Hooker Furniture 1652-75003-WH1 User manual

1/2
ASSEMBLY INSTRUCTION
Item#: 1652-75003-WH1 Double Pedestal Dining Table Base
1652-75004-MWD Double Pedestal Dining Table Top
** Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more people.
Assembly Steps:
Diagram 1
Diagram 2

2/2
1. Attach the mounting bridge (E) to base (F) in 45 degree angle by using bolts (A), lock washers
(B) and flat washers (C). Tighten all bolts (A) by turning with allen wrench (D) in a clockwise
direction. (See Diagram 1)
2. Attach table top (G) to table base (F) by using bolts (A), lock washers (B) and flat washers (C).
Tighten all bolts (A) by turning with allen wrench (D) in a clockwise direction. (See Diagram 2)
Assembly instruction for table leaf:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 3.
2. Pull out table top as the arrow direction shown in Diagram 4.
3. Place table leaves between and push table tops together.
4. Turn on latches. (See Diagram 3)
5. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 3 Diagram 4