Honeywell QUANTUME IS3480 User manual

IS3480 QuantumE
QuantumT 3580
Fusion 3780
Orbit 7120/7180
Solaris 7820
Quick Start Guide
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.br.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choď na www.honeywellaidc.com
日本語 : www.honeywellaidc.com をご覧ください。
如要到中国 www.honeywellaidc.com（简体）。
한글 www.honeywellaidc.com 로이동합니다

1
Getting Started
Turn off the computer’s power before connecting
the scanner, then power up the computer once the
scanner is fully connected.
Scanner Host Ports
QuantumT 3580
Fusion 3780
IS3480 QuantumE
Orbit 7120/7180 Solaris 7820

2
Connecting the Scanner
Serial
(RS232)
Keyboard
Wedge
optional
adapter cable
Connect to
scanner’s host
port
Connect to
scanner’s host
port
Connect to
scanner’shost
port
USB

3
Recall Defaults
Scan Recall Defaults to reset all standard product
default settings.
³999998
Recall Defaults

4
Interface Selections
USB
³4164140
³999970
³416400
USB Keyboard
Emulation
Load Integrated Full
Speed USB IBM/OEM
Defaults
USB Serial Emulation

5
RS232
Keyboard Wedge
Keyboard Country
Scan a bar code to select one of the following
keyboard country templates. Refer to your
Configuration Guide for additional keyboard country
settings.
³415554
RS232
³5155143
Keyboard Wedge Emulation
³416260
United States

6
³416210
³416200
United Kingdom
Belgium
³416230
Germany/Austria
³416220
France

7
ALT Mode
Use ALT Mode when bar codes or formatting rules
include Extended ASCII data that might not have a
direct keyboard equivalent. If your bar code
contains special characters from the extended
ASCII chart, scan the Enable 3-digit ALT Mode or
Enable 4-digit ALT Mode codes below. The key
sequence based on the ASCII value would be sent
to the host (e.g., if an asterisk (*) is contained in the
bar code, the host receives ALT + 0 + 4 + 2 (3-digit).
If an “Ü” is contained in the bar code, the host
receives ALT + 0 + 2 + 2 + 0 (4-digit). You may also
se ALT Mode when no "Keyboard Country" bar
code that matches your keyboard exists.
³416250
³416240
Spain
Italy

8
Note: Scan ALT mode after scanning the
appropriate Keyboard Country code.
³116217
Enable 3-digit ALT Mode
³116716
³116706
Enable 4-digit ALT Mode
Disable 3-digit ALT Mode
Disable 4-digit ALT Mode
³116207
³116716

9
RS232 Communication Commands
³115816
RTS/CTS
Handshaking On
³115914
XON/XOFF On
³115913
ACK/NAK On
³116013
8 Data Bits

10
Power Save Modes
Scan the following bar codes to have the scanner to
enter/exit from various power save modes.
³116014
1 Stop Bit
³316045
No Parity
³319410
Blink

11
³319420
³319430
³118617
Laser Off Power Save
Laser and Motor Off
Power Save
Power Save Mode Always
³818600
Power Save Mode Never

12
Host Scanner Commands
Scan the Enable D/E Disable bar code below to
disable scanning after the scanner receives an
ASCII “D” from the host. Scanning is enabled when
the scanner receives and ASCII “E”.
³118015
³118005
Enable D/E Disable
Disable D/E Disable

13
Scan the Activate DC2 Character bar code below
initiate scanning with the receipt of a DC2 character
(^R, 124).
Scanning the Transmit Serial Number code
transmits the scanner’s serial number.
³118100
Do Not Activate
DC2 Character
³118110
Activate DC2 Character
³999969
Transmit Serial Number

14
LED Options
Scan the Laser LED Off/Scan LED Off bar code to
turn off the laser/scan LED while scanning bar
codes. The LEDs continue to illuminate for all other
functions.
³243130
³243132
Laser LED Off
Scan LED Off

15
Prefix
Scan one of the following bar codes to program
your scanner to add or remove a start of text
character, or AIM, NCR, or Nixdorf identification
characters before each bar code.
³116615
³116605
STX Prefix On
STX Prefix Off
³107915
AIM ID Prefix On

16
³107905
AIM ID Prefix Off
³107901
³107911
NCR Prefix On
NCR Prefix Off
³107917
Nixdorf Prefix On

17
Suffix
Scan one of the following bar codes to program
your scanner to add or remove a carriage return,
line feed, tab, or end of text after each bar code.
³107907
Nixdorf Prefix Off
³116613
³116603
CR Suffix On
CR Suffix Off

18
³116612
LF Suffix On
³116602
LF Suffix Off
³116610
Tab Suffix On
³116600
Tab Suffix Off