HOMELEADER GH-15F User manual

INSTRUCTION MANUAL
Glass Panel Convector Heater
Model: GH-15F（Black）、GH-15F（White）
Dear customer:
●Thank you for choosing our products.
●This product is a well-designed, high quality heater.
For your convenience, please read the instructions carefully and follow the instructions in this
manual.
●Our company will provide you the best service. Regardless of any problems during use, please
contact us.

一. Product features:
1. High-quality heating element with aluminum hear sink: made of advanced technology, fast heat,
big thermal area, rapid temperature rise, stable performance, no oxygen consumption, no light
consumption.
2. Can be used in living room, bedroom and other area.
3. Ultra-quiet heating, quiet and cozy.
4. Display panel of digital screen, infrared remote control, easy and simple.
5. Multiple safety device: Auto power-off protection during overheating, safer and more at ease.
6. Glass panel, metal shell: safe and durable.
7. Noble, elegant and beautiful special crystal glass panel.
二. General safety Warning:
1. Read all instructions carefully before using.
2. Make sure the voltage is the same as that indicated on the rating plate of the appliance.
3. Do not operate this appliance if the cable or plug becomes damaged.
4. Keep the appliance and cable away from sources of heat, sharp objects or anything that may
cause damage.
5. If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting to the mains power supply.
7. Switch off the power supply and disconnect from mains supply when not in use, before cleaning
or other maintenance.
8. To disconnect the appliance, switch it "OFF", and then remove the plug from outlet. Do not pull
the cord to disconnect the plug.
9. The heater must not be located immediately below a socket-outlet.

10. Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fire, do not block air intakes or exhaust in any manner.
14. Don’t touch the hot surfaces.
15. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may
cause an electric shock, fire or damage to the appliance.
16. Always ensure that hands are dry before operating or adjusting any switch on the product or
touching the plug and socket-outlet.
17. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
18. Children should be supervised to ensure that they do not play with the appliance.
19. Do not leave this appliance unattended when it’s in use.
20. The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure
these deposits are removed regularly by disconnect the appliance and vacuum cleaning air vents
and grilles.
21. Do not place the heater on carpet, don’t place the cable under carpets. Arrange cord away from
traffic areas so that it will not be tripped over.
22. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
23. Do not store away until the heater cools down, store the heater in cool dry location when not in
use.
24. The heater must not be used if the glass panel is damaged.

三. Technical Specifications
Model
Rated Voltage
Rated Power
Frequency
Protective Class
GH-15F
120V~
1500W
50/60Hz
I
四. Operation
Operator Interface for GH-15F Remote Control Interface for GH-15F
1. Press the Power button and the product becomes standby, with the screen showing the current
ambient temperature (Note: After powering on, the product will automatically use the default
working temperature of 95℉.), time as 00:00, and the Frost-free function icon, without any other
icons. The frost-free function will only start in standby or after the end of timing, indicated by the
flashing border of the icon (Note: The Frost-free temperature is set higher than 41℉.). When the
heating is on, the frost-free function will stop, and the border of the frost-free icon stops flashing.
2.2. In the standby mode: Press "△" to rise temperature, "▽" to reduce the temperature. Press the
"TIME" button to set the power-on time (Note: In the timing mode, the border of the timing icon
keeps flashing.).

3. In the standby mode, press the "MODE" button and you can switch between Comfortable
mode , Economical mode , Frost-free mode and ECO mode . While heating, the
heating icon is shown and the border of the Comfortable mode icon flashes , which
means the machine is heating at a high level. Select the Frost-free mode. When the current
ambient temperature is lower than 41℉, the heater is heating. When the temperature rises to about
44℉, the heating is stopped. When the heat is applied, the icon is displayed. When the heating is
stopped, the icon is extinguished. Select the ECO mode. Select the ECO mode, the maximum
operating temperature is 64℉. When the ambient temperature is lower than 64℉, the ECO mode
is selected. When the ambient temperature reaches 64℉, the heater will be heated at full power
(high-level heating). The heater automatically to low-grade power. When the temperature is
reduced to 60 ℉, the product automatically returns to high-grade power. When the ambient
temperature rises to than 64 ℉, the product will automatically stop heating until the ambient
temperature drops to 60℉. At that time, the heating is resumed. When heated, the icon is
displayed and the icon is extinguished when heating is stopped. Select the Economy
mode , the heater automatically switches to low-grade heating. Select Comfort
mode and the heater will be in full power (high-level heating) heating.
4. Heating, press the "TIME" button, the temperature display will flash, you can use the "△" or "
▽" button to set the temperature, and automatically set the temperature after 10 seconds. Press the
"TIME" button, you can use the " △" or "▽" button to set the timing off time, the timing time
decreases over time. (In the timing mode , the timing icon is displayed.) (When timing is not
set, the time is shown as 00:00.)
5. Temperature setup: In the heating mode, you can set the desired room temperature (i.e.
Comfortable or Economical mode). The machine's working temperature ranges from 4℉to 95℉
and the temperature can be set between 59-95℉. When the ambient temperature is equal to the
preset temperature, the machine automatically switches from Comfortable mode to Economical
mode (i.e. from high-level heating to low-level heating mode), and the border of the Comfortable
icon stops flashing, with the border of the Economical icon flashing instead. When the
ambient temperature is 4℉higher than the preset temperature, the product stops heating (along
with the heating icon disappearing, Comfortable mode icon border stopping flashing).
When the ambient temperature is 4 ℉lower than the preset temperature, the machine will
automatically switch back to Comfortable working mode (showing the heating icon , and
flashing the border of the Comfortable mode icon .)

6. Timing setup: In the Frost-free mode, press "TIME" button to set the time to automatically turn
on the machine. In the heating mode, you can set up the time to automatically shut down. (The
displayed time will decrease along with the time passing by.)
7. Attention: All the above operation also can be realized by remote controller.