Horizon Hobby LOSI TLR TUNED LMT User manual

LOS04027
Before operating this vehicle, please read all
printed materials thoroughly. Horizon Hobby is not
responsible for inadvertent errors in this manual.
INSTRUCTION MANUAL
Created 11/22
Scan the QR code and select the Manuals and Support quick links
from the product page for the most up-to-date manual information.
LOSI TLR TUNED LMT 1/10 KIT

2
WELCOME TO LOSI TLR TUNED
With its strong racing heritage and dedication to winning, the TLR (Team Losi Racing) brand represents the peak of RC vehicle design. Now the Losi TLR Tuned LMT shares that expertise
with you. Loaded with TLR option parts, it’s the solid axle monster truck that comes prepared for every step of your climb to become the champion.
You feel a sudden rush in those final seconds before the light turns green. It’s the moment of the race when your preparation and the potential of your TLR Tuned LMT come together
in a surge of confidence, ready to be released with a squeeze of the throttle trigger. As you put the power to the ground, corner flat, launch jumps, and soak in the landings, you move
closer and closer to the pinnacle of RC monster truck performance.
Freestyle is next. Becoming the freestyle champion means jumping, flipping, and sliding at the edge of any truck’s limits. But it’s no problem for the TLR Tuned LMT. Durable aluminum
parts give you the grit to power out harsh landings, while carbon fiber upgrades offset their weight and improve support.
For these reasons and more, with the TLR Tuned LMT as your partner, there’s no place to go but up. The TLR passion for racing shines through with increased acceleration, improved
cornering, and many more high-performance capabilities. Experience the difference it makes — in your truck and in you.
Age Recommendation: Not for children under 14 years. This is not a toy.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in
damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and
responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use
with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation
and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage
or serious injury
WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product.
Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility
with DSM or Spektrum.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit
horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
MEANING OF SPECIAL LANGUAGE
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.
SAFETY PRECAUTIONS AND WARNINGS
• Always keep a safe distance in all directions around your model to avoid collisions
or injury. This model is controlled by a radio signal subject to interference from many
sources outside your control. Interference can cause momentary loss of control.
• Always operate your model in open spaces away from full-size vehicles, traffic and
people.
• Always carefully follow the directions and warnings for this and any optional support
equipment (chargers, rechargeable battery packs, etc.).
• Always keep all chemicals, small parts and anything electrical out of the reach of
children.
• Always avoid water exposure to all equipment not specifically designed and protected
for this purpose. Moisture causes damage to electronics.
• Never place any portion of the model in your mouth as it could cause serious injury
or even death.
• Never operate your model with low transmitter batteries.

3LOSI TLR TUNED LMT 1/10 KIT
TOOLS REQUIRED
1.5mm Hex Wrench
2mm Hex Wrench
2.5mm Hex Wrench
5.0mm Nut Driver
5.5mm Nut Driver
8.0mm Nut Driver
Body Scissors
Needle-Nose Pliers
Regular Pliers
Hobby Knife
SPECIFICATIONS
Wheelbase 15.0 in (381mm)
Front Track Width 15.25 in (388mm)
Rear Track Width 15.25 in (388mm)
Overall Height 10.5in (267mm)
Overall Length with Tires 20.75 in (526mm)
REQUIRED COMPONENTS RECOMMENDED COMPONENTS PART NUMBER
Transmitter DX5 Pro DSMR Tx Only SPMR5010
Receiver SR315 DSMR 3 CH Receiver SPMSR315
Steering Servo S6280 U-T / H-S Digital HV WP Servo SPMSS6280
Motor Firma Brushless Motor, 3150Kv, 4mm Bullet SPMXSM1000
ESC Firma 130A Brushless Smart ESC, 2S-4S SPMXSE1130
Battery 5000mAh 2S 7.4V SmartG2100C IC5 SPMX52S100H5
Charger Smart S1200 G2 AC Charger; 1x200 SPMXC2020
KIT/MANUAL ORGANIZATION
The kit is composed of different bags marked A through I, and Spare Hardware. If assembling to the recommended kit setup, the Spare Parts bag will not be needed. It is highly
recommended to only open one Sub Bag (for example, A1) at a time. Once complete with the manual steps to complete this bag, you should have no parts remaining and be ready for
the next Sub Bag (for example, A2).
TLR-LOK
Apply TLR-Lok™Threadlock - TLR76009
Apply High Pressure Black Grease - TLR77000
GLUE
Apply CA Glue - TLR76007
Degrease with Motor Spray
-DYN5500
OIL
Fill With Silicone Oil
Pay Special Attention
CUT
Cut/Trim
Ensure Free Movement
Ensure Free Rotation
Ensure Proper Orientation
Push Firm
L
Side Shown
L
R
L
R
Assemble Other Side the Same
x2 Repeat/Build Multiple
Screw Partially
DO NOT Over- Tighten/Snug Tight
Tighten
ICON KEY

6.0 x 11.0 x 0.2mm 8.0 x 13.0 x 0.2mm 8 x 14 x 4mm FLO-Ring
LOS242037 (x2) LOS246004 (x2) LOS242037 (x2) LOSA6948 (x2)
6.0 x 11.0 x 0.2mm 8.0 x 13.0 x 0.2mm 8 x 14 x 4mm FLO-Ring
LOS242037 (x2) LOS246004 (x2) LOS242037 (x2) LOSA6948 (x2)
LOS242038 (x2) LOS242038 (x2) LOS242037 (x2)
LOS242035 (x2)
LOS242038 (x2) LOS242038 (x2) LOS242037 (x2) LOS242040 (x2)
LOS242037
LOS246004
LOSA6948
LOS242035
LOS242038 LOS242038
LOS247037
LOS242037
LOS242035
LOS246004
LOSA6978
LOS242037
LOS242038
LOS242037 1
2
x2
x2
Front and Rear
Differential Assemblies
123
21
4
A1
A2

M3 x 12mm FH
LOS242037 (x8)TLR5963 (x8) LOS242037 (x4) LOS242036 (x2)
2Fill with 100k weight oil
(front and rear) to a weight
of 42.5g. Use a scale accurate
to .01g.
OIL
LOS242037
LOS242037
TLR5963
LOS242037
LOS242037
LOS242036
Set the diff
assembly aside
x2
1
3Tightening Order
1
2
4
3
5LOSI TLR TUNED LMT 1/10 KIT
A3

6.0 x 11.0 x 0.2mm O-Ring 8 x 14 x 4mm FL
LOS242037 x1 LOS242037 x1 LOSA6948 x1
LOS242039 (x1) LOS242037 (x1) LOS242035 (x1)LOS242039 (x1)
LOS242039 x1 LOS242037 x1 LOS242040 x1
6.0 x 11.0 x 0.2mm O-Ring 8 x 14 x 4mm FL
LOS242037 x1 LOS242037 x1 LOSA6948 x1
LOS242039
LOSA6948
LOS242035
LOS242037
LOS242039
LOS242037
LOS242039
LOSA6948
LOS242040
LOS242037 LOS242037
LOS242039
12 3
2
1
Center Differential Assembly
1
2
6
A4
A5

M3 x 12mm FH
LOS242037 (x8)TLR5963 (x8) LOS242037 (x4) LOS242036 (x2)
LOS242037
LOS242037
LOS242037
LOS242037
TLR5963
LOS242036
1
3
Fill with 500k weight oil
to a weight of 42.5g. Use
a scale accurate to .01g.
2
3
1
4
Tightening Order
Set the diff
assembly aside
7LOSI TLR TUNED LMT 1/10 KIT
A6
2
OIL

M4 x 25 Setscrew 7mm
TLR144000 (x8) LOS244010 (x8) LOS244011 (x8) TLR144000 (x4)
M4 x 25 Setscrew 7mm
LOS244013 (x8) LOS244010 (x8) LOS244011 (x8) LOS244013 (x4)
TLR-LOK
TLR-LOK
1 drop
1 drop
TLR144000
LOS244011
TLR144000
LOS244011 LOS244010
TLR-LOK
TLR-LOK
LOS244013
LOS244011
LOS244013
LOS244011
LOS244010
1 drop
1 drop
8
B1
B2

TLR143003 (x4) TLR143003 (x4) TLR143003 (x8) TLR143003 (x4) TLR143003 (x4)
TLR143000 (x4) TLR143000 (x4)
M2.5 Nylock Nut M2.5 x 5.0mm 3 x 1.4mm
TLR6312 (x4) TLR233043 (x4) LOS243027 (x2)
3 x 1.6mm
LOS243027 (x2)
TLR143001 x4
LOS243027
3 x 1.6
LOS243027
3 x 1.4
Rear Front
TLR143003
TLR143000
TLR143003
TLR143003
TLR143000
TLR6312
TLR233043
TLR143001
x4
x4
9LOSI TLR TUNED LMT 1/10 KIT
C1
C2

7mm
LOS244010 (x4) TLR143004 (x4) TLR143003 (x4)
M2.5 x 4mm BH
TLR233043 (x4) TLR233043 (x4) TLR143000 (x4)
FR - 40WT
TLR74010
RR - 40WT
TLR74010
TLR143003
TLR143004
LOS244010
x4
TLR143000
TLR233043
12
34
X3
OIL
Slow
x4
10
C3
C4

M2.5 x 10mm BH O-Ring
TLR255002 (x4) TLR143003 (x4) TLR143000 (x4) TLR143004 (x4)
Green, 3.0 lbs, Front
TLR143006 (x2)
Orange, 3.6 lbs, Rear
TLR143007 (x2)
M2.5 x 10mm FHM3 Nylock Nut
TLR6313 (x1) TLR235007 (x3) LOS242032 (x1) TLR141000 (x1)
TLR143006 - FR
(Green)
TLR143007 - RR
(Orange)
TLR143003
TLR143004
TLR255002
TLR143000
2
3
OIL
TLR6313
LOS242032
TLR141000
TLR235007
TLR235007
x4
1
11LOSI TLR TUNED LMT 1/10 KIT
C5
D1

6 x 12 x 4mm BB 13TC-Clip
LOS246005 (x1) LOSA6940 (x2) LOS242043 (x1) LOS242032 (x1)
M3 x 16mm FH M3 x 12mm FH M3 x 20mm BH
TLR5964 (x2) TLR5963 (x2) TLR5911 (x2) LOS242032 (x1)
LOS242032
LOS242043
LOS246005
LOSA6940
TLR5964
TLR5911
TLR5963
LOS242032
12
D2
D3

M2.5 x 10mm BH
TLR255002 (x2)
M2.5 x 10mm FH
TLR235007 (x8)
RH LH
RH LH
LOS241035 (x1) LOS241035 (x1) LOS241035 (x1) LOS241035 (x1)
M3 x 12mm BH
TLR5904 (x3)
M2.5 x 10mm FH
TLR235007 (x3)
M3 x 18mm BH
TLR5905 (x2)
LOS241073 (x2) LOS241073 (x1) LOS241075 (x2)
TLR255002
TLR235007
LOS241035
TLR235007
TLR235007
TLR5905
LOS241073
LOS241075
LOS241073
TLR5904
TLR5904
TLR5904
13LOSI TLR TUNED LMT 1/10 KIT
D4
D5

M3 x 12mm BH
TLR5904 (x2) LOS241069 (x1)
M3 x 18mm BH
TLR5905 x2
M3 x 12mm BH
TLR5904 x3
M2.5 x 10mm FH
TLR235007 x3
M3 x 16mm FH
TLR5964 x2
LOS241069
TLR5904
TLR5904
TLR5905
TLR5904
TLR5904
TLR5904
TLR5964
TLR253007
TLR253007
14
D6
D7

M3 x 20mm BH
TLR5911 (x4)
M3 x 14mm BH
TLR5910 (x4)
M3 Nylock Nut
TLR6313 (x2) LOS234024 (x2)
TLR141000 (x2) LOS241072 (x4) LOS240029 (x2) LOS244006 (x1) LOS244006 (x2)
M3 x 10mm BH
TLR5903 (x4)
M3 Nylock Nut
TLR6313 (x4)
TLR141000
TLR141000
TLR141000
TLR5911
TLR5911
TLR5903
TLR5903
TLR6313
TLR5910
TLR5910 LOS244029
LOS244029
LOS241072
LOS234024
LOS234024
TLR6313
15LOSI TLR TUNED LMT 1/10 KIT
D8
D9

M3 x 20mm FH
TLR5965 (x1)
M3 x 12mm BH
TLR5904 (x10) TLR141001 (x1) TLR141001 (x1)
TLR141001 (x1) TLR141001 (x1) TLR141001 (x1)
M3 Nylock Nut
TLR6313 (x4)
M3 x 10mm BH
TLR5903 (x4) LOS244006 (x1) LOS244006 (x2) TLR141000 (x2)
TLR141001
TLR141001
TLR5965 TLR5904
TLR5904
TLR5904
TLR6313
TLR6313
TLR5903
TLR5903
LOS244006
TLR141000
16
D10
D11

M3 x 14mm BH M3 x 20mm BH
TLR5910 (x4) TLR5911 (x4)
M3 Nylock Nut
TLR6313 (x2) LOS234024 (x2)
LOS241072 (x4) LOS240029 (x1)
M3 x 10mm BH
TLR5903 (x4)
M3 Nylock Nut
TLR6313 (x4)
TLR5910
TLR5910
TLR5911
LOS241072
LOS240029
LOS234024
LOS234024
TLR5911
TLR6313
LOS241072
TLR6313
TLR5903
TLR5903
17LOSI TLR TUNED LMT 1/10 KIT
D12
D13

M3 x 18mm BH
TLR5905 (x3)
M6 x 12 x 4mm BB
LOSA6940 (x1)
M5 x 13 x 4mm BB
LOSA6955 (x2)
M4 x 8 x 3mm BB
LOS257007 (x1)
E-Clip
LOS246005 (x1) LOS242044 (x1) LOS242044 (x1) LOS242044 (x1) LOS242044 (x1)
LOS242044 (x1) LOS242044 (x1)
LOSA6955
LOSA6940
LOS242044
LOS242044
LOS257007
TLR5905
TLR5905
LOS242032
LOS246005
2
1
3
4
18
D14

M3 x 16mm CH
TLR5934 (x4)
M3 x 12mm FH
TLR5963 (x2) LOS242047 (x2) LOS242056 (x2)
LOS242057 (x2) LOS242032 (x2) LOS242032 (x1)
LOS242047
LOS242047
LOS242057
TLR5932
TLR-LOK
TLR5963
LOS242032
TLR5934 TLR5934
LOS242032
LOS242032
1
3
2
4
x2x2
TLR-LOK
TLR-LOK
When installing the center driveshafts, be sure to
align the screw side of the screw pin with the flat
spot on the output shaft of the center differential.
The ring gear should be oriented
towards the front of the truck.
1 drop
1 drop
1 drop
1
1
2
19LOSI TLR TUNED LMT 1/10 KIT
D15

M3 x 25mm BH
LOS235024 x4
LOS235024
LOS235024
20
D16