Household Essentials 18411-1 User manual

Tilt-out Cabinet
Laundry Sorter
with Shutter Front
18411-1

A - 1pc
Cabinet Top Panel
C - 1pc
Left Cabinet Side Panel
F - 2pcs
Front Bin Panels J - 4pcs
Notched Bag Support
K - 4pcs
Bin Supports
L - 2pcs
Bin Base Panel
M - 2pcs
Back Panel
N - 2pcs
Bag
I - 4pcs
Bag Handles
G - 4pcs
Bin Side Panels
H - 2pcs
Bin Back Panels
E - 1pc
Right Cabinet Side Panel
D - 1pc
Center Cabinet Panel
B - 1pc
Cabinet Base Panel
Parts - Identify parts before assembling.

O - 2pcs
Knob
P - 23pcs Q - 52pcs R - 6pcs
T - 12pcs
Wood Dowel
X - 1pc
Long Metal
Dowel
Y - 2pc
Metal Dowel
V - 6pcs W - 4pcsS - 4pcs U - 6pcs
Cam Bolt
Please read the entire instruction booklet prior to assembling your
Tilt-out Cabinet Laundry Sorter. Check the parts and tools list below to ensure you have
everything to properly install your cabinet hamper. If you are missing parts please do not
return to place of purchase, call Household Essentials® at 800.922.5524/314.428.5657
and we will expedite replacement parts.
NOTE:
In order to prevent damage during assembly, it is recommended to assemble with at least
2 people.
For more information on the Tilt-out Cabinet Laundry Sorter
and its accessories, visit our website www.householdessential.com.

F
J
K
K
QQ
Q
Q
Diagram 1
1. Take 1 Front Panel (F) lay face down.
Attach 1 notched bag support (J) to
front Panel (F) using 2 screws (Q).
2. With the pre-drilled side holes facing out,
attach 2 bin supports (K) to Front Panel (F)
by using 6 screws (Q).
Diagram 4
6. Attached bin back panel (H) to side
panels using 8 screws (Q).
7. Attach knob (O) to front panel (F).
8. Repeat steps 1–7 for second laundry bin.
9. Set bins aside.
Diagram 3
4. Attach 1 side panel (G) to outside of (K)
with grooves aligned using 4 screws (Q).
Repeat on other side.
5. Place bin base panel (L) into the grove
and slide into place.
Diagram 2
3. Attach 1 notched bag support (J) to
inside of bin back panel (H) using 2
screws (Q).
Diagram 1
Diagram 2
Diagram 3
Diagram 4
Q Q
J
H
Assemble Laundry Bins (1 at a time):
O
QHQ
L
GG
K
F
QQQQ

Diagram 5
1. Insert 2 cam locks (V) into holes at top of cabinet side panels (C and E) and
center panel (D).
2. Place 2 wooden dowels (T) into each panel (C and E). Place dowel (Y) into panel (C and E).
3. Place 2 wooden dowels (T) into panel (D) and place long metal dowel (X) through
panel (D).
5. Place 1 metal pivot insert (W) in each panel (C and E) and 2 metal pivot insert (W) on
both sides of panel (D).
Diagram 5
Diagram 6
6. Insert 6 cam bolts (U) into the top (A).
NOTE: Turn the cam bolt screws until they
are tight, the shoulder should be against the
surface of the part.
Diagram 6
A
U
UU
U U
U
Assemble Cabinet
VX
D
C
W
W
WY
T
T
T
T
V
VY
E
W
T
T
V
V
V

B
R
R
D
Diagram 7
1. Using a hammer tap in 4 feet (S)
to bottom of base panel (B).
Diagram 8
2. Insert cabinet center panel (D) into base
panel (B) by lining up the wooden dowels and
push into place.
3. Secure the cabinet center panel (D) to
cabinet base (B) by using 2 screws (R) from
the under side of base panel (see diagram 8)
Make sure the metal pivot inserts (W) are at
the front of the cabinet. Rivet on base needs to
be in the back.
Diagram 9 and 10
4. Take left laundry bins and insert onto
metal pivot (W) on center cabinet panel (D)
5. Insert side panel (C) onto base (B) by lining
up wooden dowels and push into place,
securing laundry bin onto metal pivot (W) at
panel base. See diagram 9.
6. Secure side panel (C) to base panel
by using 2 screws (R).
7. Repeat steps 4-6 for the right laundry bin and
panel (E). See diagram 10.
8. Insert 6 wooden dowels (T) into the
top panels (C,D and E) as show on diagram 10.
Diagram 8
NOTE: Lay
on side. The
side of base
that has 2”
recessed
hole is front
of cabinet.
Rivet
Diagram 9 Diagram 10
C
D
G
RR
S
SSS
Diagram 7
T
E
C
R
R
T
T
T
TT

Diagram 11
9. Put Top (A) into place on cabinet frame.
Be sure to line up the cam bolts with
the cam locks and dowels with locating
holes. Edge with cutout faces back of bin.
10. Tilt left laundry bin forward so it rests
on wooden dowels and rotate the cam
locks to secure top to frame. Repeat
with right laundry bin.
Diagram 12
11. Put back board (M) on back of cabinet and
attached by using 23 screws (P).
Screw 3 middle screws last.
Diagram 13
12. Slide 2 bag handles (I) into 1 bag
(N) and repeat with second bag.
Screw 3 middle screws last.
Diagram 11
Diagram 12
Diagram 13
P
M M
E
I
I
N
N
N

Attach the unit to the wall with the Tipping Restraint Kit
hardware. Follow the instructions printed on restraint kit’s
bag to install.
Serious or fatal crushing injuries can occur from
furniture’s tipping over. To help prevent tipping:
•Avoid climbing on or hanging on product .
•Unless specifically designed to accommodate, do not set
TVs or other heavy objects on top of this product .
•Place heaviest items in the lowest position possible.
•Secure product to the wall with tipping-restraint.
The use of tipping restraints may only reduce, not
eliminate, the risk of tipping over.
WARNING
8/2018
©2018 HOUSEHOLD ESSENTIALS, LLC
Hazelwood, MO 63042
www.householdessential.com
Customer Service
1-800-922-5524 | 1-314-428-5657
[email protected]
Open Mon-Fri at 8:30 am CT.
Closed all national holidays.