HOMEDEPOT StyleWell SK19458A User manual

THANK YOU
We appreciate the trust and confidence you have placed in StyleWell through the purchase of this *******. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing StyleWell!
USE AND CARE GUIDE
************
Questions, problems, missing parts?
Before returning to the store, call Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Item # ************
Model # SK19458A

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................3
1 Year Warranty .......................................................................3
What is Covered .......................................................................3
What is Not Covered ................................................................3
Pre-assembly.................................................................4
Planning Assembly...................................................................4
Tools Required .........................................................................4
Hardware Included...................................................................4
Pre-assembly (continued) ............................................ 5
Package Contents ....................................................................5
Safety Information
DANGER
□Keep small parts away from children during assembly.
□Read and follow instructions carefully.
WARNING
□Read these instructions carefully and keep in a safe place.
□TO GUARANTEE THE SAFE USE OF THIS PRODUCT, FOLLOW
THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN
THIS MANUAL.
□Adult assembly required.
□Small parts may present choking hazard prior to assembly.
□Do not use power tools to assemble your furniture. Power
tools may strip or damage parts/product.
□Do not overtighten connectors (screws, bolts, etc.).
Overtightening can lead to product damage.
□Be sure to check all packing materials carefully for small
parts that may have come loose inside the carton during
shipment. If parts are missing, contact THE HOME DEPOT to
obtain any missing parts.
□DO NOT USE SUBSTITUTE PARTS.
□This product should only be used on a flat, level surface.
□Product is designed to hold 119 pounds. Exceeding this limit
may damage the product or cause injury to the user.
NOTE: If you are unsure about your wall type or what
mounting method you should use, consult a qualified
professional.
CAUTION
Touble Shooting .......................................................................6
Assembly Note .........................................................................6
Assembly ...................................................................... 7



3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Warranty
1 YEAR WARRANTY
WHAT IS COVERED
We guarantee this product to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
This warranty does not cover commercial use, acts of nature, and abusive use.

4
Pre-assembly
PLANNING ASSEMBLY
Keep children and pets away from build area. Make sure your area is large enough to unpack, sort and assemble the unit.
TOOLS REQUIRED
Small head
Phillips
screwdriver
Large head
Phillips
screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Wood dowel 26
BB Cam lock bolt 39
CC Cam lock 39
DD Plastic cover 10
EE 1/2 in. Knob bolt 2
FF 1 in. Flat head screw 13
GG 1/2 in. Flat head screw 4
HH Handle 1
Part Description Quantity
II Knob 2
JJ 3/4 in. Handle bolt 2
KK Knob for towel rac
k
2
LL 1-3/4 in. bolt 4
MM Wrench 1
NN Shelf support 4
OO Support 2

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A
Top panel 1
B Left side panel 1
D Fixed panel 1
E Partition 1
F Adjustable shelf 1
G Up back panel 1
H Bottom back panel 1
I Bottom panel 1
J Bottom drawer front panel 1
K
Right side towel rac
k
1
L Left side towel rack 1
M Towel rack bar 1
Part Description Quantity
N Top drawer front panel 1
O Top drawer left side panel 1
P Top drawer right side panel 1
Q Top drawer back panel 1
R Top drawer bottom panel 1
S Support bar 1
T Universal wheel with brake 2
U Universal wheel 2
V Bottom drawer left side panel 1
W Bottom drawer right side panel 1
X
Bottom drawer support panel 2
Y Bottom drawer back panel 1
Z Bottom drawer bottom panel 1
C Right side panel 1

6
Panel cannot be assembled Make sure
Pre-assembly (continued)
ASSEMBLY NOTE
Upon opening, thoroughly clean all wood surfaces to remove dust and dirt that may have settled onto the finish during
shipment. In order to prevent damage during assembly, Please assemble this item with at least two people.
NOTE: Turn the cam-bolt screws until they
are tight, the shoulder should be
against the surface of the part.
NOTE:The arrows on the hidden cam-locks should point to the cam-bolts.
TROUBLE SHOOTING
HOW TO USE THE CAM-TOOL
PROBLEMS SOLUTIONS
Not all of the product’s legs
touch the floor
Make sure adjustable center feet levelers are adjusted properly. The levelers are pre
assembled on the bottom of the legs.
The product is KD construction. You may need to loosen the bolts and place the
product on a flat surface. Ensure that the legs all touch the flat surface and then re-
tighten the bolts.
Loosen all the bolts and apply some weight to the product to get all the feet to touch
the floor. Then re-tighten the bolts in that position.
panel is on right direction.
Door cannot be closed or
without magnetic function Adjust the magnetic clamp make sure it is assembled on appropriate position.
Door is not flat Adjust the magnetic clamp make sure it is assembled on appropriate position.
Drawers cannot pull in or
Pull out smoothly
Refer assembly instruction details to assemble drawers, and pull in and pull out
drawers several times gently.
Drawer cannot be removed When removing the drawer, tip-up the safety release tab to remove the drawer from
the body.
Drawer cannot be assembled
Check if drawer two side boards are assembled backwards.
According to drawer assembly instruction step, Check i
f
drawer two side boards are
assembled backwards.
BB
CC

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly
1 Attaching the partition to the
bottom panel
□a) Install bolt (BB) into panel (I).
□ b) Insert lock (CC) into partition (E).
□ c)Attach support member (OO-3) to partition (E) with
screw (OO-4) as shown.
□ e) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.
□d) Join partition (E) to the panel (I) with dowel (AA).

8
Assembly (continued)
2 Attaching the bottom back panel
□a) Install bolt (BB) into partition (E).
□ b) Insert lock (CC) into panel (H).
□c) Join panel (H) to the partition (E) with dowel (AA).
□ d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

9 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
3 Attaching the fixed panel
□a) Install bolt (BB) into panel (D).
□ b) Insert lock (CC) into partition (E).
□c) Join panel (D) to the partition (E) with dowel (AA).
□ d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

10
Assembly (continued)
4 Attaching the up back panel
□a) Install bolt (BB) into panel (D).
□ b) Insert lock (CC) into panel (G).
□ d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.
□c) Join panel (G) to the panel (D) with bolt (BB).

11 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
5 Attaching the left side panel
□a) Install bolt (BB) into panel (B).
□b)Attach support member (OO-3) to panel (B) with screw
(OO-4) as shown.
□ c) Insert lock (CC) into panels (D), (G), (H) and (I).
□d) Join panel (B) to the assembled body with dowel (AA).
□ e) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

b) Attach towel rack side panels (L) and (K) to the panel (C) with bolt (LL). Turn and tighten bolt (LL) with wrench (MM).
12
Assembly (continued)
6 Attaching the towel rack
□a) Join towel rack side panels (L) and (K) to the towel bar (M).
□

13 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
7 Attaching the right side panel
□a) Install bolt (BB) into panel (C).
□ b) Insert lock (CC) into panels (D), (G), and (I).
□c) Join panel (C) to the assembled body with dowel (AA).
□ d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

14
Assembly (continued)
8 Assembling the universal wheel
□Insert wheels (T) and (U) into panels (B) and (C) as shown.

15 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
9 Attaching the top panel
□a) Install bolt (BB) into panel (A).
□ c) Insert lock (CC) into panels (B), (C) and (G).
□c) Join panel (A) to the assembled body with dowel (AA).
□d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

16
Assembly (continued)
10 Assembling the adjustable shelf
□a) Turn and tighten knob (KK) to the towel rack side panels.
□ b) Insert shelf supports (NN) in desired positions and place shelf (F) on the supports.

17 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
11
□d) Insert lock (CC) into panels (V), (W) and (X).
□f) Cover the cam holes with the cover (DD).
□a) Install bolt (BB) into panel (J).
Attaching the bottom drawer
front panel
□c) Attach panel (J) to the assembled body with screw (GG)
as shown.
□b)Attach support member (OO-2) to panel (J) with screw
(OO-4) as shown.
□e) Join panels (V), (W) and (X) to the panel (J) with bolt
(BB).
Tighten bolt (BB) with lock (CC) in the pre-drilled holes.

(OO-1).
18
Assembly (continued)
12 Attaching the support
□c) Tighten panel (Y) to the assembled body with screw
(FF).
□a) Slide panel (Z) into the grooves on panels (V) and (W). □d) Join the both ends with the middle part of the support
□b) Tighten handle (HH) to panel (J) with bolt (JJ).

f) Tighten knob (II) to panel (N) with bolt (EE).
19 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly (continued)
13 Assembling the drawer
□a) Install bolt (BB) into panel (N).
□ b) Insert lock (CC) into panels (O), (P) and bar (S).
□ c) Join panels (O), (P) and bar (S) to panel (N) with dowel (AA).
□ d) Tighten bolt (BB) with lock (CC) in the pre-drilled holes.
Slide panel (R) into the grooves on panels (O) and (P).
□ e) Tighten panel (Q) to the assembled body
with screw (FF) and dowel (AA).
□
□ g) Cover the cam holes with the cover (DD).

20
Assembly (continued)
14 Finalizing the assembly
□Insert the drawer into the assembled body as shown.
NOTE: Make sure the slide piece is at the front end of
the glide when installing the drawer into the body.
NOTE: When removing the drawer, tip-up the safety
release tab to remove the drawer from the body.