Hoover HESD4 WIFI User manual
MODEL : WIFI
UK
ENGLISH
ITALIAN
SPANISH
POLISH
HUNGARY
PORTUGUESE
SLOVENIAN
Instruction Manual For Induction Hob
Manuale di istruzioni per piano cottura a induzione
Manual de instrucciones para encimera de inducción
Instrukcja uĪytkowania indukcyjnej páyty grzejnej
Manual de Instruções da placa de indução þNavodila za uporabo indukcijskih kuhalnih ploš
GREECE
İndüksiyonlu Ocak için Kullanım Kılavuzu TÜRKÇE
УКРІнструкція на індукційну варильну поверхню
MANUAL DE UTILIZARE PENTRU PLITE CU INDUCIE
ROMANIAN
Indukciós tűzhelylap Felhasználó i kézikönyv
ιίιο Οι αι ία ΑΑ
HOOVER • Via Privata Eden Fumagalli • 20861 Brugherio (MB) Italy.
HESD4
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
Children under 8 Year of age must be kept away from the
appliance unless they are continuously supervised.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a
safe way and understand the hazards involved.
Children must not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
WARNING: Danger of fire: do not store items on the cooking
surfaces.
WARNING: If the surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
Do not use a steam cleaner for cleaning operations
() #
EN-1
Metallic objects such as knives, forks, spoons and sauce pan
lids must not be placed on the hob surface as they can get hot.
Any spillage should be removed from the lid before opening.
The hob surface must be allowed to cool down before closing
the lid.
After use, switch off the hob element by its control. Do not
rely on the pan detector.
This appliance is not intended to be operated by means of an
external timer or separate remote - control system.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
The instructions state the type of cord to be used, taking into
account the temperature of the rear surface of the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cutout, this appliance must not be
supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on and off
by the utility.
EN-2
$
%
$ # #
&
$ # &
' #$ # ( $ " $
&
!
" # " $&
this
THIS INFORMATION IS IN ANOTHER INDUCITON HOB AND IS A BETTER
EXPLAINATION
INDUCTION
An electronic generator powers a coil located inside the appliance. This coil creates a magnetic
field, so that when the pan is placed on the hob, it is permeated by the induction currents.
These currents make the pan into a real heat transmitter, while the glass ceramic hob remains
cold.
This system is designed for use with magnetic-bottomed pans.
pan
EN-3
#
!& ) # (
* ! $
&
) # ,-
.&& /
" # .&& /
) #
& 01
## $
$
& * $
!&
2
) # *
!
$
#
&
#* #
"
(
#$
ENGLISH
* !
$
349
43
3343
,
8
39 3
* $ $
# #
## $ &
Selection of installation equipment
Cut out the work surface according to the sizes
shown in the drawing.
For the purpose of installation and use, a
minimum of
around the hole.
Be sure the thickness of the work surface is at
least 30mm. Please select heat-resistant work
surface material to avoid larger deformation
caused by the heat radiation from the hotplate. As
shown below:
L(m
m)
W(m
m)
H(m
m)
D(m
m)
A(m
m)
B(m
m)
X(m
m)
590 520 60 56 560+
4
+1
490+
4
+1
50
mini
Induction hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the
Induction hob is in good state. As
shown below
Note: The safety distance between the
hotplate and the cupboard above the
hotplate should be at least 760mm.
A(mm) B(mm) C(mm) D E
760 50
mini
20
mini
Air
intake
Air exit
min.5mm
specifically
our
50mm space needs to be left
placed on the hob, a buzzer will sound for
approximately one minute, after which the hob
will automatically go to standby.
Make sure the
working
that the hob is still hot.
hob.
the zone stops heating and a buzzer will
sound for one minute then the hob will switch
itself off.
EN-4
Before you install the hob, make sure that
• the work surface is square and level, and no
structural members interfere with space
requirements
• the work surface is made of a heat-resistant
material
• if the hob is installed above an oven, the oven
has a built-in cooling fan
• the installation will comply with all clearance
requirements and applicable standards and
regulations
• a suitable isolating switch providing full
disconnection from the mains power supply is
incorporated in the permanent wiring, mounted
and positioned to comply with the local wiring
rules and regulations.
The isolating switch must be of an approved
type and provide a 3 mm air gap contact
separation in all poles (or in all active [phase]
conductors if the local wiring rules allow for this
variation of the requirements)
• the isolating switch will be easily accessible to
the customer with the hob installed
• you consult local building authorities and
by-laws if in doubt regarding installation
• you use heat-resistant and easy-to-clean
finishes (such as ceramic tiles) for the wall
surfaces surrounding the hob.
When you have installed the hob, make sure
that
• the power supply cable is not accessible
through cupboard doors or drawers
• there is adequate flow of fresh air from outside
the cabinetry to the base of the hob
• if the hob is installed above a drawer or
cupboard space, a thermal protection barrier is
installed below the base of the hob
• the isolating switch is easily accessible by the
customer
Before locating the fixing brackets
The unit should be placed on a stable, smooth
surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screwing 4
brackets on the bottom of hob(see picture) after
installation.
Cautions
1. The induction h
qualified personnel or technicians. Please
never conduct the poeration by yourself.
2. The hob must not be installed directly above a
dishwasher, fridge, freezer, washing machine
or tumble dryer, as the humidity may damage
the hobs electronics
3. The induction hob should be installed in such
ion can be ensured
4. The wall and induced heating zone above the
table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and
adhesive must be resistant to heat.
Connecting the hob to the mains power
supply
This hob must be connected to the mains
power supply only by a suitably qualified
person.
Before connecting the hob to the mains
power supply, check that:
1. The domestic wiring system is suitable
for the power drawn by the hob.
2. The voltage corresponds to the value
given in the rating plate
3. The power supply cable sections can
withstand the load specified on the rating plate.
The power supply cable must not touch
any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any
point.
Check with an electrician whether the
domestic wiring system is suitable without
alterations. Any alterations must only be made
by a domestic qualified electrician.
The power supply should be connected in
compliance with the relevant standard, or a
single-pole circuit breaker. the method of
connection is shown below.
50/60Hz
50/60Hz
ob must be installed by
a way that better heat radiat
to enhance its reliability.
Adapters,reducers or branching devices
must not be used to connect the hob to the mains
power supply, as they can cause overheating and
fires.
EN-5
ENGLISH
#
#
#
/
1. Power regular control
2. Timer regular control
3. WIFI control
6. Lock/Inlock control
7. On/Off control
5. Keep warm control
4. Booster control
3
• If the cable is damaged or to be replaced, the
operation must be carried out by the after-sale
agent with dedicated tools to avoid any
accidents.
• If the appliance is being connected directly to
the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm
between contacts.
• The installer must ensure that the correct
electrical connection has been made and that it
is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and
replaced by authorised technicians only.
) # !!
Operating instructions
- -
Boost function
Warning:
2. The boost function works on the all cooking zone.
Cancelling the "BOOST" mode
1.Press the " " control, all the indicators show "--".
Press the“ " control, the power level indicator showing " "
& $ & #
!&
Select the power level by pressing the "+" or "-" control for the
relevant cooking zone. To begin with the indicator shows" "or " "
by pressing the "+" or "-" control. Adjust up or down by pressing
the "+" or "-" control.
If you press the "+" and "-" controls simultaneously, the power
setting returns to" "and the cooking zone switches off.
NB : When the " " control is pressed, the induction hob returns
to standby mode if no other operation is carried out
within one minute.
1. The boost function only operates for 5 minutes, after which
the cooking zone will revert to its original setting.
Cancel the "Boost" mode by pressing the "+" or "-" control of the
corresponding zone.
3. As the boost function of 1st or 3rd cooking zone is activated,
the PRO zone is limited at level 2 automatically.
Vice versa if the boost function of PRO cooking zone is
activated, both the 1st and 3rd cooking zone are limited at
level 2 automatically.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case,
the timer will not turn any cooking zone off when
the set time is up.
off
EN-6
67
4 5
1
2
13
3
• You can set it to turn cooking zones off after the
set time is up.
• You can set the timer for up to 9 hour and 59 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even
if you’re not selecting any cooking zone.
2. Set the time by touching the “ - ” or “ + ” control
of the timer
Hint: Touch the “ - ” or “ + ” control of the timer
once to decrease or increase by 1 minute.
Hold the “ - ” r “ + ” control of the timer to
decrease or increase by 10 minutes.
3. Touching the “ - ” and “ + ” together, the timer
is cancelled, and the”0:00” will show in the minute
display.
4. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
5. Buzzer will beep for 30 seconds and the timer
indicator shows “- - “ when the setting time
finished.
Setting the timer to turn cooking
zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
.
.
.
.
2. Touch “ - ”or “ + ” control , The minder indicator
will start flashing and “0:10” will show in the
timer display.
3. Set the time by touching the“ - ”or “ + ” control of the
timer
Hint: Touch the “ - ” or “ + ” control of the timer
once will decrease or increase by 1 minute.
Touch and hold the “ - ” or “ + ” control of the timer
will decrease or increase by 10 minutes.
4. Touching the “ - ” and “ + ” together, the timer is
cancelled, and the” 00” will show in the minute display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6. When cooking time expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if
they are turned on previously.
:
.
.
.
.
EN-7
ENGLISH
3
If the timer is set on more than one zone:
1. When you set the time for several cooking zones
simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows
the min. timer. The dot of the corresponding
zone flashes.
(setto15minutes)
(setto45minutes)
2. Once the countdown timer expires, the
corresponding zone will switch off. Then
it will show the new min. timer and the dot
of corresponding zone will flash.
UsingtheKeepWarmfunction
Actived the Keep warm function
1. Touching the heating zone selection control
2. Touching the keep warm control ,the zone
indicator show “ “
Cancel the keep warm function
:
.
.
Touch "-" or "+" control of the corresponding zone,
then the cooking zone will revert to the level you select.
Safety mode
Unlock:
Lock:
To ensure the safety of children, the induction hob is fitted with
an safety lock.
In working mode, press the " " key, the hob then goes
into the lock mode, timer will display " " and the
rest of the keys are disabled except the " " key.
In standby mode, press the "lock" key, the hob then goes
into the lock mode, the timer shows " " and the rest
of the keys are disabled. The timer shows" " for a
while and then goes off.
If you press the control , " " will be displayed for a
while.
Hold down the "Lock" key for 3 second, and the lock
function will be deactivate.
First of all, you should download SSimply-Fy and install to your
To use the WIFI function, switch the hob on and press
the WIFI control.The wifi LED will flash fast for 5 seconds
which means the WIFI module is booting up. If the WIFI
module connects to the router, the wifi LED will remain on all
cycles of 1 second on 1 second off.
WIFI FUNCTION
portable device. Then enroll your induction hob.
Refer to annex for details.
all the time. Otherwise, the WIFI LED will be flashing in
When the connection is made, you can find numerous
information on Simply-Fy, e.g. Zone power, time remaining etc.
EN-8
FLEXIBLE AREA
This area can be used as a single zone or as two different
zones, accordingly to your cooking needs.
Flexible area is made of two independent inductors that can
be controlled separately. When working as a single zone,
the part that is not covered by cookware is automatically
switched off after one minute.
- Anywhere with bigger cookware.
To grant a correct pan detection and a even heat distribution,
the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the
cookware is smaller than 22 cm.
As large zone
To activate the flexible area as a single large zone, simply press
the dedicated keys.
The power setting works as any other cooking zone.
If the pan is moved from the front to the rear part of the zone (or vice versa),
the flexible area automatically detects the new position,
keeping the same power.
As two independent zones
To use the flexible area as two different zones with different
power settings, press the dedicated controls.
3
8
5
?
1800
3000
Heating Zone
The maximum power of cooking zones is
as follows:
* $ *$ ! #
3000
Flexible Area
1800
000
3000
Deactivation of the continuum zone
the continuum key again
Resetting the power of the continuum zone or pressing
1800
4000
1800
3
3
3000
EN-9
$ # @ # #
+
+
$ * *
$ *$ * $ $
2
* !& # ! #$
# * * &
=
D
=
*
&
1 *& *
&
2 * &
%
#
#
* &
14
Use pans whose diameter is as large as the graphic of the zone selected.
4
Using a pot a slightly wider energy will be used at its maximum efficiency.If you use
smaller pot efficiency could be less than expected. Pot less than 140 mm could be
undetected by the hob.
EN-10
ENGLISH
$ # <
#* ##
##$&
&
$ #
$ $
(#&
* *
#
#
# $
$ ##&
# *
* $
$
&
## * $
#$ &
* <
* #
$ $
&
#
#
&
*
$ &
*
##
#
# &
#1# 8
9
$
$9
2 / : %;;%<=><:
: : :? @:::A9
"$ $B $ $ /
B /
$9
2 $/ $ /
9 / $
9
2 ? 9 C
B $ $ $ B $
B $ 9
C / B $ $ B $ $
B $ $ 9
) !
"
&
:
.&& ## &/
&
E# #
$ ##&
*
#*&
#
# $
* $
$ ; #&
: $&
#$ D
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
EN-11
$ $ $ #* #$
2
* &
## $ $ $
&
C #
F
##$ * #
$
* #
D # #
* . #
/
@# *
@# *
2 / $ / $
2 # ##$ &
2$
D
D
C $
@ @* # 2
" ## $ #
"F #$ *
$ * # ## $
@ @*&
#
Problem Possible causes What to do
F1-F6 Temperature sensor failure Please contact the supplier.
F9-FA Temperature sensor of the IGBT
failure.
Please contact the supplier.
FC The connection between the
display board and the main
board has failed.
Please contact the supplier.
E1/E2
Abnormal supply voltage Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E3/E4
Temperature sensor of the
ceramic glass plate is high Please restart after the
induction hob cools down.
E5
Temperature sensor of the IGBT
Please restart after the
induction hob cools down.
is high
Cleaning
ways:
THE HOB SHOULD NOT BE
IMMERSED IN HOT WATER!!!
Food residue,
melted aluminium
or plastics
EN-12
* $ & 1*
#$ # $ # &
$ $ * *
& ## ##
$ &
#
EN-13
Other manuals for HESD4 WIFI
2
Table of contents
Other Hoover Hob manuals
Hoover
Hoover HPI 82 User manual
Hoover
Hoover HF7 User manual
Hoover
Hoover HGH64SCE X User manual
Hoover
Hoover HF7 User manual
Hoover
Hoover H-HOB 500 User manual
Hoover
Hoover H-HOB 300 GAS User manual
Hoover
Hoover HVW6MW User manual
Hoover
Hoover HI642CTT User manual
Hoover
Hoover HVG6DC5B User manual
Hoover
Hoover HTPS64MCTT User manual
Hoover
Hoover HHK64C User manual
Hoover
Hoover Hob User manual
Hoover
Hoover HIES644DC User manual
Hoover
Hoover HIES430B Operation manual
Hoover
Hoover HIFS954MCTT User manual
Hoover
Hoover H-HOB 100 GAS User manual
Hoover
Hoover HVD640C User manual
Hoover
Hoover HI642DB1 User manual
Hoover
Hoover HGV6040B/1 User manual
Hoover
Hoover HVK64X Operation manual
