Hover-1 EAGLE User manual

NEED HELP?
For UK Customer Service
Please Contact
[phone] /
[e-mail]
For other countries, scan QR
Code for more information
** IMPORTANT **
Retain this card, a copy of your receipt
and your 13 digit serial number
for your records
STOP

Always wear a properly
tted helmet that
complies with CPSC or CE
safety standards when you
ride your scooter.
Correct Fitting:
Make sure your
helmet covers your
forehead.
Quick Start Guide
What’s In The Box?
Hover-1 Eagle • Wall Charger • Operation Manual/Quick Start Guide • Bell + Wrench
Charging Your Eagle
Operation Of Your Eagle
Make sure the device is fully charged before the rst initial use. The Eagle is
fully charged when the light on the charger itself, turns from red to green as
shown below.
Attach the handle bars by placing them into the appropriate sockets
and twist them in the correct direction.
Fully charge your Eagle for up to 5 hours before using it for the first time.
To fold/unfold your scooter, press the blue button on the release lever,
then pull the lever. Raise or lower the steering column and lock into
place.
Before turning on your Eagle, ride it like a normal kick scooter to get
comfortable with the device before using it with the motor.
When comfortable riding the scooter, power it on. You must first kick off
the ground and then press the throttle for the motor to start. A minimum
speed of 1.8mph (3 km/h) must be reached before you can use the
throttle. To slow down the scooter, press the electric brake.
FULLY
CHARGED
NOT FULLY
CHARGED
EAGLE
You must first kick off the ground for the motor to start.
1
2
3
4
5