HOME8 WMD1201 User manual

Add-On Device Quick Start Guide
All WWAlarm add-on devices have to work with WWAlarm systems
Add-on Device
Quickstart Guide
What’s inside:
Model No. WMD1201
1x Automatic
Medication Dispenser
6x Dosage Templates 1x Key
Automatic Medication
Dispenser

Add-On Device Quick Start Guide
Step 1: Assemble your device and accessories
1-10 ft
1. Unpack your device and accessories.
2. Pair the device with the Security Shuttle within
1-10 feet to make sure the connection is working well.
3. Remove the battery cover of the Automatic
Medication Dispenser and insert batteries.

Add-On Device Quick Start Guide
Step 2: Add a device
1 . Open the WWAlarm app, tap on the the menu button
" " and select “Device Management”.
2. Press the add button ‘+’ next to Sensor List.
3. Follow the app instructions to scan the QR code
located on the device.
Note: If the scan is incomplete, you will be asked to enter the serial number
(SN) of the device.

Add-On Device Quick Start Guide
Step 3: Mount your device
Before you use your device, see if it's within
Security Shuttle’s range.
1. Take your device to the room you want to use it in.
2. Test the device by short pressing the SYNC button
on the Medication Dispenser. A green light means
you’re in range. A red light means you’re almost out
of range.
Red lightGreen light
SYNC button
Note: After the time changes from Standard to Daylight Saving Time,
please place the medication dispenser near the Security Gateway and
press the Sync Button for 1 second. The time on the dispenser will be
updated.