Honeywell F112C User manual

The Honeywell Trademark is used under license from Honeywell
Intellectual Properties, Inc. by Air-Pure Systems.
Honeywell International Inc. makes no representations or warranties
with respect to this product
69-1506-4
F112A,C; F113A,C
Portable Air Cleaners
OWNER’S GUIDE

69-1506-4 2
HOW YOUR PORTABLE AIR CLEANER WORKS
Your air cleaner is effective at removing airborne particulates like dust mite allergens,
pollen, mold spores, bacteria, dust, soot, and tobacco smoke particles. It is also
effective at reducing annoying odors like tobacco smoke, chemical odors, and odors
from cooking, when equipped with a CPZ canister.
You can choose models with these filters (all have a carbon prefilter that helps reduce
odors and extend the HEPA filter life):
• a 99.97% High-Efficiency Particulate Air (HEPA) filter that provides high-efficiency
removal of particulates.
• a HEPA filter that removes particulates and a CPZ™ canister that removes volatile
organic compounds (VOC) and odor. This high filtration and adsorption efficiency
enables the air cleaner to remove many of the troublesome particles, gases and
odors from the indooor air.
Your unit is one of these models:
F112A,C: 150 cfm, 120V, 60 Hz, 1.85A. Both models are two-speed. Model A has a
HEPA filter and model C has a HEPA filter with a CPZ™ canister.
F113A,C: 300 cfm, 120V, 60 Hz, 1.5A. Both models are three-speed. Model A has a
HEPA filter, model C has a HEPA filter with a CPZ™ canister.

3 69-1506-4
OPERATING YOUR AIR CLEANER
IMPORTANT
If you have purchased an F112C or an F113C model, you will need to open
the air cleaner and remove the plastic packaging on the CPZ filter. To
reassemble the unit, follow the instructions in the Changing Your Filters sec-
tion.
Your air cleaner has a power cord that plugs into a 120 Vac electrical outlet. Before
plugging it in and operating your air cleaner, carefully read all instructions:
WARNING
Electrical Shock Hazard.
Can cause personal injury or equipment damage.
Do not use air cleaner with any solid-state speed control device.
Keep foreign objects from blocking the air outlets or intakes, or from entering
the ventilation or exhaust opening.
1. Be sure the unit is fully assembled and in an upright position before plugging it
in.
2. Do not use the air cleaner outdoors.
3. Place the air cleaner where the cord and unit are not obstacles to employee and
customer traffic flow.
4. Plug the air cleaner polarized plug (one blade is wider than the other) into the
polarized outlet as designed. Do not attempt to force the plug into the outlet;
reverse the plug and then if it does not fit into the outlet, contact a qualified elec-
trician.
5. If you must use an extension cord, use a heavy duty cord with adequate line
size.
6. Do not run the power cord under carpets or rugs.
7. Keep the cord away from hot surfaces.
8. Do not use the air cleaner where combustible gases or vapors are present.
9. Do not expose the air cleaner to rain or operate near water, in a bathroom, or
other damp location.
10. Do not sit, stand or place heavy objects on the air cleaner.
11. Always unplug when not in use and before servicing. To disconnect the air
cleaner, first turn the speed control to the Off position before removing the plug
from the outlet.
12. Do not use the air cleaner with a damaged cord or plug or if the unit was
dropped, damaged or is malfunctioning.

69-1506-4 4
MAINTAINING YOUR AIR CLEANER
CAUTION
Filter Washing Hazard.
Washing can damage prefilter, HEPA filter and CPZ canister.
Do not wash filters.
Replace filters according to recommended schedule.
Determining When to Replace Your Filters
With proper maintenance, your air cleaner is designed to provide years of high-
efficiency air cleaning. Your air cleaner contains up to three filters, depending on
model: a carbon prefilter, a HEPA filter and a CPZ canister on some models.
Replacing Your Prefilter Every Three Months (Quarterly)
The carbon prefilter captures large airborne particles and helps reduce odors.
NOTE: Do not operate the air cleaner without the carbon prefilter.
IMPORTANT:
Replace the prefilter every three months. If the unit is used in a smoking or
other persisting unpleasant odor environment, consider purchasing a model
with a CPZ canister (F112C or F113C). See Table 1 to select filter part num-
bers.
Replacing Your Primary HEPA FIlter and CPZ Canister
The primary HEPA filter and CPZ canister life expectancy depends on the
concentration of contaminants in the environment where the air cleaner is installed. If
there are sources of large amounts of particle generation (such as woodworking or
heavy smoking), the useful life of the prefilter and HEPA filter and CPZ canister may be
reduced.
It is recommended changing the HEPA filter and CPZ canister based on operating
conditions—every three years for light usage, two years for normal usage and one
year for heavy usage. See Table 1 to select filter part numbers.
Whenever the combined air resistance of the carbon filter and the HEPA filter and CPZ
canister becomes excessive due to the amount of contaminants captured, the air
cleaner begins to audibly pulsate. Instead of a steady stream of air at the outlets, rapid
puffs of air can be felt.
When this occurs:
• The carbon prefilter may be clogged and needs replacing.
• The HEPA filter and CPZ canister need replacing if the unit continues to pulsate
after replacing the carbon prefilter.

5 69-1506-4
IMPORTANT
Replace the HEPA filter and CPZ canister every one to three years, depend-
ing on the environment where the air cleaner is operating.
Changing Your Filters
CAUTION
Electrical Shock Hazard.
Can cause personal injury or equipment damage.
Disconnect power before servicing equipment.
NOTE: No tools are required for disassembly or assembly.
1. Disassemble the unit as follows (see Fig.1):
a. Loosen the carrying handle by turning it counterclockwise.
b. Lift the grille cover from the unit.
c. Lift the HEPA filter with carbon prefilter from the base.
d. Remove the CPZ canister, if applicable.
e. Remove the two velcro strips from the top and bottom of the prefilter and
remove it from the HEPA filter.
f. Wrap the new prefilteraround the HEPA filter and replace the top and bottom
velcro strips.
2. Reassemble the unit as follows:
a. Place the assembled HEPA filter with carbon prefilter on the base.
b. Replace the CPZ canister, if applicable.
c. Replace the grille cover.
d. Reattach the carrying handle and turn it clockwise until securely tight. Be
sure not to over-tighten.
Table 1. Selecting Your Replacement Filters.
Air Cleaner
Model No. Prefilter Part No. HEPA Filter Part No. CPZ Canister Part No.
F112A6003 38002 21500 N/A
F112C6001 38002 28720 32000232
F113A6001 38002 24000 N/A
F113C6009 38002 28600 32000231