Homelegance BF-1UP-CT User manual

Assembly Instruction
1. Part Identification
Legs, Retainer Bar(s), Power Supply and Remote Control are in the boxes, please
take out all components for assembly. It is tool-less assembly. No tool needed.
page 1 of 4
Item No. :
BF-1UP-ET
BF-1UP-CT
BF-1UP-Q
BF-1UP-EK
BF-1UP-CK
Description:
Twin XL Wireless Upholstered Adjustable Bed Base
CK Twin Wireless Upholstered Adjustable Bed Base
Queen Wireless Upholstered Adjustable Bed Base
Eastern King Wireless Upholstered Adjustable Bed Base
California King Wireless Upholstered Adjustable Bed Base
NO Drawing Qty Description
Wireless Upholstered
Adjustable Bed Base
A 1
3 section Legs
6B
Adappor
1C
Plug
1D
1 Retainer Bar for ET/CT/Q
2 Retainer Bars for EK/CK
1
2
E
Remote Control
AAA battery
Control Box(Pre-assembled)
1
2
1
F
G
H

2. Assembly Steps
page 2of 4
Step＃2
Step＃3
F
Step＃1
E
A
C
H
D
B*6
F
G
G
A

3. How to use Remote Control
4. Convenient “Flat Button” on Control Box
In case of power outrage or malfunction of the remote, press the ""Pair/ Flat" button to bring the bed frame
to flat position.
Warning:
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug bed frame from outlet before adding or removing accessories.
2. Unplug bed frame from outlet before moving it.
3. Do not move or drag the bed frame when plug is attached to the outlet.
4. Close supervision is necessary when this bed frame is used by, or near children, pets or persons
that may need assistance.
5. Use bed frame only for its intended use as described in instructions
6. Never operate the bed frame if it has a damaged cord or plug for any reason.
7. Keep the cord away from heated surfaces or appliances.
8. Never drop or insert any object into any bed opening.
9. To disconnect, remove plug from outlet.
UBL FLAT
Head-up button
Foot-up button
Under-Bed Light On/Off
Head-down button
Foot-down button
One Press Flat position
press to adjust the head position down
press to adjust the foot position down
press to turn on LED light; press
again to turn off.
press to go back to flat position； the
process can be interrupted by pressing
any other buttons.
press to adjust the foot position up
press to adjust the head position up
page 3 of 4

5. Remote Pairing and Synchronizing
1 Remote F1 pairing with Base H1.
F1
H1
UBL FLAT
H1 F1
Press 3 buttons at the same time.
If using 2 bases, remote F1 controls Base H1 and H2 simultaneously.
(Remote F1 already is paired with Base H1)
F1
H1 H2
UBL FLAT
F1
H2
Press 3 buttons at the same time.
H2
2
Both remote F1 and F2 control Base H1 and H2.
(Remote F1 already is paired with Base H1 )
3
UBL FLAT
F2
( Follower)
UBL FLAT
F1
FIRST
within
10 seconds
UBL FLAT
F2
If you don't use Remote F2, press
Head-Up and Foot-Down to disable
the above feature
H1
H2
4 Using a sync cable(not included)
H1
F1
H2
F2
H1
page 4of 4