Horst Welding CHCF30 User manual

HORST WELDING
8082 Rd 129
Listowel, ON N4W 3G8
Canada
519-291-4162
1-866-567-4162
Fax [phone]
[email protected]
www.horstwelding.com
!
Do not attempt to operate the equipment without thoroughly
reviewing this manual for safe and proper operation.
Rev 030420 HW00100.CHCF Header Wagon Owner Manual.sis.140120
Operator’s Manual
Keep this manual with the machine at all times
PRINTED IN CANADA
Header Wagon
CHCF30, CHCF36, CHCF3627, CHCF45, CHCF4527
!
CAUTION
Operational Hazard
Personal Protection Equipment
(PPE) is required when operating
or maintaining this machine.
SNL00001
!
CAUTION
Operational Hazard
Do not exceed travel speed
rating of the components:
Maximum 50 km/h (30 mph).
Obey SMV speed limits.
50
km/h
30
mile/h
MAXIMUM
IL00007

2
Notes

3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Serial Number Location . . . . . . . . . . . . . . . . . 4
General Information . . . . . . . . . . . . . . . . . . . . 5
Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
California Proposition 65 . . . . . . . . . . . . . . . . . . .5
. . . . . . . . . . . .5
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
 . . . . . . .6
 . . . . . . . . . . . . . . . . . . . . . . .7
Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . .8
 . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Maintenance Safety . . . . . . . . . . . . . . . . . . . . . . .9
Operation Safety. . . . . . . . . . . . . . . . . . . . . . . . . .9
Storage Safety . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Ratchet Strap Safety . . . . . . . . . . . . . . . . . . . . .10
 . . . . . . . . . . . . . . . . . . . . . . . . .10
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . 11
Safety Label Descriptions. . . . . . . . . . . . . . . . . . 11
If labels need to be replaced: . . . . . . . . . . . . . . . 11
Safety Label Layout . . . . . . . . . . . . . . . . . . . . . .12
 . . . . . . . . . . 13
 . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Assembly & Inspection. . . . . . . . . . . . . . . . . 15
Equipment Matching . . . . . . . . . . . . . . . . . . . 15
Components and Features . . . . . . . . . . . . . 16
CHCF Series Wagon Components. . . . . . . . . . .16
Universal Header Pads. . . . . . . . . . . . . . . . . . . .17
Quick Release and Lock . . . . . . . . . . . . . . . . . . . . . 17
Base Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Large Pad for Draper Head . . . . . . . . . . . . . . . . . . 18
 . . . . . . . .18
 . . . . . . . . . . . . . . . . . . . . . . 18
High Back Pad for Flex Draper Head . . . . . . . . . . . 19
Low Back pad for Standard Cutting Platform . . . . . 19
Standard Corn Head with Low Back . . . . . . . . . . . . 19
 . . . . . . . . . . . .20
Height Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Depth Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Ratchet Strap System. . . . . . . . . . . . . . . . . . . . .21
Release the strap from the ratchet:. . . . . . . . . . . . . 21
 . . . . . . . . . . . . . . . . . . . . . . . . 21
 . . . . . . . . . . . . . . . . .22
Safety Chain: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Spring Balancer: . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Retractable Pullout w/ auto lock:. . . . . . . . . . . . . . . 22
 . . . . . . . . . . . . . . . . . . . . . . . . 23
 . . . . . . . . . . . . . . . . . . . . . . . . .23
 . . . . . . . . . . . . . . . . . 23
 . . . . . . . . . . . . . . . . . . 24
Header Wagon Capacity. . . . . . . . . . . . . . . . . . .25
Four Wheel Steer . . . . . . . . . . . . . . . . . . . . . . . .25
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Universal Header Pads. . . . . . . . . . . . . . . . . . . .26
: . . . . . . . . . . . . . . . . . . . . . . 26
 . . . . . . . . . . . . . . . . . . . . . . . . . .27
 . . . . . . . . . . . . . . . . . . . . .27
Field Operation . . . . . . . . . . . . . . . . . . . . . . 28
Operation Safety Checklist . . . . . . . . . . . . . . . . .28
Prepare. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Loading the Header . . . . . . . . . . . . . . . . . . . . . .29
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
 . . . . . . . . . . . . . . . . . . . . . . 30
 . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Storage Safety Checklist . . . . . . . . . . . . . . . . . .31
Placing the Implement in Storage: . . . . . . . . . . .31
Service & Maintenance . . . . . . . . . . . . . . . . 32
Maintenance Safety Checklist . . . . . . . . . . . . . .32
Wheel Bearings: . . . . . . . . . . . . . . . . . . . . . . . . .32
Wagon Components: . . . . . . . . . . . . . . . . . . . . .33
. . . . . . . . . . . . . . . . . . . . . . . . .34
 . . . . . . . . . . . . . . . . . . . . . . .34
 . . . . . . . . . . . . . . . . . . . . . . . .35
 . . . . . . . . . . . . . . . .36
. . . . . . . . . . . . . . . . . . . . . . .36
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . 37
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 40
CHCFK Fender kit . . . . . . . . . . . . . . . . . . . . . . .40
. . . . . . . . . . . . . . .40
 . . . .40
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4
Horst Contour 4 Wheel Steer Header Wagon. Your Contour Header Wagon has
been designed and manufactured to give you many years of dependable service. Horst CHC header wagons unique
󰀨
site.



need to rely on a steady trailing wagon.
󰀩
be assembling, operating, maintaining or working with this product, are required to read and completely understand the
information and instructions contained in this manual.
If anyone does not fully understand every part of this manual, please obtain further assistance by contacting the dealer
from which this product was purchased or by contacting Horst Welding with the information listed on the cover of this
manual.
Keep this operators manual available for reference by the operator and to pass on to new owners and/or operators .

the assembly manual.
CHCF30, CHCF36, CHCF3627, CHCF45 CHCF4527
In this manual the CHCF series header wagons may be referred to as “implement”, “wagon” or “header wagon”

Model Number ________________________________________
Serial Number ________________________________________


axle.
Please record your serial number here as a handy reference. In case of warranty issues, your dealer will ask for the serial
to verify your warranty.
Manufactured by
HORST WELDING
MODEL NO.
SERIAL NO.
MADE IN CANADA

5


manner. Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and

engineering and/or production changes, this product may vary slightly in detail. Horst Welding reserves the right to update

In this manual:
• Travel speed rating refers to the maximum speed the trailer components are design for.
• Maximum road speed refers to the 40 km/h for slow moving vehicles displaying a SMV.


purpose of hauling harvester heads.

horstwagons.com 
our online parts catalogue.

You may see a warning label similar to the following:
WARNING
Cancer and Reproductive Harm
www.P65 Warnings.ca.gov


SIS)
High Speed Tractors Traveling Faster Than 25 mph
SIS standard is part of the US Federal Regulation 49CFR Part 562. (Does not apply in Canada)

designed for ground speeds greater than 40 km/h (25 mile/h) but under 65 km/h (40 mile/h), when operating or traveling

speed of Horst Header Wagons is 30 mile/h.
SMV sign.
Horst Wagons supplies a bracket and SIS for U.S. customers to use if they intend on traveling on public roads at speeds
greater than 25 mile/h. See the assembly reference book for your header wagon.

6
!

ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!

manual. When you see this symbol, read and understand the message, be alert to the poten
tial hazard in the message. Follow the instructions in the safety message.
DANGER 

ponents which, for functional purposes, cannot be guarded.
WARNING

It may also be used to alert against unsafe practices.
CAUTION

IMPORTANT

DANGER, WARNING, CAUTION and IMPORTANT are used to indicate the degree of hazard to


In the owners manual, when a hazard is present you will see a 
• safety alert symbol,
• safety term
• safety hazard
• safety hazard explanation
When applicable you may also see the appropriate safety label displayed with the message, as shown below.
!
WARNING
Pinch Point Hazard

tial pinch point, be aware of where

the top rail. SL00002
Safety Label

Safety Hazard

Safety Hazard Explanation



7
ACCIDENTS CAN BE PREVENTED WITH
YOUR HELP!
YOUYOU must ensure that you and anyone
else who is going to use, maintain or work around the implement be familiar with the work and maintenance procedures

day and alerts you to all good safety practices that should be used.
Remember, YOU are the key to safety. Good safety practices not only protect you but also the people around you. Make
󰀨
familiar with the recommended maintenance and work procedures and follow all the safety precautions. Most accidents

The best accident prevention is a careful operator.
Horst Welding and your dealer ask that YOU be that careful, responsible equipment operator.

YOU ARE THE KEY TO SAFETY:
•Familiarize yourself, and anyone else
who will operate, maintain, or work around
this product, with the safety and operation
information contained in this manual.
• Read and understand the safety labeling which
appears on the implement.
• 
the need arise and know how to use it.
• 
your mind lose concentration on what you are doing.
No accident prevention program can be successful
without the wholehearted cooperation of the person
who is directly responsible for the operation of the
implement.
• 
the need arise and know how to use it.
• 
safety precautions and by using good safety practices.
• 
come from equipment operators who accept their
complete responsibility and anticipate the results of
their actions.
• Never exceed the limits of the implement. Safety
of the operator and safe operation are the main
concerns in designing a safe product, however

result in a accident which could have been prevented.
•Do not allow riders on the implement,
loaded or empty.
•Do not operate this implement under the

• 

• Wear appropriate personal protective equipment
(
• Hard hat
• Heavy gloves
• Hearing Protection
• Protective foot wear
• Protective eye wear
• Safety Vest

8

Safety of the operator and bystanders is one of the chief concerns in developing and designing equipment. However,
every year many accidents occur which could have been avoided by a few seconds of thought and a more cautious
approach to handling equipment.



and accident prevention are dependent upon the awareness, concern, and proper training of personnel involved in the
operation, transport, maintenance, and storage of the implement. Refer also to safety messages and operation instruction
󰀩
to the implement.
1. In order to provide a better view, certain illustrations
in this manual may show an assembly with a safety
device removed. However, equipment should never be
used in this condition. Keep all safety devices in place,
if removal becomes necessary for repairs, replace the
device prior to use.
2. Replace any safety label or instruction sign that is
unreadable or is missing. Location of safety signs is
indicated in this manual.
3. Never use alcoholic beverages or drugs which can
hinder alertness or coordination while using this
implement. Consult your doctor about using this
implement while taking prescription medications.
4. Under no circumstances should young children be
allowed to work with this implement.
5. 
with its operation. Do not allow persons to use or
assemble this unit until they have read this manual
and have developed a thorough understanding of the
safety precautions and of how it works. Review the
safety instructions with all users annually.
6. If the elderly are assisting with work, their physical
limitations need to be recognized and accommodated.

and physically able person familiar with machinery
and trained in this implement’s operations.
7. Never exceed the limits of the implement. If its ability


8. Do not modify the implement in any way. Unauthorized

may impair the function and life of the implement.
• 
alongside the implement. Be certain only a properly
trained and physically able person will use the
machinery.
• Working with unfamiliar equipment can lead to

person other than yourself, or is loaned or rented, it is
the implement owner’s responsibility to make certain
that the operator, prior to using:
• Reads and understands the operator’s manuals.
• Is instructed in safe and proper use of the implement
• If the elderly are assisting with the work, their
physical limitations need to be recognized and
accommodated.



• Operators or maintenance personnel who are not
fully able to read and understand this manual should
not operate or work on the implement:
• Make certain that all operators and maintenance
personnel have complete understanding of the full
and exact contents of this manual and safety labeling.
• 

FULLY, in order to be able to operate safely and
knowledgeably.
• Review the implement and instructions regularly with
existing workers.

9

1. Inspect Wagon for shipping damage. If damage does
exist, do not use. Notify your dealer immediately to
have damaged parts replaced or repaired.
2. 
purchased your equipment. Follow the assembly
procedures as outlined in the assembly manual.
3. When not attached to the towing unit, block and chock
the wheels to prevent movement.
4. SMV) emblem has been
properly installed at rear of wagon.
5. Personal protection equipment (PPE) including hard
hat, safety glasses, safety shoes, and gloves are
recommended during assembly, installation, operation,



6. Ensure safety chain, straps, tires are not damaged
and in good condition.
7. Inspect all fasteners that they are not lose or missing.
Ensure fasteners and wheel bolts are torqued
according to the torque chart at the back of this
manual
8. If traveling at night, ensure provincial / state and local
laws / lighting requirements have been met.
9. Ensure that all applicable safety decals are installed
and legible.
10. Check alignment of wheels, realign the wheels if
needed.
11. 

1. NEVER allow helpers or bystanders under or near
header while mounting on header wagon.
2. Make sure that the load is fastened securely to the
wagon before moving.
3. Inspect all fastening devices, do not use if worn or
damaged.
4. Use a high strength hitch pin to hitch the implement to
towing unit,
5. Secure the hitch with the safety chain. Replace the

broken, stretched or otherwise damaged or deformed.
6. Make sure that everyone is clear before moving the
implement. NEVER position yourself between the
towing unit and the implement.
7. Do not permit riders while transporting this implement,
with or without a load.
8. Where possible, avoid operating near ditches,
embankments and holes.
9. Loading or unloading an unhitched implement, be sure
to properly block / chock the wheels to prevent the
implement from moving.
10. Check that wagon brakes are functioning properly (if
equipped)
11. Inspect rims for dents or damage, check wheel lugs
and tighten if required.
12. Ensure there is adequate lighting while working at
dusk or after sunset.

1. Good maintenance is your responsibility, follow the
maintenance schedule. Poor maintenance is an
invitation to trouble.
2. Follow good shop practices.
• Keep service area clean and dry.
• Be sure electrical outlets and tools are properly
grounded.
• 
3. Never work under or around the implement unless it is
blocked / chocked securely.
4. Use personal protection equipment (PPE) such as
eye, hand and hearing protectors.
5. 
󰀨
unit.
6. Ensure hardware is torqued according to the torque
chart at the back of this manual.

1. Store the safety chain by securing it around the
tongue
2. Store the unit in an area away from human activity.
3. Do not allow children to play on or around the stored
implement.
4. Store the unit in a dry, level area. Cover if stored
outside.
5. Ensure safety chain, straps, tires are not damaged
and in good condition before storing the wagon. Make
repairs now to be ready for the following season.
6. Chock wheels to prevent unintentional movement.

10

Ratchet straps are an important part of the header wagon,
󰀨
you, so it is important that they are used safely and
inspected for damage or wear each time they are used.
1. 
over abrasive surfaces.
2. When not in use protect the strap and store in a dry,
clean environment.
3. If the ratchet mechanism is damaged in any way, DO

possible.
4. NEVER use the strap for towing purposes.
5. NEVER use the strap for lifting, lowering, or

6. 
other than outlined in this manual.
7. Do not twist, kink or knot the ratchet strap.
8. 
alkali.
9. 


10. Be aware of using the ratchet strap with equipment
that has edges or surfaces that could damage the
ratchet strap, use corner/ edge protectors to protect
the strap from damage.
11. Do not run / drive over ratchet straps with a vehicle or
other equipment.
12. Ratchet straps that are used outdoors regularly should
generally be permanently removed from service within
a period of 2 to 4 years.
13. Keep the ratchet mechanism clean and lubricated.
14. Visible indications of deterioration can include the
following:
• Fading of webbing color.
• Uneven or disoriented surface yarn of the
webbing.
• Shortening of the ratchet strap length.
• Reduction in elasticity and strength of the
ratchet strap material due to an exposure
to sunlight, often evident by an accelerated
abrasive damage to the surface yarn of the
ratchet strap.
• 
evident by a fuzzy appearance of the web.
• 󰀨
particularly evident when ratchet straps are
exposed to outdoor conditions without being
used.
1. Do not tow loads more than 1.5 times the tractor / tow

tow vehicle can cause loss of control when braking.
Consider total weight: wagon and its load.
2. Stopping distance of towed loads increase with speed,

for the tow vehicle or are towed too fast can cause
loss of control. Consider total weight: wagon and its
load.
3. 
control and stability at all times do not exceed travel
speed rating of the components: Maximum 50 km/h
(30 mph).
4. When traveling on public roads, make certain your
implement meets local, provincial, state, and national
codes. In Canada, maximum road speed for all
agricultural equipment is 40 km/h (25 mph) and must
display a SMV sign. ()
5. Do not overload the wagon. Overloading the wagon is

implement.
6. Be sure all markers and SMV sign required by local
󰀩
7. Reduce speed when turning, crossing slopes and
rough, slick or muddy surfaces.
8. Be aware that four wheel steer wagon will react
󰀨
or backing up.
9. Ensure the correct size / grade hitch pin is used and
secured with a lynch pin.
10. Check tires before proceeding:
• 
• 
• 
• 
11. Just before transport, perform a circle check to ensure
everything is safe.
12. Lighting is not required for daytime transport, however


󰀩
atmospheric conditions.
13. Safety chain
• Do not allow the chain to drag, string the safety
chain thru the chain support at the clevis.
• Do Not use the any chain support as an attaching
point
• Secure chain on the tow vehicle at the towing attach
point.
• Do Not allow more slack than necessary for
articulation.
• Replace the safety chain if one or more links or end

or deformed.
