
Honeywell • 0
INDEX
Document: DPD00487D
Version release date: 10.6.11
1. Safety ..................................................................................................................2
1.1 Danger ............................................................................................................................ 2
1.2 Warnings......................................................................................................................... 3
1.3 Earthing and earth fault protection.................................................................................. 3
1.4 EMC levels...................................................................................................................... 4
1.4.1 Total Harmonic Distortion (THD)..................................................................................... 5
2. Receipt of delivery.............................................................................................6
2.1 Type designation code.................................................................................................... 7
2.2 Unpacking and lifting the drive........................................................................................ 8
2.2.1 Lifting frames MR8 and MR9 .......................................................................................... 8
2.3 Accessories................................................................................................................... 10
2.3.1 Size MR4 ...................................................................................................................... 10
2.3.2 Size MR5 ...................................................................................................................... 10
2.3.3 Size MR6 ...................................................................................................................... 11
2.3.4 Size MR7 ...................................................................................................................... 11
2.3.5 Size MR8 ...................................................................................................................... 12
2.3.6 Size MR9 ...................................................................................................................... 12
2.4 ‘Product modified’ sticker .............................................................................................. 13
3. Mounting...........................................................................................................14
3.1 Dimensions ...................................................................................................................14
3.2 Cooling.......................................................................................................................... 18
4. Power cabling ..................................................................................................20
4.1 UL standards on cabling ............................................................................................... 21
4.1.1 Cable dimensioning and selection ................................................................................ 21
4.2 Cable installation...........................................................................................................26
4.2.1 Frames MR4 to MR7..................................................................................................... 27
4.2.2 Frames MR8 and MR9.................................................................................................. 33
4.3 Installation in corner-grounded network........................................................................ 43
5. Control unit ......................................................................................................44
5.1 Control unit cabling ....................................................................................................... 45
5.1.1 Control cable sizing.......................................................................................................45
5.1.2 Control terminals and DIP switches .............................................................................. 46
5.2 I/O cabling and fieldbus connection.............................................................................. 49
5.2.1 Prepare for use through Ethernet ................................................................................. 49
5.2.2 Prepare for use through MS/TP.................................................................................... 51
5.2.3 RS485 cable data ......................................................................................................... 55
5.3 Changing the battery for Real Time Clock (RTC) ......................................................... 56
5.4 Galvanic isolation barriers............................................................................................. 57
6. Commissioning................................................................................................58
6.1 Commissioning of the drive........................................................................................... 59
6.2 Running the motor ........................................................................................................ 59
6.2.1 Cable and motor insulation checks............................................................................... 59
6.3 Installation in IT system ................................................................................................ 61
6.3.1 Frames MR4 to MR6..................................................................................................... 61
6.3.2 Frames MR7 and MR8.................................................................................................. 62
6.3.3 Frame MR9 ................................................................................................................... 63