Homelegance 5803RF-36 User manual

ASSEMBLY INSTRUCTION
ITEM NO : 5803RF-36
COUNTER HEIGHT TABLE TOP W/4 DRAWERS +
TABLE BASE
Thank you for purchasing the product. Please take time to read and follow the instruction below.
Check that you have all parts and hordware before assembly. Parts apparently missing are often
found in the packing materials. If you do not have all the parts listed, have your dealer contact us
and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to avoid damage or scratches
when placing furniture on a wood floor or other hard surcafe, and to limit indentation and prevent
discoloration if placing on carpet.
PARTS LIST
No Sketch Description Quantity
Table Top 1PC
1
Table Legs 4PCS
2
HARDWARE LIST
No Description Sketch Quantity
AJCBB
- M8 x 1.25 x 70mm 8PCS
BSpring Washer
- 5/16" x 23/64" x 33/64" x 0.06" 8PCS
CFlat Washer
- 5/16" x 23/64" x 55/64" x 0.04" 8PCS
DAllen Key
- M5 x 70mm 1PC
MADE IN MALAYSIA
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
* HAREWARE ARE SET IS IN 5803RF-36 FOR ASSEMBLY.

C
B
A
D
2
1
MADE IN MALAYSIA
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
STEP 2
STEP 1
ASSEMBLY INSTRUCTION
ITEM NO : 5803RF-36
COUNTER HEIGHT TABLE TOP W/4 DRAWERS +
TABLE BASE
COMPLETED