Honeywell 8712009 Original operating instructions

Page 1
Models 8712009, 8712109, 8712309, 8712409
Read this manual carefully before installing and operating!
ENGLISH
Installation & Operation Guide
Digital Deadbolt

Page 2
Index
INSTALLATION INSTRUCTIONS
Package Contents / Tools Required.............................................................Page 1
Prepare Door and Jamb.................................................................................Page 2
Adjusting Deadbolt Latch Set.......................................................................Page 3
Installing Deadbolt Latch Set........................................................................Page 4
Preparing Interior Assembly.........................................................................Page 5
Installing Exterior Assembly..........................................................................Page 6
Installing Interior Assembly...........................................................................Page 7-8
OPERATION INSTRUCTIONS
Exterior Assembly Overview.........................................................................Page 9
Locking and Unlocking / Changing Programming Code /
Adding User Codes........................................................................................Page 10
Deleting User Codes / Automatic Lock Function /
Temporarily Disable Auto Lock...............................................,,,,,,,,,,,,,.........Page 11
Vacation Mode / Secure Lock-out Period / Sound ON and Off
Restore Factory Settings / Low Battery Warning.......................................Page 12
Consumer Friendly Message Guide / Programming Record...................Page 13
Installation Trouble Shooting........................................................................Page 14
Template.........................................................................................................Page 15-16
Consumer Assistance...................................................................................Page 17
Limited Warranty...................................................................................Back Cover

Page 1
INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS
TOOLS REQUIRED
Tools Required for Installation
on Pre-drilled Doors:
•PhillipsScrewdriver
Tools Required for Installation
on Doors That Require Drilling:
•Drill
•TapeMeasure
•Pencil
•2-1/8”(54mm)DrillHoleSaw
•1”(25mm)Drill
•1/16”(2mm)Drill
•Chisel
•Hammer
•PhillipsScrewdriver
DO NOT RETURN TO STORE! If any parts are missing or damaged,
pleasecallCustomerServicetollfreeat1-877-354-5457(M-F7am–5pmPST)
Deadbolt Strike Plate
DeadboltLatchSet(Adjustable)
2-3/8”(60mm)to2-3/4”(70mm)
Interior Assembly Mounting Plate
Exterior Assembly
Entrykeys(2ea.)
5/16”(8mm)Screws-2ea. 7/8”(22mm)Screws-2ea.
3/4”(19mm)Screws-5ea. 1”(25mm)Screw-1ea.

Page 2
NOTE: For installation on doors with pre-drilled holes skip to page 4.
1. TEMPLATE
 a.Cutouttemplateprintedonpage15ofthisManual
 (Figure1a).
b. Foldtemplateandplaceondoor36”(915mm)from
  thegroundasmarked(Figure1b).
2. MARK THE DOOR FOR DRILLING
b. Mark center hole on door edge through guide on
 templatefor1”(25mm)latchbolt(Figure2a).
a. Mark center hole on door face through guide on
  templatefor2-3/8”(60mm)or2-3/4”(70mm)
  backset(Figure2b).
3. DRILL AND CHISEL DOOR
 a.Drill2-1/8”(54mm)holethroughdoorfaceasmarked
  forlockset(Figure3a).
 b.Drill1”(25mm)holeincenterofdooredgefor
  DeadboltLatchAssembly(Figure3b).
c. Insert Deadbolt Latch Assembly in hole keeping it
  paralleltofaceofdoor.Markoutlineandremovelatch
  (Figure3c).
 d.Chisel1/8”(3mm)deeporuntillatchfaceisush
  withdooredge(Figure3d).
4. MARK AND DRILL DOOR JAMB
a. MarkcenterholeonedgeofjambevenwiththecenteroftheLatchBoltondoor
 edge.(Figure4a).
 b.Drill1”(25mm)hole1-3/16”(30mm)deepindoorjamboncentermark 
 (Figure4b).
 c.OutlineoutsideedgesofStrikePlate(Figure4c).
 d.Chisel1/8”(3mm)deepforStrikePlateoruntilush(Figure4d).
 e.InstallStrikePlateusingtwo3/4”(19mm)screwsprovided(Figure4e).
PREPAREDOORANDJAMB
Figure4a Figure4b Figure4c Figure4e
Figure4d
NOTE: For Drive in Latch, drill hole size indicated on template and press
until it is flush with door edge.
UP
Figure1a
Figure2a Figure2b
Figure3a
Figure3c
Figure1b
Figure3b
Figure3d

Page 3
ADJUSTABLEDEADBOLTLATCHSET
NOTE: Deadbolt Latch Set is shipped with the backset set at 2-3/8” (60mm)
Measurethebackset(backsetisdistancebetweenedgeofthedoorandthe
centerofLock).
1. TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET
 a.Holdlatchwithnumbersfacingforwardandthumbpressingonthebolt(Figure1a).
 b.Rotatethecylindercoverclockwise(Figure1b).
 c.Pullandtwisttheextensionplateallthewayout(Figure1c).
 d.Rotatethecylindercovercounterclockwisesothatthemarkingalignswith
  the2-3/4”(70mm)positionindicator(Figure1d).
2. TO CONVERT FROM 2-3/4” (70mm) BACKSET TO 2-3/8” (60mm) BACKSET
a.Holdlatchwithnumbersfacingforwardandthumbpressingonthebolt(Figure2a).
 b.Rotatethecylindercoverclockwise(Figure2b).
 c.Pushandtwisttheextensionplateallthewayin(Figure2c).
 d.Rotatethecylindercovercounterclockwisesothatthemarkingalignswith
  the2-3/8”(60mm)positionindicator(Figure2d).
Figure1a
Figure2a
Figure1b
Figure2b
Figure1c
Figure2c
Figure1d
Figure2d
Extension plate
Extension plate
Cylindricalcover
Cylindricalcover
Yourlatchisnowset
2-3/8”(60mm)backset
Yourlatchisnowset
2-3/4”(70mm)backset
2-3/8”
(60mm)
2-3/8”
(60mm)
2-3/4”
(70mm)
2-3/4”
(70mm)
2-3/8”
(60mm)
NOTE: Do not extend Cylindrical Cover past 2-3/4” (70mm)

Page 4
3. INSTALLING THE DEADBOLT LATCH SET (need phillips head screwdriver)
 a.InsertDeadboltLatchSetintodooredgeholewiththeword
 “UP”andthearrowontheextensionplatefacingUP.Cross
 shapedspindleconnectorwillbeatthebottomoftheDeadbolt
 LatchSet(Figure3a).
 b.Makesurethefaceplatesitsushwiththedoor.Donotforce
 thelatchintothemortiseush.Chiseloutexcessmaterialif
  necessaryforausht.
 c.Usingtwo3/4”(19mm).screwsprovided,screwthelatchintothe
  doorwithahandheldscrewdriver.DONOTOVERTIGHTEN.
4. IDENTIFYING YOUR DOOR HANDING
Stand outside the door.
 a.IfthehingesareontheleftyourdoorisLeftHanded(Figure4a).
 b.IfthehingesareontherightyourdoorisRightHanded(Figure4b).
NOTE: Deadbolt Latch must be retracted when installing
NOTE: You are standing outside the door
INSTALLINGDEADBOLTLATCHSET
OUT SWING DOOR IN SWING DOOR
Figure4a
Left Handed Door
Hinges are on the left side
Left Handed Door
Hinges are on the left side
Right Handed Door
Hinges are on the right side
Right Handed Door
Hinges are on the right side
Figure4b
Figure3a
Deadbolt Latch Extended
Deadbolt Latch Retracted

Page5
NOTE: Deadbolt Latch must be retracted when installing
NOTE: You are standing outside the door
PREPARINGTHEINTERIORASSEMBLY
6. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR
 a.Gentlymovetheswitchto“L”forLeftHandedDoor(Figure6a).
 b.GentlymovetheSwitchto“R”forRightHandedDoor(Figure6b).
7. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS
 a.TheInteriorKnobgoesintheHorizontalpositionforLeftHandedDoors(Figure7a).
 b.TheInteriorKnobgoesintheVerticalpositionforRightHandedDoors(Figure7b).
NOTE: Make sure deadbolt Latch is retracted
Right Handed Door
(Vertical)
Entry Switch
(Left or Right)
Left Handed Door
(Horizontal)
5. UNPACK THE INTERIOR ASSEMBLY
 a.Removethebatterycoverbyslidingthecoverupward.
 b.LocatethescrewsholdingtheMountingPlatetotheInteriorAssembly.Removethe
 screwstoreleasetheMountingPlatefromtheInteriorAssembly.
Figure6a-b
Figure7a-b

Page6
9. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR
 a.Fromthesidemarked“Thissideagainst
  door”,routetheControlWirethroughthe
rectangular slot in the Mounting Plate
  (Figure9a).
 b.PlaceMountingPlateagainstdoorwithtailpiecepassing
  throughthecenterholeinthethreeholeset(Figure9b).
c. Secure the Mounting Plate to the Exterior Assembly using
  two7/8”(22mm)Screws(Figure9c).
 d.HandtightenwithaPhillipsScrewdriverleavinglooselyconnected(Figure9d).
e. Check that the Rubber Gasket is properly aligned and correct as necessary
 (Figure9e).
 f.Checkverticalalignmentofthelock(Figure9f).
 g.TightensecurelywithahandheldPhillipsScrewdriver.DO NOT OVER TIGHTEN
10. OPTIONAL INSTALLATION
 a.Usinga1/16”(2mm)drillbit,drillapilotholeinyourdoorusingthe
 MountingPlateupperholeasaguide(Figure10a).
b. Insert one 3/4”(19mm)screwandtighten.
8. INSTALLING THE EXTERIOR ASSEMBLY
 WorkwiththeDoorOpenforeasyaccess.
a. Unpack the Exterior Assembly. Use care to not scratch the green circuit board
during handling and installation.
b. Check that the Rubber Gasket is properly seated on the Exterior Assembly
 (Figure8a-b).
 c.InserttheExteriorAssemblyontothedoorwiththetailpiecegoingthroughthe
Deadbolt Latch Set cross shaped spindle connector in the VERTICAL POSITION.
 RoutetheControlWirethroughthedoorovertheDeadboltLatchSet(Figure8c).
NOTE: Tailpiece must be
positioned vertically
INSTALLINGEXTERIORASSEMBLY
Right handed door view
Rubber
Gasket
Control
Wire
Tailpiece
(Vertical)
Latch
Hole
Mounting Plate
3/4”(19mm)screw
(OptionalInstallation)
7/8”(22mm)screws
Control Wire
Figure8a-b Figure8c
Figure10a
Figure9a-f
NOTE: Lock and unlock using the key to see if
the Deadbolt Latch is opening and closing easily.

Page 7
INSTALLINGINTERIORASSEMBLY
11. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY
a. Use care to attach the Control Wire male plug to the Interior Assembly female
  socketconnector(Figure11a).
b. Do not force the Control Wire male plug into the Interior Assembly female
  socketconnector(Figure11b).
 c.TheControlWiremaleplughastwoalignmenttabsonthesmoothsideofthe
  plugwhichisthetopoftheplug(Figure11c).
 d.TheControlWiremaleplugisinsertedwiththesmoothsideupintotheInterior
 Assemblyfemalesocketconnector(Figure11d).
12. ATTACH THE INTERIOR ASSEMBLY TO DOOR
 a.PositiontheInteriorAssemblyoverthetailpieceandpushtheInteriorAssembly
 againstthedoor(Figure12a).
 b.Usingtwo5/16”(8mm)screws and one 1”(25mm)screw, attach
the Interior Assembly to the Mounting Plate. DO NOT OVER TIGHTEN SCREWS
(Figure12b).
5/16”(8mm)screws
1”(25mm)screw
NOTE: Lock and unlock using Interior Knob to see if the
latch is opening and closing easily.
Figure12a-b
Figure11a-d

Page 8
13. Installing Batteries
 a.Insert4AAhighqualityAlkalinebatteriesintotheBatteryCompartmentinthe
 directionnoted+/-ontheCompartment.TheLockwillbeep2times,thekeypad
 willilluminateblue,andtheHoneywellbuttonwillashgreentwicetosignifythat
 ithasreceivedpower(Figure13a).
 b.SlidetheBatteryCoverdownintothetrackontheInteriorAssemblytocover
thebatteries(Figure13b).
14. Testing Lock
With the Door Open
 a.TesttheLockusingtheInteriorKnob.Theboltshouldmovesmoothly.
 b.TestthelockusingtheKeypad.Tolockpressandthenpress“1234”
to unlock.
INSTALLINGINTERIORASSEMBLY(CONT.)
Override
Access Key
Exterior Assembly Interior Assembly
Interior
Knob
Battery
Cover
Light Indicator
Keypad
NOTE: Do not touch the Keypad until the blue light turns off.
Do not use rechargeable batteries or non-alkaline batteries.
Figure13a-b
INSTALLATION OVERVIEW
Strike Plate
BatteryCover
Interior Assembly
Key
Exterior Assembly
Rubber Gasket
Mounting Plate
Latch
5/16”(8mm)screws
Optional
3/4”(19mm)
screw
3/4”(19mm)
screws
7/8”(22mm)screws
1”(25mm)Screw

Page 9
OPERATION INSTRUCTIONS
EXTERIORASSEMBLYOVERVIEW
Indicator light
Green
•IndicatesSuccessfulProgrammingStep
•IndicatesUnlockingisSuccessful
Red
•IndicatesFailedProgrammingStep
•IndicatesLockingisSuccessful
Electronic lock requires (4) High Quality
AA Alkaline batteries. When all 4 batteries
are installed in the correct position, hear 2
beeps and the keypad will illuminate blue.
DO NOT TOUCH the keypad until the keypad
stops illuminating.
Lock-Usedtolockdoor
Clear -Usedtoclearwrongkeypadentries
Unlock-Usedtounlockdoor
Programming -Usedinprogrammingsteps
5 Seconds -Completealltheprogrammingstepsintheprogrammingmodewithin5seconds.
Clear -Usethekeytoclearentriesincaseawrongbuttonispushed.
Lock button
Unlock button
FactorySettings
The lock comes factory preset with a:
Please change the Programming
Code and the User Code
as soon as possible after installation
to insure security.
Programming code - 123456
User code - 1234
User ID - 01
ID
PC
PC
UC
UC
Batteries(notincluded)
Programming Symbols
Lock/Clear
Unlock/Programming
Programming Code
User Code (4-8 digits)
User ID (01-50, 2 digits)
ID
PC
UC
Programming Tips

Page 10
TO UNLOCK THE LOCK
UsingKeypad:EnteravalidUserCode(defaultcodeis1234)andpressandhear
1 beep and lights green.
TO LOCK THE LOCK
Using Keypad: Press and then hear 2 beeps and lights red.
CHANGE CURRENT OR PRESET PROGRAMING CODE
FactorydefaultProgrammingCode=123456,thisisthemasterpasswordfor
yourlock.Allprogrammingfunctionsrequirethiscode.Followthebelowsequenceto
changetheProgrammingCodetoyourcustom6digitcombination.
TOADDANEWUSERCODE(youcanaddupto50newusercodes)
TheUserCodemustbea4-8digitcombination.EachUserCodeisthenlinked
toaUserID(whichisanynumberbetween01-50)toidentifyanindividualUser
Code.(UserID1-9shouldbeenteredas01-09sotheyare2digits).
Hear 1 beep and Light Indicator illuminates green.
RecordNewandChangedCodesonProgrammingRecordlocatedonPage17.
Hear 1 beep and Light Indicator illuminates green.
NOTE:WhenaNEWUSERCODEisset,thedefaultfactorycode(1234)isdeleted
for safety.
RecordNewandChangedCodesonProgrammingRecordlocatedonPage17.
123456   08 56785678
Forexample:toaddtheUserID-08toUserCode-5678,enterthefollowing:
4newRe-enter
1Re-enter
LOCKING AND UNLOCKING
CHANGING PROGRAMMING CODE
ADDING USER CODES
ID
ID
ID
UC UC
UC UC
UC
PC
PC
PC PC
PC
PC
PC

Page 11
DELETE ONE EXISTING OR PRESET USER CODE
TheunitcomeswithafactoryUserID=01forUserCode=1234.
IMPORTANT:Todelete1UserCode,thelockmusthavemorethan1UserCode
in its database.
SET OR CANCEL AUTO LOCK
You can set the lock to automatically close after each time the lock is opened. Time
valuerange=20-900seconds,enterthefollowing:
DELETE ALL USER CODES
IMPORTANT:thiswilldeletetheusercodesbutnottheprogrammingcode,enter
thefollowing.
Hear 1 beep and Light Indicator illuminates green.
Set Auto Lock:
Hear 1 beep and Light Indicator illuminates green.
To cancel Auto Lock set the time to 00, enter the following:
CancelTimeValueAutoLock:
Hear 1 beep and Light Indicator illuminates green.
Hear 1 beep and Light Indicator illuminates green.
2Existing re-enter
5TimeValue
500
3re-enter
DELETING USER CODES
AUTOMATICLOCKFUNCTION
PC
PC
PC
PC PC
ID UC
UC
UC
ID ID
DISABLE:
WhileinAuto-Lockmode,unlockdoorusing,within10secondsyoumustturnthe
lockingknobbyhandtothelockedposition,waitmorethan2secondsthenturnthe
lockingknobbacktotheunlockposition.TheAuto-Lockmodeisnowdisabled.
RESTORE:
TorestoretheAuto-Lockfuntion,youcanturnthelockingknobbyhandtothelocked
position,waitmorethan2secondsorpressthe Lock button on the keypad.
TEMPORARILYDISABLEAUTO-LOCK
PC

Page 12
To reset the lock to the original factory settings including the Programming Code
andallUserCodesremoveonebatteryfor10seconds.Reinsertthebatteryand
waitforalongandshortbeep.Press3timeswithin3seconds.Thelockwillbeep
andthelightindicatorwillturngreen.
BeepsandLEDashesredfor5seconds.Replacewithgoodqualityalkalinebatteries.
Note: RemovingbatteriesdoesnoteraseactiveProgrammingorUserCodes.
RESTOREFACTORYSETTINGS
LOWBATTERYWARNING
UC
PC
NOTE: If you only press the for more than 3 seconds but
do not input PC , the system will remain in Vacation Mode.
WithVacationModeenabled,thesystementersintolow-powercomsumptionmode.
Duringthismode,allbuttonsandfunctionsincludingtheremotecontrollwillbeinvalid
untiltheyarere-enabled(seestepsbelow).
ENABLE:
DISABLE:
TodisabletheVacationMode,youmustpressandholdformorethan3seconds,
theninputtounlockthedoor.VacationModeisnowdisabled.
VACATIONMODE
Hear 1 beep and Light Indicator illuminates green then lock door
10 1
PC
PC
Youcan“mute”orturnthe“soundon”onyourlockbyenteringthefollowing.
(Factorysettingissoundon).
SoundOff(1)-LightIndicatorilluminatesgreen.
SoundOn(2)-Hear1beepandLightIndicatorilluminatesgreen.
61or2
SOUNDONANDOFF
PC
1=SoundOff
2=SoundOn
WarningsoundsandLEDashesredafter4incorrectcodeattempts:Keypadshuts
downfor30seconds.
SECURELOCK-OUTPERIOD

Page 13
NOTE: If you only press the for more than 3 seconds but
do not input
PC
, the system will remain in Vacation Mode.
NOTE:Whenbatteryisunderlowvoltage,thelockwillgivethe(LowBatteryWarning:Beepsand
LEDashesredfor5seconds).Duringthistimeyourlockcanstillwork.Howeveroncethevoltage
islowerthan4.3V(calledSuper-LowVoltage),theoperationofthelockingandunlockingwillnot
work,usermustreplacebatteriesimmediately.
CONSUMERFRIENDLYMESSAGEGUIDE
Unlock/Validprogramming: 1 long beep and LED illuminates green
Lock: 2 short beeps and LED illuminates red
InvalidProgramming: 2shortbeepsandLEDashesredtwice
LowVoltage: Beepsfor5seconds
(7/9timesdependsonoperationisunlock/lock)
SuperLowVoltage: 4shortbeepsandLEDashesredfourtimes
4 Incorrect code entry attempts: 2 short beeps and LED illuminates red each attempt
Poweron: 1 long beep and 1 short beep and LED illuminates green
Chip Reset: 1 long beep and 1 short beep and LED illuminates green
(mayoccurseveraltimesoronceinawhile)
Lock Error: 3longbeepsLEDashesredthreetimes
Repeat operation after Lock Error: 2shortbeepsthreetimesLEDashesredsixtimes
My Codes: Date Created
ProgrammingCode    (6digits)//
UserCode01     (4-8digits)//
UserCode02 (4-8digits)//
UserCode03 (4-8digits)//
UserCode04 (4-8digits)//
UserCode05 (4-8digits)//
UserCode06 (4-8digits)//
UserCode07 (4-8digits)//
UserCode08 (4-8digits)//
UserCode09 (4-8digits)//
UserCode10 (4-8digits)//
PROGRAMMING RECORD

Page 14
INSTALLATIONTROUBLESHOOTING
Issue Solution
Latch Working
Backwards-
Lockunlockswhen
lock button is pushed
orlockswhenunlock
button or code is
pushed.
Directionswitchissettoincorrectsetting.
RemovetheInteriorAssemblyandmovetheswitchtotheopposite
direction.
•CheckthatyourswitchissetinthecorrectpositionLeftorRight
Handed door.
If Correct
•RotateInteriorKnobandreinstallInterior
Assembly.RetestagainwhileholdingInteriorAssemblyinplace.
InteriorKnobwillnot
turn.
Knoborverticaltailpieceisinstalledin
incorrectposition.RemoveInteriorAssemblyandrepositiontheInte-
riorKnob.WiththeDeadboltLatchretractedverifythatthetailpiece
isvertical.
Lockwillnotfunction
electronically.
•Checkthatallbatteriesarefreshhighquality
AlkalineBatteries.
•Checkforproperpolarity(+-)ofallbatteries.
•CheckthattheControlWireisattachedtotheInteriorAssembly.
Lockgiveserror
signalwhenopeningor
locking and Deadbolt
Latchwillnotextend
or retract completely
whendoorisclosed.
Unlock door using Key or Interior Knob. While door is open, check
that the Deadbolt Latch
operates smoothly. Check for proper alignment of the strike plate,
adjustasneededtoassurethereisnobindingagainsttheDeadbolt
Latch.
Deadbolt Latch is
sticking.
Installationscrewsofthelockmaybetootightandhavetobe
loosened.
•RemoveInteriorAssembly.
•SlightlyloosentheMountingPlatescrews.
•LockandunlockusingtheKey.
•ReattachControlWireandInteriorAssembly.

Page15
2-3/8” (60mm) BACKSET 2-3/4” (70mm) BACKSET
THEN DRILL 1” (25mm) HOLE IN CENTER DOOR OF EDGE 2” (50mm) IN DEPTH
MARK FOR 1-3/4” (45mm) DOOR
DRILL
2-1/8” (54mm)
HOLE
MARK FOR 1-3/8” (35mm) DOOR
IMPORTANT! PLACE TEMPLATE ON HIGH EDGE OF DOOR BEVEL PLACE TOP
36”(915mm) ABOVEFLOOR

Page16
BACK OF
TEMPLATE

Page 17
CONSUMER ASSISTANCE
EMAIL:[email protected]
WEBSITE:www.honeywellsafes.com
ADDRESS: Consumer Assistance Dept.
LHLicensedProducts,Inc.,860EastSandhillAvenueCarson,CA90746USA
TELEPHONE:US/Canada1-877-354-5457(TollFree)
Mexico01-800-288-2872AfterEnglishvoicerecordingstopsyoumustthenenter800-
860-1677tocompleteyourcall.(TollFree)
Australia0011-800-5325-7000(TollFree)
Germany/NewZealand00-800-5325-7000(TollFree)
OtherCountriesXX*-310-323-5722(TollChargesApply)
XX*-DialU.S.CountryCoderst
CALLCENTERHOURS:US/Canada7am–5pm(Pacic**)Mon–Fri
(Subjecttochange)
CALLBACKHOURS:OtherCountries7am–8pm(Pacic**)Mon–Fri
(Subjecttochange)
Pacic**-LocaltimeinLosAngeles,CA,USA
* Insert correct Country Code
** Local Time based on Los Angeles California USA
INTERNATIONALCALLBACKHOURS:
IfyouneedtospeakwithaconsumerassistantandcannotcontactusduringtheCall
Centerhoursabove,pleasesendanemailorleaveatelephonemessage,includingyour
Name,TelephoneNumberandthebesttimeforustocontactyouduringtheCallBack
hoursaboveandwewillmakeoureveryefforttocontactyouandhelpansweranyof
your questions or concerns.

Page 18
TheHoneywellTrademarkisusedunderlicensefromHoneywellInternationalInc.Honeywell
InternationalInc.makesnorepresentationsorwarrantieswithrespecttothisproduct.
MEEDBKP-RE20160620www.honeywellsafes.com
Manufactured by:
LH Licensed Products, Inc.
860EastSandhillAvenue
Carson,CA90746
Limited Lifetime Mechanical and Finish Warranty / 1 Year Limited Electronics Warranty
Thisproductcomeswithalimitedlifetimemechanicalandnishwarrantyandaoneyearlimited
electronicswarrantytotheoriginalresidentialconsumeragainstdefectsinmaterialand
workmanshipundernormaluseaslongastheoriginalresidentialpurchaseroccupiesthe
residentialpremisesuponwhichtheproductwasoriginallyinstalled.
ORIGINAL RESIDENTIAL CONSUMER
Thiswarrantyisnottransferable,andappliestotheoriginalpurchaseronly,aslongastheoriginal
purchaseroccupiestheresidentialpremisesuponwhichtheproduct(s)wasoriginallyinstalled.
Proofofpurchase(originalsalesreceipt)andownershipmustaccompanyallwarrantyclaims.
Allnon-homeownerpurchasers(includingpurchasersforindustrial,commercialandbusinessuse)
arenotcoveredunderthetermsofthiswarranty.
WHATISNOTCOVERED
Thiswarrantyisnullandvoidiftheproductwasusedforpurposesforwhichitwasnotdesigned.
ThiswarrantyDOESNOTCOVERnormalwearandtearofpartsordamageresultingfromanyof
thefollowing:negligentuse,misuseorabuseoftheproduct,orusecontrarytoorinviolationof
writteninstructionsprovidedbyLHLicensedProducts,Inc.Further,thiswarrantydoesnotcover
ActsofGod,suchasre,ood,hurricanesandtornadoes.ThiswarrantyDOESNOTCOVER
scratches,abrasions,deteriorationduetotheuseofpaints,solventsoruseofcleaners
containingabrasives,alcoholorothersolvents,whetherperformedbyacontractor,service
company,oryourself.ThiswarrantyDOESNOTCOVERproduct(s)usedincommercial
applications, used in common area applications, disassembly, repair or alteration by anyone other
than LH Licensed Products, Inc., improper installation or exposure to extremes of heat or humidity.
ThiswarrantyDOESNOTCOVERanylosses,injuriestopersonsorlossofproperty,general
damagesorcosts,andshippingandfreightexpensesrequiredtoreturnproduct(s)to
LH Licensed Products, Inc. LH Licensed Products, Inc. shall not be liable for any indirect,
incidental or consequential damages of any nature relating to this lock. LH Licensed Products, Inc.
isalsonotresponsibleforcostsassociatedwithremovingorreinstallingtheproduct.
ADDITIONAL TERMS
LH Licensed Products, Inc. does not authorize any person to create for it any obligation or
liabilityinconnectionwiththeProduct.LHLicensedProducts,Inc.’smaximumliabilityhere
under is limited to the original purchase price of the Product. No action arising out of any claimed
breachofthiswarrantybyLHLicensedProducts,Inc.maybebroughtbytheoriginalresidential
purchasermorethanone(1)yearafterthecauseofactionhasarisen.