Hoover 3010 PERFORMER User manual

Performer
3010
PERFORMER
Cyclonic BaglessTechnology
3 Stage Filtration
Compact, Lightweight Design
Compact Bagless
Vacuum Cleaner

1
7
8
2
9
3
4
6
5

3010 Performer
Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many
useful features built into your cleaner and we recommend that you carefully read this
instruction manual so that you may take best advantage of them.
Features:
1. Hose Inlet
2. Cable Rewind Button
3. Speed Control
4. On/Off Button
5. Hose
6. Handle
7. Telescopic Tube
8. Floor Head
9. Carry Handle
Specifications:
Watts: 1350W
Dust Capacity: 1L
Noise Level: <86dBa
TelescopicTube: Chrome
Power Cable Length: 4m
Weight: 5.5kg
Features
Part Part Number
Dust Container 33151743
Filter Cone 32200730
Hose 31220420
Filter Assembly Set 32200731
Please contact Hoover Customer Care: 1300 360 845 to find your local spare parts provider.

Before you Begin
The cleaner must be operated in accordance with these instructions and used only for domestic household
cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to
be used as an industrial cleaner, and is not designed for the collection of vitreous building material including
particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass
etc or excessive or frequent sand.The infrequent pick-up of these materials in these circumstances may be
harmful to your cleaner and may void the manufacturer’s warranty.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy place
for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning your unit,
when not in use, or attempting any maintenance task. The cleaner must only be connected to an AC supply
at the voltage shown on the rating plate. This cleaner should only be used for its intended purpose as
described in these instructions. Never operate the vacuum cleaner without lters.

Before you Begin
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators, and other
hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from
the floor or cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall, do not use the power cable,
gently pull the plug from the power socket.
5. If the air inlet, floor head or telescopic tube are blocked, you should switch off
the cleaner straight away and remove from mains power. First clear the blocked
substance before attempting to start the vacuum cleaner again.

Warning
To reduce the risk of fire, electric shock, or injury:
1. Donotleavethe applianceconnected tothe mainspower supplywhennotin use.Disconnectfromanypowersupplybeforeperforming
anymaintenanceduties.
2. Toreducetheriskofelectricshock,donotuse outdoorsoronwetsurfaces.
3. Thisappliancemustnotbe used as a toy.Donotallowchildrentouse theapplianceunattended.
4. Useonly as described in this instructionmanual.Donotuseforanyotherpurpose exceptthoseoutlinedinthisinstructionmanual.
5. Ifthe powercableorplugappears damaged,do notuse.Ifthevacuumcleanerisnotworkingcorrectly, has beendropped,damaged,
left outdoors,ordropped intowater,returntoa HooverserviceagentorcontactHooverCustomerCare:1300360 845/
sales@hooverfloorcare.com.au/www.hooverfloorcare.com.au.
6. Donotpullor carry theappliancebythepowercable,use thepowercableas a handle,orpullthepowercablearound sharpedges
orcorners.Avoidrunningthe applianceoverthepowercable.
7. Keepthe applianceawayfromheated surfaces.
8. Unplug theappliancebylightlygraspingandpullingthe plugfromthe wall. Donotunplugthe machine bypullingonthepowercable.
9. Donothandletheapplianceand/orpowercablewithwethands.
10. Alwaysensurethatallopeningsandentrypointsontheapplianceareclearfromobjects or anyblockages before commencing use.
Removalof dust, lint,hairanddirtfromallopeningsandentrypointswillhelpimproveairflowonthe appliance.
11. Keephair,looseclothing,fingersandallbodypartsawayfromopeningsandentry points on theappliance.
12. Ensuretheapplianceis switchedoff before unplugging
13. Useextra carewhencleaningon stairs.
14. Donotusetheapplianceto pickup flammableitems or combustible liquids(i.e.gasoline,hotashes,cigarettes,matchesoranything
burning)oruse in areaswhere suchsubstancesand itemsmaybe present.
15. Holdthe plugwhenrewindingontocordreel.Topreventaccidental injurydo not allowtheplugtowhipwhenrewinding.
16. Ensurethe applianceisdisconnectedfromthemainspowersupplybefore connectingthe hosetotheunit.
17. Donotuse theappliancewithout dustbagand/orfilterinplace.
18. Ifthepower cableisdamaged,returntoaHooverserviceagentor contact HooverCustomerCareinorder toavoidahazard.
19. Donotextendthepowercablebeyond thebluemark.
20. Donotimmersethe vacuuminto wateror other liquids
21. Donotpullorcarryby cord. Do notusecordasahandle,closeadoor on cord,orpullcordaroundsharpedgesor corners.
Donotrun applianceovercord. Keep cordawayfromheatedsurfaces.
22. Thisapplianceis not intendedforusebypersons(includingchildren)with reducedphysical,sensoryormentalcapabilities,or lack
ofexperienceandknowledge,unlesstheyhavebeengivensupervisionorinstructionconcerninguseof theappliancebyaperson
responsible fortheirsafety.Childrenshould besupervisedtoensuretheydo not playwiththeappliance.

Instructions for Use
Instructions for Use
Before using, unwind a sufficient length of cable and insert the plug into the
power socket. A yellow mark on the power cable shows the ideal cable length.
Do not extend the cable beyond the blue mark.
ON/OFF button
Rewind button
1. Press the on/off button to turn the cleaner on.
2. To rewind the power cable, press the rewind button
with one hand and guide the cable with the other hand
to ensure that it does not whip causing damage.
3. Slide the speed control to adjust the suction
of the cleaner.

Instructions for Use
Always remove the plug from the power socket before fitting or removing accessories!
Assembling the vacuum
cleaner
1. Fitting or removing the hose
To fit the hose, insert into the hose
inlet at the front of the cleaner.
Press until it clicks into position.
To remove the hose, squeeze the
end of the hose and gently pull from
the inlet.
2. Fitting the telescopic tube,
accessories and floor head
a. To fit the telescopic tube to the
handle, gently insert the end of
the handle into the top of the
telescopic tube.

Instructions for Use
b.To fit the floor head to the
telescopic tube, gently insert the
telescopic tube into the top of the
floor head as shown.
The adjustable floor head
is ideal for cleaning on
carpets and hard floors.
Floor Head
Extension Tube
Carpet Hard Floors

Maintenance
Emptying the dust canister
Always operate the cleaner with the dust canister correctly installed. Ensure the filter and dust bags
are correctly installed when the cleaner is in use to prevent any damage to the cleaner.
1. Gently remove the dust
canister by pulling in an
upwards direction.
2. Suspend the dust canister in an
upright position over a rubbish
bin (or location of disposal).
Press the locking button to
open base and allow the dust
to fall from the canister.
3. Close the base of dust canister
and insert the canister back
into the cleaner.