Hoval TopTronic E Technical specifications

Brief operating instructions
TopTronic®E control module easy for heat generator and comfort ventilation
1
No. Icon Designation/function
1Heating circuit
Heating circuit selection – if there are
several
2Room temperature (current)
Setting the required room temperature
(page 2)
3 Active day program
Day program selection reg. room
temperature (pages 2 and 3)
4 Switching cycle
Display of the current heating times.
Setting in the main menu (page 3).
5 Active basic program
(heating)
6Information –
heat generator/ventilation
Display element – no operation
7 Alarm message display
Selection and display of alarm messag-
es. Only visible in the event of an alarm.
8 Information area
Operating elements/buttons are shown in white on a black background or in black on a
white background. Display elements, on the other hand, are shown in colour.
No. Icon Designation/function
9Outdoor temperature
(only with outdoor sensor)
Display element – no operation
10 Required air quantity
Can be overridden
Max. air humidity
11 Air quality (optional)
If air quality sensor(s) are installed, the interior
or interior and exterior air quality is displayed.
The air quality can have an impact on the
air quantity.
12 Main menu
Menu overview and processing of all functions
(page 4)
13 LED operating status
Green: operation
If the LED lights up red or orange, see item 7.
14 AQ
CV
Air quantity modulation
The set air quantity is modulated by the pre-
vailing ambient conditions. However, the air
quantity display remains at the set value.
113 7
5 6 12
4
3
2
9
10
8
11
Ventilation controlHeating control
14

2
Basic programs
(Holiday until, Standby, Week 1, etc.)
Only inuences the heating
Setting the room temperature
Only inuences the heating
Adjust the room temperature using (+/–) or by
entering directly (tap the value) and conrm
with OK.
Select room temperature.
Room temperature rises/falls.
Select required basic program.
Select basic program.
New basic program active.
New active basic program
Notice
Adapting the room temperature, changing the day programs and selecting the "Party until" and
"Absent until" programs is only possible in the Week 1 and Week 2 basic programs. For further
information about the TopTronic®E control module, see the Hoval operating instructions.

3
Party, Absent
Select active day program.
Adjust the desired duration and room tempera-
ture (+/–) or by entering directly (tap the value)
and conrm with OK.
Select day program.
Ventilation the same
as heating
Heating
Select the "Party" or "Absent".
Setting the air quantity
(and max. air humidity)
Adjust the air quantity and air humidity using
(+/–) or by entering directly (tap the value) and
conrm with OK.
Basic and day programs are set in the
same way as with the heating.
Tap the screen.
The air quantity rises/falls.
The air quantity and limit value for max. air hu-
midity rise/fall to the required value.

4
Main menu overview
Page 1/3 Page 2/3 Page 3/3
Emission (for heating technician only)
- Selection heat generator - Remaining run time - Output limitation - Information area
Analysis - Selection heat generator,
heating circuit, hot water - Selection duration - Diagram display
Visualisation - For solar collector systems Heating circuits
- Desired room temperature - Basic program selection - Day program selection - Room temperature switching cycles
Hot water - Desired DHW temperature
- Basic program selection - Day program selection - Hot water switching cycles
Programs - Selection heating circuit/hot water
- Detailed selection heating circuit/hot water - Adapting week programs - Adapting day programs
System - Display of the next due
maintenance/cleaning/service
Info - Information area selection
- Detailed selection heat generator, heating circuit, hot
water, solar, etc.
- Information area
User level (for heating technician only)
- User level PIN entry
Service For the heating technician only Manual oper- ating mode (for heating technician only)
- Selection heat generator/ heating circuit - Detailed selection - Cooling operation/OFF/heating operation - Information
Presentation - Language
- Colour scheme - Start screen - Backlighting
- Duration until standby - Display until standby - Authorisation
Information - Information area selection
- Detailed selection heat genera-
tor, heating circuit, hot water
- Information area
- Selection heating circuit - Selection joint operation
Active heating
circuit
- Room temperature setting - Day program selection - Display active switching cycles
Room tempera-
ture/day program
- Basic program selection Basic program
Commis- sioning
For the heating technician only
Update For the heating technician only Power station Inuence of weather forecast on
heating. The function is only active with remote connection.
Ventilation Ventilation settings
4 216 255 / 01 - 07/18 EN
Air quantity/ max. air humidity
- Air quantity setting - Air humidity setting - Day program selection