Honeywell Marathon User manual

Marathon
Hand-Held Computer
With Microsoft Windows®7 Professional or
Microsoft Windows®Embedded Standard 2009 or
Microsoft Windows®XP®Professional Operating System
Quick Start Guide
MARATHON-QS Rev A
4/12

Marathon - Front

Marathon - Back
Marathon - Bottom

Marathon - Left
Marathon - Right

Hand Strap Assembly

Shoulder Strap Assembly

Battery Charger - Extended Battery

Marathon Desktop Dock

Vehicle Dock - Front

Vehicle Dock - Mounting
Vehicle Dock - Back

Install SIM Card

Attach Extended Battery

Setting up the Marathon
Please have the following Information available before setting up your Marathon:
lNetwork ID (SSID) of the Access Point
lWEP key or LEAP authentication credentials
1. Install the hand strap and/or shoulder strap.
2. Connect the Marathon power cable.
3. Press the Power button.
4. Accept the Windows Licensing Agreement.
5. Set the date and time.
6. Set power management.
7. Adjust speaker volume.
8. Edit the radio parameters.
9. Restart the Marathon.
Bluetooth and the Marathon
Please refer to the Marathon Reference Guide for information when using the Marathon
with Bluetooth.
WWAN and the Marathon
Please refer to the Marathon Reference Guide for information when using WWAN. Use
of WWAN in the US and Canada requires a hip pad or a 62Whr extended battery.
Removing the hip pad or extended battery will disable the WWAN radio in the USand
Canada.

Setting Up the Radio
If the access point uses an authentication protocol (WEP, LEAP, etc.), your radio must
use the same authentication. Please contact your IT department for WEP keys or LEAP
credentials. Please refer to the Marathon Reference Guide for information on using
WPA.
1. Tap Start > Programs > Summit > SCU OR tap the Summit Client Utility
icon on the desktop.
2. Tap the Admin Login button and enter the password (default = SUMMIT).
3. Tap the Profile tab and make sure the Default profile is selected.
4. Select SSID and enter your SSID value.
5. If the access point is using WEP, select WEP from the Encryption pull down
list.
6. Tap the WEP keys/PSKs button and enter the WEP Key(s) and tap OK. Skip
to step 12.
7. If the access point is using LEAP, select LEAP from the EAP Type pull down
list.
8. Select WEP EAP from the Encryption pull down list.
9. If the Cisco/CCS certified AP is configured for open authentication, set the
Auth Type radio parameter to Open.
10. If the AP is configured for network EAP only, set the Auth Type radio
parameter to LEAP.
11. Tap the Credentials button and enter the User Name and Password.
12. Tap the Commit button to save the radio configuration.
13. Tap the Main tab. Wait for a radio connected message.
14. Tap the Admin Logout button when finished.
15. Restart the Marathon.
Please refer to the Radio Mode parameter in the Marathon Reference Guide. It is
important that this parameter setting corresponds to the Access Point to which the
Marathon connects.

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications
and other information contained in this document without prior notice, and the reader
should in all cases consult HII to determine whether any such changes have been
made. The information in this publication does not represent a commitment on the part
of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor
for incidental or consequential damages resulting from the furnishing, performance, or
use of this material.
This document contains proprietary information that is protected by copyright. All rights
are reserved.
© 2011-2012 Honeywell International Inc. All rights reserved.
Other product names or marks mentioned in this document may be trademarks or
registered trademarks of other companies and are the property of their respective
owners.
Web Address: www.honeywellaidc.com

Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Technical Assistance
Contact information for technical support, product service, and repair can be found at
www.honeywellaidc.com.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your product’s warranty
information.
User Documentation
To download the Marathon user documentation go to www.honeywellaidc.com.