Home Decorators Collection LVB0642-S User manual

USE AND CARE GUIDE
LED OUTDOOR WALL LANTERN
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service.
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
THANK YOU
Item # 302619923 / 1002748614
Model # LVB0642-S / LVB0642-L

Table of Contents
Safety Information
Warranty
CAUTION:Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted during
shipping. If there is a defect in the wire, do not attempt
installation. Please call our Customer Service Team at
1-800-986-3460.
WARNING: Before starting installation of this fixture or
removal of a previous fixture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the
fuse box.
 Consult a qualified electrician if you have any electrical questions.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. Any changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
............................................................2Table of Contents
Package Contents.......................................................................4
...........................................................2Safety Information
...................................................................... 5 Installation
Hardware Included......................................................................3
...........................................................................2Warranty
......................................................................... 6Operation
..................................................................3 Pre-Installation
.......................................................... 6Care and Cleaning
Planning Installation...................................................................3
Tools Required............................................................................3 .............................................................. 6Troubleshooting
Table of Contents
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifica-
tions, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty
material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as
this is considered normal wear and tear. The manufacturer does not warrant and specifically disclaims any warranty, whether express or
implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability
and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved
in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.
2Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS

3
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Wire
strippers
Ladder Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
Pre-Installation
PLANNING INSTALLATION
 Read all instructions before installation.
 To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
 Keep your receipt and these instructions for proof of purchase.
AA BB
Mounting unit (with 4 pre-installed screws)
AA 1
BB Mounting screw 2
CC Wire nut 3
Part Description Quantity
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
CC

4
Pre-Installation (continued)
PACKAGE CONTENTS
Pre-Installation (continued)
Light fixture
A 1
Part Description Quantity
A
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS

Installation
5
1Attaching the mounting unit to the
junction box
 Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
 Remove the four pre-assembled screws from the mounting
unit (AA).
2
NOTE: The pre-installed support screws on the
mounting unit (AA) should protrude out away
from the junction box.
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the preinstalled
ground screw.
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to thewhite(neutral) wire.
3Installing the light fixture
 Secure the light fixture (A) to the junction box by placing
 Secure the light fixture with four previously-removed screws.
the mounting bracket over the preinstalled support
screws on the mounting unit (AA).
AA
CAUTION:To avoid any waterproofing problems, please
make sure the fixture fits the mounting surface perfectly
during installation and use silicone sealant around the fixture
for better sealing after installation.
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
CC
AA
BB