Homelegance 4615-F1 User manual

page 1 of 2
4615-F1/F2/F3/F4
LIFT TOP STORAGE BENCH W/PULL-OUT BED
Assembly Instruction
Thank you for your purchase of the Homelegance lift top
storage bench w/pull-out bed. Please check below instruction
for assembly.
NOTE:Do not tighten the bolts until all parts are
assembled. Legs,caster and hardware are stored
in the bottom of the bench, please take out for
assembly.
Pull Out Bed
Screw #8 x 45mm
Pillow
Screw #8 x 25mm
Plastic Leg Ø2"
NO. DRAWING QTY DESCRIPTION
A1pc
B
C
E
F
D
1pc
4pcs
8pcs
4pcs
4pcs
PART LIST
Caster
HARDWARE LIST

Configuration
STEP 1
Legs,Casters and hardware are packed in the small box
and stored in the bottom of the bench. Please use scissors
to cut straps and take out for assembly.
AD
STEP 2
A
F
STEP 3
AA
#E
#C
STEP 4
Pillow inside the storage.please cut the red strap and take
out pillow.
STEP 5 STEP 6
B
Lay back part slot as a bed.
B
AAA
CARE INSTRUCTION FOR FABRIC:
In order to maintain the original appearance of your fabric furniture,
please follow below simple care procedure:
Avoid exposing furniture directly to sunlight or heating and air conditioning
outlets.Exposure to sunlight or heating and air conditioning outlets will
fade/damage fabric.
Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
It is recommended to install protective pads under all legs and supports to
avoid damage or scratches when placing furniture on a wood floor or other
hard surface and to limit indentation and prevent discoloration if placing on
carpet.
page 2 of 2
red strap
PART
red strap
Velcro
B