Hoover ONE PWR SPOTLESS GO User manual

QUICK
START
GUIDE
Did you know Hoover has Ready-To-Use
Solution for your Spotless GO?
Stop Mixing & Measuring and go to
Hoover.com/solutions to get yours today!
961003481 R1 CORDLESS SPOT CLEANER
Tough Mess or Stains? Pre-Treat the spot
by spraying the tool trigger above the
mess until fully wet. Let this set for 5
minutes before cleaning to get the best
results possible!
To keep your Spotless GO at max
performance, flush out the hose by
picking up clean water through the nozzle
to prevent any odors or bacteria growth
TIPS & TRICKS
PWR UP.
Add Batteries for More Runtime.
Buy now at Hoover.com/ONEPWR
to purchase additional ONEPWR batteries
Register your product today for
product support & special offers
Hoover.com/product-registration

SCOOP OUT DEBRIS
FROM RED SCREEN
after every use
for best performance
FOR BEST PERFORMANCE
Complete system care
after each use
WHEN FULL, THERE WILL BE A
CHANGE IN OPERATING SOUND
Empty dirty water tank promptly
GETTING STARTED HOW TO USE
SYSTEM CARE
Fully charged
1
Charge battery
3
Remove solution tank, fill, & re-insert
2
Insert battery
1
Power on
2
Squeeze trigger to apply
cleaning solution
3
Pull backwards to remove water
1
Remove dirty tank
2
Remove lid and empty
3
Clean nozzle cover
PRO TIPS
FOR TOUGH STAINS: pre-treat by spraying stain first and allow time to loosen
ONLY USE HOOVER
PREMIX SPOT SOLUTIONS
FILL & GO
Use included
pre-mix
solution.
No Water Required
MAX FILL 8oz
*ALWAYS READ DIRECTIONS
ON BOTTLE
PRO TIPS