Household Essentials 8046-1 User manual

5/2017
©2017 HOUSEHOLD ESSENTIALS, LLC
Hazelwood, MO 63042
www.householdessential.com
Not happy?
Happy?
Thank you for your order!
Wonderful! We are very glad.
Please share your experience with
us and others. It helps us know
what you like best!
Please give our St. Louis
customer service a call at
1-800-922-5524.
We are here to help.
Customer Service
1-800-922-5524 | 1-314-428-5657
[email protected]
Open Mon-Fri at 8:30 am CT.
Closed all national holidays.
We appreciate your business. Additional information on your product
may be available on our website.
• Review this product at
www.householdessential.com.
Search the item # from the home
page to find the product. Leave your
review under the review tab on the
product’s page!
• Follow us on Facebook and
Instagram!
• Missing parts?
• Having trouble with assembly?
8-Drawer Chest,
Black
8046-1

Parts Assembly
Attach the unit to the wall with the Tipping Restraint Kit
hardware. Follow the instructions printed on restraint kit’s
bag to install.
Serious or fatal crushing injuries can occur from
furniture’s tipping over. To help prevent tipping:
• Avoid climbing on or hanging on product.
• Unless specifically designed to accommodate, do not set
TVs or other heavy objects on top of this product.
• Place heaviest items in the lowest position possible.
• Secure product to the wall with tipping-restraint.
The use of tipping restraints may only reduce, not
eliminate, the risk of tipping over.
WARNING
1
2
Ax1
Laminate
Top
Bx1
Top Scroll
Frame
Cx1
Bottom
Shelf
Dx1
Top
Rail
Ex2
Lower
Rail
Fx4
Wide
Drawer
Gx4
Narrow
Drawer
Hx4
Wide
Bottom Panel
Ix4
Narrow
Bottom Panel
Jx2
Side
Frame
Kx20
Screw
Nx8
Handle
Lx2
Screws
Mx16
Screws
Ox16
Washers
1. Unfold drawers (G/F) and place bottom panel (I/H) into the bottom
of the drawers.
2. Align the handles (N) with the front of the drawers. Pass a screw
(M) through a washer (O) and into the handle. Use a Phillips screw
driver to tighten screw. Repeat for all handles.
3. Insert drawers into chest.
1. Lay 1 of the side panels (J) on its side and attach the laminate top (A), 1 upper (D), and 2 lower
shelf rails (E) and bottom shelf (C) using 10 screws (K), 2 screws in each.
2. Prop the remaining side panel (J) along the open end of the rails and attach it with
the remaining 10 screws (K).
3. Screw top scroll frame (B) into side frame (J) using 2 screws (L).
NOTE: Finger tighten screws until
fully assembled, unless instructed
to “tighten fully”.
NOTE: Screws and washers may
already be screwed into handles.
F/G
MO
N
H/I