Honeywell Dolphin 75e User manual

Dolphin™ 75e
with Windows Embedded 8.1 Handheld
User’s Guide

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been
made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material. HII disclaims any and all responsibility and liability for the
selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Microsoft, Windows, Windows Embedded Handheld, Windows Phone, Outlook, Cortana, OneDrive and the Windows logo are
either registered trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and
are the property of their respective owners.
Patents
For patent information, see www.hsmpats.com.
Copyright 2015 Honeywell International Inc. All rights reserved.

iii
Customer Support
Product Service and Repair .................................................................................................. xi
Contacting Customer Support............................................................................................... xi
Limited Warranty................................................................................................................... xi
Warranty Disclaimer: Proper Use of a Touch Screen Mobile Device.................................... xi
How to Extend Your Warranty .............................................................................................. xi
Send Feedback..................................................................................................................... xi
Chapter 1 - Getting Started
Out of the Box ......................................................................................................................1-1
Memory Card Specifications ..........................................................................................1-1
Initial Setup for Dolphin 75e Terminal..................................................................................1-1
Unlocking the Screen...........................................................................................................1-5
Customizing the Start Screen and Accessing Apps.............................................................1-6
Accessing the Action Center from the Status Bar................................................................1-7
Customizing the Quick Actions ......................................................................................1-7
Changing Notifications ...................................................................................................1-8
Common Status and Notification Icons ..........................................................................1-8
About Cortana Voice Assistant ......................................................................................1-8
Using the Search Bar .....................................................................................................1-9
Using Speech.................................................................................................................1-9
Navigation/Function Buttons ..............................................................................................1-10
Remap a Button Function ............................................................................................1-10
Virtual Keyboard ................................................................................................................1-10
Using the Virtual Keyboard ..........................................................................................1-11
Turning Power On/Off ........................................................................................................1-11
Turning Sleep Mode (Suspend Mode) On/Off ...................................................................1-11
Turning Airplane Mode On/Off ...........................................................................................1-11
Replacing the Battery.........................................................................................................1-12
Restarting the Terminal......................................................................................................1-13
Resetting the Terminal.......................................................................................................1-13
Connecting the Terminal to a Computer (PC) via a USB Connection................................1-14
Using the Windows Phone App to Connect .................................................................1-14
Using File Explorer or Windows Explorer to Transfer Files..........................................1-14
Changing USB Permissions and Notifications .............................................................1-15
Chapter 2 - Hardware Overview
Standard Configuration for the Dolphin 75e.........................................................................2-1
Peripherals for the Dolphin 75e ...........................................................................................2-1
Accessories for the Dolphin 75e ..........................................................................................2-2
Holsters (Model HOLSTER-2 and 6000-HOLSTER) .....................................................2-2
Wrist Lanyard (Model SL-LANYARD-1) .........................................................................2-2
Stylus (Model 75e-Stylus) ..............................................................................................2-2
Battery Door Kits ............................................................................................................2-2
Battery (Models 70e-BTSC and 70e-BTEC) ..................................................................2-2
Table of Contents

iv
Features of the Dolphin 75e ................................................................................................ 2-3
Front, Bottom, and Right Panels.................................................................................... 2-3
Back, Top, and Left Panels............................................................................................ 2-6
The I/O Connector ...............................................................................................................2-8
Battery ................................................................................................................................. 2-8
Replacement Battery Specifications .............................................................................. 2-8
Battery Authorize Failed ................................................................................................ 2-9
Charging Options........................................................................................................... 2-9
Charging Times ............................................................................................................. 2-9
Understanding the Battery Charge Status LED Indicator ............................................ 2-10
Important Charging Guidelines .................................................................................... 2-10
Checking the Battery Health........................................................................................ 2-10
Managing Battery Power ............................................................................................. 2-11
Storing Batteries .......................................................................................................... 2-13
Guidelines for Battery Pack Use and Disposal ............................................................ 2-13
System Resets .................................................................................................................. 2-14
Hardware Maintenance ..................................................................................................... 2-14
Installing a Memory Card................................................................................................... 2-14
Installation and/or Replacement .................................................................................. 2-14
Chapter 3 - Using the Scan Image Engine
Overview.............................................................................................................................. 3-1
Image Engine Specifications ............................................................................................... 3-1
Field of View .................................................................................................................. 3-1
Depth of Field ................................................................................................................ 3-1
Supported Bar Code Symbologies ............................................................................... 3-2
Decoding ............................................................................................................................. 3-2
Using the Scan Demo to Decode a Bar Code ............................................................... 3-2
Configuring the Scan Demo Application ........................................................................ 3-4
Aiming Beam ................................................................................................................. 3-5
Chapter 4 - Using the Color Camera
Overview.............................................................................................................................. 4-1
Opening the Camera app and Adjusting the Settings ......................................................... 4-1
Adjusting the Camera/Video Settings............................................................................ 4-1
Taking a Photo .................................................................................................................... 4-1
Taking a Burst Photo ........................................................................................................... 4-2
Uploading Pictures and Videos ........................................................................................... 4-3
Chapter 5 - Settings
Overview.............................................................................................................................. 5-1
Network and Wireless Settings............................................................................................ 5-1

v
Personalization .................................................................................................................... 5-1
Changing Start and the Screen Theme ......................................................................... 5-1
Changing the Sound Settings........................................................................................ 5-2
Managing Security and Customizing the Screen Lock .................................................. 5-2
Changing App Specific Notifications.............................................................................. 5-3
Selecting What to Sync.................................................................................................. 5-4
Setting Up Quiet Hours with Cortana............................................................................. 5-5
Email + Messaging Accounts .............................................................................................. 5-5
Adding a Microsoft Account........................................................................................... 5-5
Adding Additional Accounts........................................................................................... 5-5
Adding an Exchange Account........................................................................................ 5-6
Modifying or Removing an Account ............................................................................... 5-6
Workplace Accounts............................................................................................................ 5-7
Adding a Workplace Account......................................................................................... 5-7
Deleting a Workplace Account....................................................................................... 5-7
System................................................................................................................................. 5-7
Change the Terminal Name........................................................................................... 5-7
Viewing Software and Hardware information................................................................. 5-8
Performing a Factory Reset (Clean Boot)...................................................................... 5-8
Changing the Display Settings....................................................................................... 5-8
Viewing Storage Statistics and Managing Apps and Files............................................. 5-9
Changing the Battery Settings..................................................................................... 5-10
Changing USB Settings............................................................................................... 5-10
Using the SD card for Manual Flash............................................................................ 5-10
Time and Language Settings............................................................................................. 5-11
Changing the Date, Time, or Time Zone ..................................................................... 5-11
Changing the Terminal Language ............................................................................... 5-12
Changing the Terminal Region .................................................................................... 5-12
Adding and Modifying Keyboards................................................................................ 5-12
Input and Accessibility ....................................................................................................... 5-13
Customizing Services and System Features for Accessibility ..................................... 5-13
Configuring the Speech Feature.................................................................................. 5-13
Privacy............................................................................................................................... 5-14
Changing the Location Service Settings...................................................................... 5-14
Modifying and Viewing App Permissions..................................................................... 5-14
Update and Backup ........................................................................................................... 5-14
Enabling Automatic Updates ....................................................................................... 5-15
Backup Your Apps and Settings .................................................................................. 5-15
Performing a Manual Backup ...................................................................................... 5-15
Backup Your Photos and Videos................................................................................. 5-15
Deleting a Backup........................................................................................................ 5-16
Extras ................................................................................................................................ 5-16
Battery Status Settings ................................................................................................ 5-16
Changing the Button Illumination Settings................................................................... 5-16
Modifying the Smart Sensors....................................................................................... 5-16
Modifying Wi-Fi Radio Settings.................................................................................... 5-17

vi
Chapter 6 - Communication
Wireless & Network Settings ............................................................................................... 6-1
Connecting the Terminal to a Wireless Network ................................................................. 6-1
Wi-Fi Network Connections ................................................................................................. 6-1
Turning Wi-Fi Networking On or Off .............................................................................. 6-2
Connecting to a Wi-Fi Network...................................................................................... 6-2
Connecting to a Hidden Wi-Fi Network.......................................................................... 6-2
Managing Wi-Fi Networks.............................................................................................. 6-2
Advanced Wi-Fi Radio Settings and Security...................................................................... 6-3
Modifying the Channel Settings..................................................................................... 6-3
Changing the Roaming Settings .................................................................................... 6-3
Enabling Protected Management Frame (PMF) or AKM with SHA256 Key Derivation. 6-4
Airplane Mode ..................................................................................................................... 6-4
Virtual Private Networks (VPN) ........................................................................................... 6-4
Adding a VPN Profile..................................................................................................... 6-4
Connecting to a VPN ..................................................................................................... 6-5
Disconnecting the VPN.................................................................................................. 6-6
Editing or Deleting a VPN Profile................................................................................... 6-6
Viewing the VPN Profile Status ..................................................................................... 6-6
Working with Certificates ..................................................................................................... 6-6
Installing a Certificate via Internet Explorer ................................................................... 6-6
Installing a Certificate via email ..................................................................................... 6-6
Installing a Certificate via MDM ..................................................................................... 6-7
Removing Certificates.................................................................................................... 6-7
Ethernet Communication ..................................................................................................... 6-7
Viewing Network Adapter Information and Renewing/Releasing IP Addresses.................. 6-7
Using the Ping App to Test a Network Connection........................................................ 6-8
Changing How Data Packets are Routed...................................................................... 6-9
Chapter 7 - Working with Bluetooth and NFC Technology
Bluetooth Technology.......................................................................................................... 7-1
Turning the Bluetooth Radio On or Off .......................................................................... 7-1
Pairing and Trusted Devices.......................................................................................... 7-1
Connecting to Other Bluetooth Devices......................................................................... 7-1
Unpairing Bluetooth Devices ......................................................................................... 7-1
Making the Terminal Discoverable ................................................................................ 7-2
Bluetooth Advanced Options ......................................................................................... 7-2
Sharing Photos and Videos ........................................................................................... 7-2
Near Field Communication (NFC) Technology.................................................................... 7-2
Hardware Requirements................................................................................................ 7-3
Security Recommendation............................................................................................. 7-3
NFC Settings ................................................................................................................. 7-3
Sharing Photos and Videos ........................................................................................... 7-3
Reading NFC Tags........................................................................................................ 7-4

vii
Chapter 8 - Dolphin 70e Black HomeBase (Model 70e-HB)
Overview.............................................................................................................................. 8-1
Unpacking the HomeBase................................................................................................... 8-1
Optional Equipment ....................................................................................................... 8-1
Charging Overview .............................................................................................................. 8-1
Convenient Storage............................................................................................................. 8-1
Capacity............................................................................................................................... 8-2
Dimensions.......................................................................................................................... 8-2
Weight ................................................................................................................................. 8-2
Parts and Functions.............................................................................................................8-3
Front Panel ................................................................................................................... 8-3
Back Panel ......................................................................................................................... 8-4
Bottom Panel ....................................................................................................................... 8-4
Power .................................................................................................................................. 8-4
Connecting Power to the HomeBase .................................................................................. 8-5
Charging the Main Battery................................................................................................... 8-5
Charging a Spare Battery in the Auxiliary Battery Well ....................................................... 8-5
Communication.................................................................................................................... 8-6
Requirements ................................................................................................................ 8-6
Establishing USB Communication ................................................................................. 8-6
Mounting the HomeBase ..................................................................................................... 8-6
Optional DIN Rail Mount................................................................................................ 8-6
Additional Hardware ...................................................................................................... 8-6
Installing the DIN Rail .................................................................................................... 8-7
Chapter 9 - Dolphin 70e Black eBase (Model 70e-EHB)
Overview.............................................................................................................................. 9-1
Unpacking the eBase .......................................................................................................... 9-1
Optional Equipment ....................................................................................................... 9-1
Charging Overview .............................................................................................................. 9-1
Convenient Storage............................................................................................................. 9-1
Capacity............................................................................................................................... 9-1
Dimensions.......................................................................................................................... 9-2
Weight ................................................................................................................................. 9-2
Parts and Functions.............................................................................................................9-2
Front Panel .................................................................................................................... 9-2
Back Panel ......................................................................................................................... 9-3
Bottom Panel ....................................................................................................................... 9-4
Power .................................................................................................................................. 9-4
Connecting Power to the eBase .......................................................................................... 9-5
Charging the Main Battery................................................................................................... 9-5
To Power a Terminal and Charge its Main Battery.............................................................. 9-5
Charging a Spare Battery in the Auxiliary Battery Well ...................................................... 9-5
Communication.................................................................................................................... 9-6
Establishing Ethernet Communication........................................................................... 9-6
Establishing USB Communication ................................................................................. 9-6
Mounting the eBase............................................................................................................. 9-7

viii
Chapter 10 - Dolphin 70e Black Mobile Base (Model 70e-MB)
Overview............................................................................................................................ 10-1
Charging Overview ............................................................................................................ 10-1
Convenient Storage........................................................................................................... 10-1
Dimensions........................................................................................................................ 10-1
Weight ............................................................................................................................... 10-1
Mobile Base Components ................................................................................................ 10-2
Adjustable Arm with Suction Cup Base for Windshield Mounting ..................................... 10-2
Mounting the Mobile Base ................................................................................................. 10-3
Safety Precautions....................................................................................................... 10-3
Installation.................................................................................................................... 10-3
Charging the Main Battery................................................................................................. 10-4
To Power a Terminal and Charge its Main Battery...................................................... 10-5
Removing the Cable .......................................................................................................... 10-6
Chapter 11 - Dolphin 70e Black ChargeBase (Model 70e-CB)
Overview............................................................................................................................ 11-1
Unpacking the ChargeBase............................................................................................... 11-1
Charging Overview ............................................................................................................ 11-1
Convenient Storage........................................................................................................... 11-1
Capacity............................................................................................................................. 11-1
Dimensions........................................................................................................................ 11-2
Weight ............................................................................................................................... 11-2
Parts and Functions........................................................................................................... 11-2
Front Panel .................................................................................................................. 11-2
Dock LEDs................................................................................................................... 11-2
Back Panel ........................................................................................................................ 11-3
Power Supply Connector ............................................................................................. 11-3
Bottom Panel ..................................................................................................................... 11-3
Power ................................................................................................................................ 11-3
Connecting Power to the ChargeBase ....................................................................... 11-4
Charging the Main Battery........................................................................................... 11-4
To Power a Terminal and Charge its Main Battery...................................................... 11-4
Mounting the ChargeBase................................................................................................. 11-4
Optional DIN Rail Mount.............................................................................................. 11-5
Additional Hardware .................................................................................................... 11-5
Installing the DIN Rail .................................................................................................. 11-5
Chapter 12 - Dolphin 70e Black Net Base (Model 70e-NB)
Unpacking the Net Base.................................................................................................... 12-1
Optional Equipment ..................................................................................................... 12-1
Charging Overview ............................................................................................................ 12-1
Convenient Storage........................................................................................................... 12-1
Capacity............................................................................................................................. 12-1
Dimensions........................................................................................................................ 12-2
Weight ............................................................................................................................... 12-2

ix
Parts and Functions........................................................................................................... 12-2
Front Panel .................................................................................................................. 12-2
Bottom Panel ..................................................................................................................... 12-4
Power ................................................................................................................................ 12-4
Connecting Power to the Net Base.............................................................................. 12-4
Charging the Main Battery........................................................................................... 12-4
To Power a Terminal and Charge the Main Battery .................................................... 12-4
Communication.................................................................................................................. 12-5
Establishing Ethernet Communication......................................................................... 12-5
Bottom Panel ............................................................................................................... 12-5
Optional DIN Rail Mount.............................................................................................. 12-6
Additional Hardware .................................................................................................... 12-6
Installing the DIN Rail .................................................................................................. 12-6
Appendix A - Dolphin 75e Terminal Agency Information
Label Locations ...................................................................................................................A-1
Model Number and Serial Number ................................................................................A-1
RF Exposure Information (SAR)..........................................................................................A-1

x

xi
Customer Support
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service centers throughout the world. To find your
service center, go to www.honeywellaidc.com and select Support > Contact Support > Service and Repair. Contact your
service center to obtain a Return Material Authorization number (RMA #) before you return the product. To obtain warranty or
non-warranty service, return your product to Honeywell (postage paid) with a copy of the dated purchase record.
For ongoing and future product quality improvement initiatives, the terminal comes equipped with an embedded device lifetime
counter function. Honeywell may use the lifetime counter data for future statistical reliability analysis as well as ongoing quality,
repair and service purposes.
Contacting Customer Support
To search our knowledge base for a solution or to log in to the Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
For our latest contact information, see www.honeywellaidc.com/locations.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Resources > Warranty.
The limited duration of the warranty for the Dolphin 75e is as follows:
• The duration of the limited warranty for terminals with an integrated imager is one year.
• The duration of the limited warranty for touch screens is one year.
The duration of the limited warranty for batteries is one year. Use of any battery from a source other than Honeywell may result
in damage not covered by the warranty. Batteries returned to Honeywell International Inc. in a reduced state may or not be
replaced under this warranty. Battery life will be greatly increased when following the battery instructions in this user's guide.
The duration of the limited warranty for the Dolphin 70e Black HomeBase, Dolphin 70e Black eBase, Dolphin 70e Black Net
Base, Dolphin 70e Black Mobile Base, Dolphin 70e Black ChargeBase, and the Common QuadCharger is one year.
Warranty Disclaimer: Proper Use of a Touch Screen Mobile Device
If your device has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your
finger or a Honeywell approved stylus. Using excessive force or a metallic object when pressing on the touch-screen may cause
damage to the tempered glass surface and may not be covered by the product's warranty.
How to Extend Your Warranty
Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued
coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative,
Customer Account Representative, or Product Service Marketing Manager from Honeywell International Inc., or your Authorized
Reseller.
Send Feedback
Your feedback is crucial to the continual improvement of our documentation. To provide feedback about this manual, please
contact the Technical Communications department directly at [e-mail].

xii

1 - 1
1
Getting Started
Out of the Box
Verify that the carton contains the following items:
• Dolphin 75e handheld computer (terminal)
• 1 GB, 2 GB or 4 GB industrial grade microSD™ memory card (optional)
• Rechargeable 3.7V Li-ion battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Product documentation
If you ordered accessories for your terminal, verify that they are also included with the order. Be sure to keep the original
packaging in case you need to return the Dolphin terminal for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC™ memory cards with
Dolphin terminals for maximum performance and durability. Contact a Honeywell sales representative for additional
information on qualified memory card options.
Initial Setup for Dolphin 75e Terminal
Step 1. Install the Battery
Before installing the main battery, read the Guidelines for Battery Pack Use and Disposal on page 2-13.
The terminal is shipped with the battery packaged separate from the unit. To install the battery, follow the installation steps
illustrated. For information on how to remove the battery, see Replacing the Battery on page 1-12.
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the
environmental rating of the terminal.
Note: Standard battery and standard battery door shown.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage
not covered by the warranty.
!
2
1
Battery Door Lock

1 - 2
Step 2. Charge the Battery
The power source for the Dolphin terminal is the 3.7V Li-ion rechargeable battery located under the battery door on the
back panel of the device. See Battery on page 2-8 for additional information on battery storage, use, and disposal.
Important: Removing the battery from the terminal erases all non-persistent memory. Always power off the terminal before
removing the battery. For information on how to remove the battery from the terminal, see Replacing the Battery
on page 1-12.
Before Initial Use
Dolphin terminals ship with the battery significantly discharged of power. After installing the battery in the terminal, charge
the battery with a Dolphin 75e compatible charging peripheral for a minimum of 4 hours for the standard battery pack or
6 hours for the extended battery pack. When using the 70e-USB Charge/Communication cable to charge from a 500mA
USB port on a host device, charge the battery for a minimum of 6 hours for the standard battery and 8 hours for the
extended battery.
Note: Inadequate source current may interfere with effective battery charging; see Important Charging Guidelines on page
2-10 for additional information.
Dolphin 75e model terminals are designed for use with the following charging devices and cables: 70e-HB, 70e-CB,
70e-EHB, 70e-NB, 70e-MB, 70e-MC, and 70e-USB ADAPTERKIT. See pages 2-1 and 2-2 for additional information on
peripherals and accessories.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
3
4
5
6
Apply pressure to the edges of the
battery door before engaging the lock to
ensure the door is properly closed.
!
!

1 - 3
Using the USB Charge/Communication Cable (Model 70e-USB ADAPTERKIT)
Dolphin 75e terminals ship with a USB Charge/Communication Cable and a power adapter with regional plug
adapters. The USB Charge/Communication cable provides two options for charging the terminal. Use the cable in
conjunction with the provided power supply adapter and plug adapter to charge the terminal from a power outlet
(Option 1) or connect the cable to a high-power USB port to charge from a host device (Option 2).
Warning: The terminal shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or
products that have completed the USB-IF compliance program when using the micro USB port as a
charging source.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell with an output rated at 5VDC and 1A with
the device.
Option 2: Charging from a high power USB port on a host device (PC)
Charging the battery through a USB port takes more time than direct charging using the provided power supply.
Inadequate source current may lengthen the charge time or prevent the battery from charging if the terminal is drawing
more current than supplied by the USB port. The maximum current supplied by a USB Host can vary from 100mA to
500mA. Do not attempt to charge the terminal from a 100mA source. An active Dolphin terminal uses more current
than supplied by a 100mA source causing the terminal to continue to draw power from the battery. See Important
Charging Guidelines on page 2-10 for additional information.
On Start , swipe left to view the App list. Select Settings > USB. Check the box next to “Notify me when I
connect to a slower charger”.
Note: Placing the terminal in Sleep (Suspend) mode while charging reduces the current draw of the terminal and
shortens the charging time of the battery.
USB Door
Plug Adapter
1
3
4
2
Micro USB Port
Power Adapter
5
Right Side Panel
of the Terminal
USB Charge/Communication Cable
USB Port
USB Door
1
3
2
Micro USB Port
Right Side Panel
of the Terminal
USB Charge/Communication Cable

1 - 4
Step 3. Power On and Set Up the Terminal
The first time you power up the Dolphin terminal, you have the option to set up your handheld using one of the following
methods:
• Use a custom provisioning file (Prov.xml) to configure the terminal on startup.
Custom provisioning allows you to set up multiple devices with organization-specific settings so they are ready to use.
To learn more about creating custom provisioning XML files, see the Administrator Guide for Windows Embedded 8.1
Handheld, available from Microsoft at https://technet.microsoft.com.
• Use the Quick Start bar code to bypass custom provisioning and go straight to the Windows Start screen.
• Use the Consumer setup wizard that steps you through configuring the terminal and setting up a Microsoft® account
(optional). Once you add a Microsoft account, there is no way to change it without resetting the terminal.
How to Use the Quick Start Bar Code or a Custom Provisional Bar Code
To use a provisioning bar code:
1. Press the Power button .
2. From the Welcome screen, select a language, and then next.
3. Point the terminal at the Quick Start bar code (below) or a custom provisional bar code, and then
press the Scan button. For optimum performance, avoid reflections by scanning the bar code at a slight angle.
On a successful scan, the terminal beeps twice and “configuration received” appears under the Barcode option on
the screen.
4. Touch next. “Configuration in progress” appears on the screen. When the terminal is done booting, the Start
screen appears.
How to Use a Custom Prov.xml file on an SD Card
To use a Prov.xml file saved to an SD Card:
1. Save the Prov.xml file to the root directory of the SD Card.
When using the SD card for provisioning, the file must be named Prov.xml and must be located in the root path.
The provisioning file should also be encoded as UTF-8 or UTF-16LE, including the byte order mark (BOM).
2. Install the card in the terminal.
For information on how to install the SD card, see Installing a Memory Card on page 2-14.
3. Press the Power button .
4. From the Welcome screen, select a language, and then next.
The terminal automatically starts searching for provisioning data sources. When the Prov.xml file is found, “configu-
ration received” appears under the SD Card option.
5. Touch next. “Configuration in progress” appears on the screen. When the terminal is done booting, the Start
screen appears.
How to Use Near Field Communication (NFC) Technology
To use an NFC tag:
1. Press the Power button .
2. From the Welcome screen, select a language, and then next.

1 - 5
3. Touch NFC.
4. Hold the NFC tag close to the back of the terminal. When an NFC tag is recognized, “configuration received”
appears under the NFC option.
5. Touch next. “Configuration in progress” appears on the screen. When the terminal is done booting, the Start
screen appears.
To use an NFC enabled device:
1. Verify Tap to share and Bluetooth is enable on the sending device.
2. Press the Power button on the terminal.
3. From the Welcome screen, select a language, and then next.
4. Touch NFC.
5. On the sending device, locate and select the prov.xml file. The maximum file size allowable is 128 KB.
6. Touch Share.
7. Hold the terminal back to back with the sending device.
When the entire Prov.xml is received, “configuration received” appears under the NFC option.
8. Touch next. “Configuration in progress” appears on the screen. When the terminal is done booting, the Start
screen appears.
Unlocking the Screen
Swipe up from the bottom of the screen to unlock the terminal and access the Start screen.
For information on customizing the security feature, see Managing Security and Customizing the Screen Lock on page 5-2.

1 - 6
Customizing the Start Screen and Accessing Apps
Start is the first screen you see once you power on the terminal and unlock screen. You can add, delete, move, resize, or
group Tiles into folders for easy quick access. Tiles can be apps, contacts, maps, albums, or office files. Live Tiles provide
notifications and updates in real time (e.g., weather stats).
On Start , touch and hold a Tile, and then:
• Drag the Tile to a new location on the screen.
• Touch Unpin to delete the Tile.
•Touchthearrow to toggle through Tile sizes.
On Start , swipe left to access the Apps list. The Apps list contains a complete list of all the apps loaded on the
terminal. You can pin anything on the Apps list on Start.
• Touch and hold an app, and then select pin to start.
• Touch the app icon/name to open the app.
• Touch a letter or Search to find an app quick.
Tiles
Swipe left to view the
Apps list or down to
view more Tiles.
Start Apps List
Notification/Status Bar

1 - 7
Accessing the Action Center from the Status Bar
To view the battery charge level (%), details about a notification or to quickly access and modify settings, touch and hold the
status bar at the top of the screen and then drag down.
• The battery charge level (%) shows in the upper left corner of the screen.
• Touch any notification to open the related app and access additional settings or information.
• Touch ALL SETTINGS to access system and application settings.
• Touch to access the Wi-Fi settings screen where you can view available networks, add a Wi-Fi network, or turn
Wi-Fi networking On or Off.
• Touch to turn the Bluetooth technology on or off.
• Touch AIRPLANE MODE to toggle Airplane Mode on or off.
• Touch ROTATION LOCK to turn on or off automatic screen rotation when you rotate the terminal 90 degrees.
To close the action center, swipe up from the bottom of the screen.
Customizing the Quick Actions
To customize the action center:
1. From the Action Center, select ALL SETTINGS > notifications + actions.
2. Touch the shortcut you want to change.
3. Select a new app from the list.
Action Center All Settings

1 - 8
Changing Notifications
If you want to keep notifications hidden when you access the Action Center from the Lock screen:
1. From the Action Center, select ALL SETTINGS > notifications + actions.
2. Remove the check from the box next to Show notifications in action center when my phone is locked.
The default setting is enabled (checked).
You can also set how and when specific apps show notifications. For more information, see Changing App Specific
Notifications on page 5-3.
Common Status and Notification Icons
Note: To view details about the status of the WLAN (Wi-FI) and Bluetooth radio connections, swipe down from the top of
the screen to expand the Action Center is expanded.
About Cortana Voice Assistant
Cortana is your personal assistant app that makes daily tasks easier and faster by using voice commands, simple
questions, and quick screen input. Here are some of the things Cortana can help you with:
• Send an e-mail or message
• Schedule a meeting
• Set a reminders for an important tasks or events
• Check your location, get directions
• Get up-to-date traffic and weather info
To get started with Cortana you need an active Wi-Fi connection and a Microsoft account.
Press the Search button or the touch the Cortana tile on the Start screen.
This feature is not available in all languages or regions. For information on how to use Cortana or to view information on
availability, go to www.windowsphone.com. If you do not want to use Cortana or it is not available in your country or region,
you can still use the Speech functionality on your the terminal.
Icon Meaning Icon Meaning
Note: Status and notification icons are hardware and software dependent. Some of the icons listed below may not be
relevant for your Dolphin model.
An app or service is using terminal location
information.
Sound is turned off.
Unread notification Vibrate mode is turned on.
Wi-Fi is turned On, there is an active Wi-FI
network connection and the signal strength is
strong.
Battery charge level
Wi-Fi is turned On, there is an active Wi-Fi
network connection but the signal strength is
weak.
Battery saver mode is turned on.
Bluetooth is turned On, the terminal is paired to
another device with Bluetooth technology and the
connection between terminal and paired device is
active.
Terminal is connected to external power. When the
battery is charging the battery charge and external
power icons toggle off and on.
Airplane mode is turned on.