Indicator Lights
• Wash Cycle phase indicator lights
Once the wash cycle has been chosen and selected and has begun, the indicator lights switch on one by one to
indicate which phase of the cycle is currently in progress.
• Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator light will illuminate. If the selected function is not
compatible with the programmed wash cycle, the corresponding indicator light will flash and the function will
not be activated. If this is the case, the most recent selection will remain active.
• Door locked indicator light
If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally. To avoid
any damage, wait for the indicator light to switch off before you open the door.
Starting a wash cycle
1. Switch the washer-dryer on by pressing the ON/OFF button. All indicator lights will switch on for a few seconds,
then they will switch off and the START/PAUSE indicator light will pulse on and off
2. Load the laundry and close the door
3. Set the WASH CYCLE knob to the desired programme
4. Set the washing temperature
5. Set the drying cycle if necessary
6. Measure out the detergent and washing additives
7. Select the desired functions
8. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit up,
in green
To cancel the set wash cycle, pause the machine by pressing the START/PAUSE button and select a new cycle
9. At the end of the wash cycle the END indicator light will switch on. The DOOR LOCKED indicator light will switch
off, indicating that the door can be opened. Take out your laundry and leave the appliance door slightly open to
ensure the drum dries out completely.
10. Switch the washer dryer off by pressing the ON/OFF button
