Homelegance 1967W-5 User manual

ASSEMBLY INSTRUCTIONS /
INSTRUCTION D' ASSEMBLANGE
Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and
hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed,
have your dealer contact us and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to avoid damage or
scratches when placing furniture on a wood floor or other hard surface, and to limit
indentation and prevent discoloration if placing on carpet.
MADE IN MALAYSIA
FABRIQUER AU MALAYSIA
PAGE 1 OF 2 /
PAGE 1 DE 2
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
NO COM PONENT SKETCH QTY
A
MIRROR / MIROIR
1 PC
B
MIRROR SUPPORT / MIROIR
SOUTIEN
2
PCS
C
DRESSER / COMMODE
1 PC
PART LIST/ LISTE DE PIECE
NO DESCRIPTION SKETCH SIZE QTY
1
JCBC BOLT/
BOULON M6 x 35MM
4
PCS
2
JCBC BOLT/
BOULON M6 x 40MM
4
PCS
3
SPRING WASHER/ RONDELLE D'
ARRET
1/4" x
2mm(Thickness)
8
PCS
4
FLAT WASHER/ RONDELLE PLATE 1/4" ID x 19mm x
1mm(Thickness)
8
PCS
5
ALLEN KEY / CLE ALLEN M4 x 65MM
1 PC
6
PAN HEAD SCREW / VIS PAN
HEAD M3.5 x 16MM
2
PCS
STEP 1 / ETAPE 1 :
ARRO W MA RKING FACING UPWA RD
B
2
3
4
5
A
WARNING !!!
USE JCBC M6 x 40MM
Printed with FinePrint trial version - purchase at www.fineprint.com

MADE IN MALAYSIA
FABRIQUER AU MALAYSIA
PAGE 2 OF 2 /
PAGE 2 DE 2
NOTE : MUST TIGHTEN SCREWS PERIODICALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 2 / ETAPE 2 :
**BACK VIEW
B
A
C
1
35
4
C
6
2.2
A
**BACK VIEW
2x
Tighten the Pan head screw (6) as shown
(3.3).
2.1
WARNING !!!
USE JCBC M6 x 35MM
STEP 3 / ETAPE :
COMPLETE ASSEMBLY
DOOR
Anti - Tip Kit
Printed with FinePrint trial version - purchase at www.fineprint.com