Hoover TC5235 001 User manual

CANISTERS
39000708 TC5235 001
Service Manual

39000708 TC5235 001 1015 (05/04/2010)
Ref. Descrizione - Description - Beschreibung - Descripcion
Fine
Ending
Fin
End
Fin
Inizio
Beginning
Debut
Begin
Inicio
Ricambio
Part No.
Piece
E-Teil
Pieza
Copyright 2011 Gias S.r.L.
1 Motor mount - fan end 48000582
2b Motor Kit 49019891
3 Motor mount - commutator end 48000593
4 Screw 02105005
15 Chassis 48000863
17 Rear wheel 48000864
21 Castor wheel 04320016
21a Castor support 48000865
38 Top cover 48002397
47 Hose assembly 35600361
48d Telescopic extension tube 48000880
49a Cover handle 03945039
61a Micro filter 04365030
63 Motor cover 03726030
66 Bag door seal 03875063
69 Bag full indicator 03935011
70 Pre-motor filter 03875166
70a Filter kit 09205451
85 Pressure switch tube 06605089
88 Electronic module 48000581
90 Module housing (protection) 03645010
96 Spring 03835006
101 Bag holder 03645055
102 Seal 03870606
105 Motor support 03715021
120 Floor nozzle 04845090
120a Parquet nozzle 04845044
157 Handle tube upper (curved hose end) 48000874
165 Valve 04350201
184 Noise reducer 03945048
186 Noise reducer 03945026

39000708 TC5235 001 1015 (05/04/2010)
Ref. Descrizione - Description - Beschreibung - Descripcion
Fine
Ending
Fin
End
Fin
Inizio
Beginning
Debut
Begin
Inicio
Ricambio
Part No.
Piece
E-Teil
Pieza
Copyright 2011 Gias S.r.L.
193 Cord clamp 03610367
202 Silencer 03945049
248 On/Off pedal 48000867
249 Cord reel pedal 48000866
251a Motor housing seal 03875167
257 Roundel (Hoover emblem) 05165002
263 Flexible hose without edges 35600360
280 Cord reel complete 04685037
282 Potentiometer spindle 03275004
285 Button spring 03835005
368 Litter picker 03955000
400 Seal for partition 03875168
432 Cover 03726063
701 Bulkhead gasket 03115004
720 Spring 03835024
914 Seal 03875175
915 Seal 03115010
1075 Frame 03726033
1114 Multi function tool 04865025
1202 Cyclonic unit assy 48000962
1203 Grill seal 03875170

SENSORY Suction Cleaners
SENSORY Fitting Notes (Base Models)
Access to Main components
Open fully the Bag cover using the moulded handle at the rear of the cleaner, if
required to remove fully unclip at the front of Bag cover by prising the 2 lugs on front
handle from the Lower body and remove.
Remove the Exhaust filter assy from the Motor cover, remove the 4 screws at each
corner of the Motor cover and lift up.
Motor Removal
Procede as above Access to Main components
Remove the Motor Mount upper you now have access to the Motor.
Make a note of the 2 wires attached to the Motor and remove, lift out the Motor along
with the rubber mount and plastic motor support , unless damaged you can leave the
Motor mount lower in place.
Cord Reel /Module (On/Off Switch) Removal
Procede as above Access to Main components
Module Removal
You now have access to the Cord reel and Module (Includes On/Off Switch), to
remove the Module and On/Off Switch unclip the module from its housing and unclip
the Bag check indicator tube.
Lift up the Module assy and the Cord reel enough to gain access to the leads on the
Cord reel, next taking note of the connections remove the 2 leads to the Cord reel
assy then remove the 2 leads at the motor and pull the leads through the aperture in
the Lower body, replace the Module(On/Off Switch).
Cord Reel Removal
Procede as above Access to Main components
Lift up the Module assy along with the Cord reel assy, disconect the 2 leads to the
module and unclip the Bag check indicator tube you can now remove the Cord reel.
When replacing the Cord reel refit in the aperture of the lower body, care needs to be
taken that the Cord reel brake button is in place to engage when the Cord reel pedal
is pressed.

SENSORY Suction Cleaners
Cord Reel /On Off Pedals Removal
Open fully the Bag cover using the moulded handle at the rear of the cleaner, if
required to remove fully unclip at the front of Bag cover by prising the 2 lugs on front
handle from the Lower body and remove.
You now have access to the Motor cover, remove the 4 screws at each corner and lift
away, turn the Motor cover upside down the pedals are each located by 3 lugs using
a Terminal screwdriver prise away one lug at a time and push down the Pedal and
remove.
Rear Wheel Removal
Turn the cleaner upside down, using a flat bladed screwdiver feel for one of the 3
lugs holding the Rear wheel in position and push in, using your other hand push the
wheel away from you and gently ease away.
Castor Wheel Removal
Turn the cleaner upside down, using a Terminal screwdriver gently ease away and
pull away from cleaner.
Electrical Checks
Check condition of plug--------- if the pins are burnt or body cracked take
appropriate action.
Check condition of the mains lead ---------------if chipped or burnt,take
appropriate action.
Insulation test
Open fully the Bag coverr
Remove the pre - motor filter.
Use a Metrohm.
Bond the Live and Neutral pins with one of the meter clips and connect the other
meter clip to a terminal screwdriver.
Insert the screwdriver through the grill onto the fan casing.
Select- The MEGOHMS SCALE =MINIMUM READING 1 MEGOHM

SENSORY DUST MANAGER CYCLONIC
Sensory Cyclonic
FILTERS
PREMOTOR FILTERS EXHAUST FILTERS
S76 T57
Product code: 03875166 Product code: 04365030
EAN code: 8016361900639 EAN code: 5010418160932
Chinese production Washable microfilter
S58 T70
Product code: 03875043 Product code: 04365062
EAN code: 5010418159455 EAN code: 8032767162198
Double layer premotor filter
European production
Washable HEPA filter
FILTER KITS CYCLONIC CASSETTE FILTERS
U27 T76
Product code: 09205469 Product code: 04365081
EAN code: 5010418169904
HEPA exhaust filter + both new
and old premotor filter version to
satisfy all customers
EAN code: 8016361900721
U28
Product code: 09205451
EAN code: 5010418169898
Washable exhaust microfilter +
both new and old premotor filter
version to satisfy all customers
BAGLESS CYCLONIC VERSION
The unique Dust Manager
Cyclonic Cassette separates
vacuumed dust from air by
the action of the centrifugal
force that bursts out inside
it.

HOSES
HOSE COMPLETE HOSE
E32 D79
Product code: 35600360 Product code: 35600361
EAN code: 8016361734104 EAN code: 8016361734111
COMPLETE ZOOM TUBE
D92
Product code: 35600526
EAN code: 8016361743434
* Picture as an example
NOZZLES
CARPET & FLOOR NOZZLES TURBO NOZZLE
G72 J22
Product code: 04845090 Product code:04845091
EAN code: 8016361900646 EAN code: 8016361900653
G51 J19
Product code: 04845034 Product code:04845046
EAN code: 5010418146707 EAN code: 5010418158809
CARESSE NOZZLE
G57 G50
Product code: 04845038 Product code: 04845044
EAN code: 5010418164350 EAN code: 5010418158793
Sensory Cyclonic