of
purchase.
NOTE: Hardware not shown to actual size.
Flathead
Screwdriver
Phillips
Screwdriver Ladder Wire Strippers
Pliers Safety GlassesWire CuttersElectrical
Tape
EE
FF GG HH II
DD
BB CC
AA
Part Description Quantity
AA Cross Bar 1
BB Outlet Box Screw 2
CC Screw Collar Loop (preassembled to Cross Bar (AA)) 1
DD Ring (preassembled to Cross Bar (AA)) 1
EE Chain 1
FF Canopy 1
GG Wire Connector 3
HH Ground Screw 1
II Quick Link (attached to each end of the Chain (EE))2

4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Cylindrical Glass 1
B 1
Gasket (preassembled to Cylindrical Glass (A))
C
B
D
G
A
E
F
C 1
D 1
Metal Cage
Finial (preassembled to Cylindrical Glass (A))
E 1
Transparent Glass
F 1
Fixture
G 2
Ball Finial (preassembled to Fixture (F))

5HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
AA
Installation
1Attaching the cross bar to the
outlet box
Attaching the chain
□Remove the Ring (DD) and the Screw Collar Loop (CC) from
the preassembled threaded nipple on the Cross Bar (AA).
□Mount the Cross Bar (AA) to the outlet box (not included)
using the two Outlet Box Screws (BB).
□Attach the Screw Collar Loop (CC) to the threaded nipple of the
Cross Bar (AA).
□
□
□
Shorten the Chain (EE) length to the desired hanging length by
using pliers (not included) to pull open the chain link at each
end of the section of Chain (EE) to be removed.
Unlink each end of the unwanted section from the Chain (EE) by
unhooking the opened link from the remaining Chain (EE).
Use the open chain link on the end of the remaining Chain (EE),
relink it by hooking it to the end of the Chain (EE) attached to
the xture, and use pliers to reclose the opened chain link.
□
□Weave the xture wire and the xture ground wire from the
Fixture (F) through the Quick Link (II), the Chain (EE), the Ring (DD),
the Canopy (FF), the Quick Link (II), the Screw Collar Loop (CC),
and the threaded nipple on the Cross Bar (AA).
□
Pass the Chain (EE) through the Canopy (FF) and the Ring (DD).
□Wrap the ground wire from the xture around the Ground
Screw (HH) on the Cross Bar (AA).
□Connect the smooth wire (marked) from the xture to the
black supply wire.
□Connect the ground wire from the xture to the ground
wire from the outlet box.
□Connect the ridged wire (unmarked) from the xture to the
white supply wire.
□Cover the three connections using the three Wire
Connectors (GG). Wrap the three wire connections with
electrical tape for a more secure connection.
□Position the wires back inside the outlet box.
2
3 Connecting the electrical wires
BB
CC
DD
NOTE: If adjusting the chain length, consider using a
soft cloth between the pliers and the chain links to avoid
damaging the nish of the Chain (EE). The top and bottom
Quick Link (II) of Chain (EE) are required.
GG
HH
AA
Attach one end of the Chain (EE) to the Screw Collar Loop (CC)
using the Quick Link (II).
AA
CC
FF
DD
A
II
EE
EE
II
□Attach the bottom end of the Chain (EE) to the Fixture (F) using
the Quick Link (II).