Hoover IRONjet User manual

1
Parts Descripon
1Soleplate
2Heat Resist Skirt
3Water Tank
4Handle
5Upper Cover
6Spray Nozzle
7Water Fill Cover
8Set Buon
9Front Cover
17
16
1
2
4
3
6
5
7
8
10
9
12
13
14
11
15
18
10 Lcd
11 Steam Control Knob
12 Spray Burst Buon
13 Steam Boost Buon
14 Rubber
15 Cord Sleeve
16 Back Cover
17 Beaker
18 Self-Clean Buon

2
2 -
Introducon
Dear customer,
First of all, we would like to congratulate you for purchasing this Hoover ironing system
and to thank you for the condence you have in Hoover brand.
This appliance has been manufactured with great care, respecng all of our quality
criteria and has been tested several mes. We hope its use will full your expectaons.
We are strongly convinced that it will make your ironing much faster and beer.
Before using your new Hoover appliance, please read carefully this user’s manual. If
you need further informaon or if you encounter any trouble which are not noced in
this manual, please contact the aer-sales service or your standard dealer.
Important Safety Instrucons
Read this user manual carefully before you rst use and save it for future reference.
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilies or lack of
experience and knowledge if they have
been given supervision or instrucon
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.

3
3
Important Safety Instrucons
• This product has been designed
for domesc use only. In case of any
commercial use, inappropriate use or
failure to comply with the instrucons, the
manufacturer is not responsible and the
guarantee will not apply.
• Before connecng your appliance, check
if the mains voltage is the same as the
voltage indicated on your appliance and
that the power outlet is connected to the
earth.
• Ensure before each use that the electric
cord or any other important part is not
damaged.
• Keep the iron and its cord out of reach
of children less than 8 years of age when it
is energized or cooling down.
• Never direct the steam towards persons or
animals. Never direct the steam jet towards
any other electrical or/and electronic
appliances.
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
• If the appliance shows evidence of
breakdown, malfuncon, leakages. Please
make sure it is checked by an authorized
Service Centre to avoid any danger.
• Always make sure the appliance is
switched o, unplugged and cooled down
before doing any maintenance work.

4
4
• The iron must not be le unaended
while it is connected to the supply mains
and before it has cooled down.
• Do not unplug the appliance by pulling
on the cord or on the appliance.
• Never immerse the iron, the stand, the
cable or the plugs in water. Never hold
them under the water tap.
• The soleplate of the iron can become
extremely hot and may cause burns if
touched. Never touch the electric cords
with the soleplate.
• If the supply cord is damaged, it must
be replaced by the manufacturer, service
agent or similarly qualied persons in
order to avoid a hazard.
• When placing the iron on its stand,
ensure that the surface on which the stand
is placed is stable.
• The plug must be removed from the
socket-outlet before the water reservoir is
lled with water.
• The surfaces with are liable to get
hot during use.
• To have a electronic copy of the
instrucon manual contact the aer sales
service in guarantee card.
• The iron must be used and rested on a
stable surface.
Important Safety Instrucons

5
5
Chapter 1: Preparaon for Use
Chapter 1.1 : What Kind of Water May be Used?
Chapter 1.2 : Filling the Water Tank
Chapter 1.3 : Seng the Temperature
Due to the powerful output of steam, Hoover recommends the use of an acve
ironing board with blowing and vacuuming funcon which allows escape of any
excess steam.
Place the ironing system on a stable and level surface, for example on the hard part of
an ironing board or on a heat-resistant surface.
The Hoover ironing system has been designed to be used with tap water only.
There is no need to use dislled or pure dislled water.
Nevertheless, in case you live in a hard water area, you can mix 50% of dislled water
with 50% of tap water.
Do not use any other kind of water or do not add any contents to water tank as it can
damage your appliance.
Filling With Water
Remove the mains plug from the wall socket before lling the iron.
Please ll your iron with normal tap water before using for the rst me.
Set the steam buon to the “0” posion and open the water ll cover.
Use the water beaker aached to ll clean tap water into water tank unl “MAX”
lling level.
Push the water ll cover rmly to close and dry any spilt water around the
enclosure of the appliance, do not overll.
WARNING: Do not add vinegar, hot water, perfume, or any other kind of chemical
agents or any other contents in the water tank. It could damage the steam
generator and shorten its life use.
Stand the iron on its heel and plug the power cord into wall socket and the LCD
backlight will come on, indicang that the iron is receiving power.
Press on the iron set buon unl you get the desired temperature seng. We
recommend using the LCD panel display fabric as a guide.
When the LCD panel shows the text (fabric name) ashing and LCD panel of
the top of the temperature mark recycling by short to long, indicang that the
soleplate is heang up.
They will stop ashing when the iron reaches the selected temperature.
When the LCD panel shows the text (fabric name) ashing and LCD panel of
the top of the temperature mark recycling by long to short, indicang that the
soleplate is cooling down.
When iron in working status, push the set buon and hold on for more than 3
seconds, then the iron will be in stand by status directly.
Stand by
Temperature
Mark
Fabric

6
6
Chapter 2 - Ironing
Dry Ironing
For dry ironing, turn the variable steam control knob all the way to the right to “0”.
This will cut o the steam ow if water is in the water tank.
Press on the temperature set buon to select the desired fabric/temperature seng,
posion the iron vercally on a smooth and stable area.
When the iron reaches the selected temperature, you can begin to iron.
Steam Ironing
As indicated on the temperature control and the table on the iron, steam-ironing is
only possible at higher ironing temperatures: “●●●” or “MAX”.
Ensure that there is enough water in the water tank.
Stand the iron on its end; Insert the mains plug into the wall socket.
Set the temperature set buon at the required posion within the steam area.
Remove the mains plug from the wall socket when the temperature seng process
shows error status.
Wait for the solepate to cool then plug the iron in again.
If the LCD panel sll shows error status, return the enre appliance to the nearest
service centre for examinaon and /or repair.
NOTE: Aer using the temperature seng buon, the backlight of LCD will become
duller. If the buon is not pressed within 30 seconds.
Aer 1 minute, the auto shut o will acon and the LCD backlight will go o.
Chapter 2.1 - Shot of Steam
Make sure the water tank is at least 1/2 lled with water.
When the iron temperature is set to a steam seng (more than level 6), a strong ow
of steam will be emied.
Press the steam boost buon, the soleplate will spray out a strong steam.
The burst steam feature can be used with Dry or Steam ironing as desired.
ATTENTION:
Do not aim iron at face, towards yourself, or anyone else while using or adjusng
steam. Burns or serious injury may occur.
LCD display
Normal status:
Error status:
Level 4 Level 5 Level 3 Level 2 Level 1 Stand by
Auto shut o Level 6 Level 9 Level 8 Level 7
Malfuncon1 Malfuncon2
Malfuncon3

7
7
Chapter 2.3 - Vercal Shot of Steam
Chapter 2.4 - Automac An-Calc Funcon
Chapter 2.5 - Automac An-Drip Funcon
Chapter 2.6 - Self Clean Funcon
When the iron temperature is set to steam seng vercal steam can be used.
Simply hold the iron vercally, posioned in front with a slight distance from the item
to be steamed, and press the steam boost buon.
ATTENTION: Do not aim iron at face, towards yourself, or anyone else while using or
adjusng steam. Burns or serious injury may occur.
NOTE: This is especially useful for geng wrinkles out of hanging clothes, curtains,
wall hangings etc.
Your iron contains an an-calc cartridge to reduce scale deposits. This considerably
prolongs the operaonal life of your iron.
The an-calc cartridge is an integral part of the water tank and dose not needs to be
replaced.
Your iron has an-drip funcon. The iron automacally stops generang steam when
the temperature is too low to prevent water from dripping out of the soleplate.
Use the self clean funcon once every two weeks. If the water in your area is very
hard, the self clean funcon should be used more frequently.
Make sure the iron is unplugged.
Set the steam control knob to posion “0”.
Fill the water tank to the maximum level.
Put the plug in the wall socket.
Select the maximum ironing temperature.
Unplug the iron when the temperature has reached.
Hold the iron over the sink, press and hold the self clean buon and gently shake the
iron to and fro.
Release the self clean buon aer 5-10seconds.
Repeat the self clean process if the iron sll contains a lot of impuries.
Chapter 2.2 - Spraying
Ensure there is enough water in the water tank.
Press the spray burst buon to produce a ne spray of water nozzle and connue
ironing.
NOTE: Do not spray silk.
Only use the steam boost buon when the steam iron has reached the steam or
maximum temperature.
Do not press this steam boost buon more than 3 mes repeatedly . For opmal steam
output, leave an interval of at least ve seconds between pressing the steam boost
buon .

8
8
Chapter 3: Maintenance and Cleaning
To prevent any risk of burns, all maintenance and cleaning operaons should only be
carried out when the unplugged appliance has cooled down for at least 2 hours.
Before cleaning, set the steam control knob to the “0” or “ ”, unplug the iron from
wall socket, and allow the appliance to completely cool down, and then clean with a
damp cloth, do not immerse the unit into water or other liquids.
Clean and empty the water tank aer every use.
If ironing clothes with high temperature, which is not recommended on the garment
table, this will cause burns to your clothes and residue le on the soleplate of the unit,
it is recommended that you iron over an old cloth to remove any residue from the
soleplate.
Aer use, set the steam control knob to the “0” or “ ”, disconnect the unit from
mains socket, empty remaining water from water tank and then store the iron aer it
has been completely cooled down.
Never use scouring pads, abrasive or chemical cleaners, or solvents
Chapter 2.7 - Auto Shut O Funcon
The auto-shut-o funcon automacally switches the iron o if it has not been moved
for a while.
When the LCD panel shows PAUSE status and the buzzer start beeping, the backlight
will turn to RED, the iron has been switched o by the auto-shut-o funcon.
To let the iron heat up again:
Pick up the iron or move it slightly.
The LCD panel shows originally status.
If the temperature of the soleplate has dropped below the set ironing temperature,
the LCD panel will show heang up.
If the iron need heat up aer you have moved the iron, unl it reached required
temperature before you start ironing.
If the iron does not require to heat up aer you move it, but sll indicates seng
mode, the iron can be used.
When Auto-shut-o funcon happens you may hear a sound.
NOTE:
Steam and boiling water will come out of the soleplate, impuries and akes will
be ushed out.
Do not push and hold the self clean buon while ironing.

9
9
Important Informaon
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local
Hoover dealer or direct from Hoover. When ordering spare parts, always check your
model number.
Hoover Service
Should you require service at any me, please contact your local Hoover Service Oce.
Please see all the contact details below.
Safety
Hoo ver believes that independent approval is the best way of demonstrang safety in
design and manufacture.
All Hoover iron systems have been manufactured in compliance of all safety
regulaons and approved by the most qualied independent approval cercaon
bodies.
ISO 9001
Hoover’s factories have been independently assessed for quality. Our products are made
using a quality system which meets the requirements of ISO 9001
The Environment
The symbol on this appliance indicates that this appliance may not be treated
as household waste. Instead it must be handed over to the applicable collecon
point for the recycling of electrical and electronic equipment. Disposal must
be carried out in accordance with local environmental regulaons for waste
disposal. For more detailed informaon about treatment, recovery and recycling
of this appliance, please contact your local city oce, your household and waste disposal
service or the shop where you purchased the appliance.
This product complies with the European Direcves 2006/95/EC, 2004/108/EC
and 2011/65/EC.
HOOVER Limited, Pentrebach, Merthyr Tydl, Mid Glamorgan, CF48 4TU, UK
Your Guarantee
The guarantee condions for this appliance are as dened by our representave in the
country in which it is sold. Details regarding these condions can be obtained from the
dealer from whom the appliance was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of this guarantee.
Subject to change without noce.

Printed in P.R.C.
PART No. : 48011051
®