Hover-1 ALL-STAR 2.0 User manual

ALL-STAR 2.0
OPERATION MANUAL
DSA-STR2

HELMETS
SAVE
LIVES!
Always wear a properly tted helmet that
complies with CPSC or CE safety standards
when you ride your scooter.
Correct Fitting:
Make sure your helmet
covers your forehead.
Incorrect Fitting:
Forehead is exposed
and vulnerable to
serious injury.

PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in
the user manual can lead to damage to your ALL-STAR 2.0, other
property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 ALL-STAR 2.0 Electric Scooter.
Please read all instructions carefully before using and retain this
manual for future use and reference.
This manual applies to the ALL-STAR 2.0 Electric Scooter.
• In order to avoid dangers that are caused by collisions, falls, and
loss of control, please learn how to ride the ALL-STAR 2.0 safely.
• You can learn operating skills by reading the product manual and
watching videos.
• This manual includes all operating instructions and precautions,
and users must read it carefully and follow the instructions.
• Hover-1 can not be held liable for damage or injury caused by
failure to understand and follow the warnings and instructions in this
manual.
ATTENTION
1. Use only the supplied charger with this scooter.
Charger Manufacturer: DONGGUAN GREEN POWER ONE CO., LTD
Model: GA301-2940800US
2. The operating temperature range of the ALL-STAR 2.0 is 32-104° F
(0-40° C).
3. Do not ride on icy or slippery surfaces.
4. Read the user manual and warning labels before riding.
5. Store the ALL-STAR 2.0 in a dry, ventilated environment.
6. When transporting the ALL-STAR 2.0, avoid violent crashes or impact.
LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside
the ALL-STAR 2.0 scooter, increasing internal resistance. At the
same time, in low temperatures, the discharge capacity and the
capacity itself of the battery will be significantly decreased.
Use caution when riding the ALL-STAR 2.0 in cold temperatures
(below 40 degrees F).
Doing so may increase the risk of mechanical failures of the
scooter, which may lead to damage to your ALL-STAR 2.0, other
property damage, serious bodily injury and even death.
SAFETY INSTRUCTIONS
• Keep the ALL-STAR 2.0 away from heat sources, direct sunlight,
humidity, water and any other liquids.
• Do not operate the ALL-STAR 2.0 if it has been exposed to water,
moisture or any other liquids to prevent against electric shock,
explosion and/or injury to yourself and damage to the ALL-STAR
2.0.
• Do not use the ALL-STAR 2.0 if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs voids the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in
any way.
• Keep the ALL-STAR 2.0 free from dust, lint, etc.
• Do not use this ALL-STAR 2.0 for anything other than its intended
use or purpose. Doing so may damage the ALL-STAR 2.0 or lead to
property damage, injury or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to
excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar
articles to come in contact with moving parts, wheels or
drivetrain, while the engine is running.
1
WARNING!

PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in
the user manual can lead to damage to your ALL-STAR 2.0, other
property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 ALL-STAR 2.0 Electric Scooter.
Please read all instructions carefully before using and retain this
manual for future use and reference.
This manual applies to the ALL-STAR 2.0 Electric Scooter.
• In order to avoid dangers that are caused by collisions, falls, and
loss of control, please learn how to ride the ALL-STAR 2.0 safely.
• You can learn operating skills by reading the product manual and
watching videos.
• This manual includes all operating instructions and precautions,
and users must read it carefully and follow the instructions.
• Hover-1 can not be held liable for damage or injury caused by
failure to understand and follow the warnings and instructions in this
manual.
ATTENTION
1. Use only the supplied charger with this scooter.
Charger Manufacturer: DONGGUAN GREEN POWER ONE CO., LTD
Model: GA301-2940800US
2. The operating temperature range of the ALL-STAR 2.0 is 32-104° F
(0-40° C).
3. Do not ride on icy or slippery surfaces.
4. Read the user manual and warning labels before riding.
5. Store the ALL-STAR 2.0 in a dry, ventilated environment.
6. When transporting the ALL-STAR 2.0, avoid violent crashes or impact.
LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside
the ALL-STAR 2.0 scooter, increasing internal resistance. At the
same time, in low temperatures, the discharge capacity and the
capacity itself of the battery will be significantly decreased.
Use caution when riding the ALL-STAR 2.0 in cold temperatures
(below 40 degrees F).
Doing so may increase the risk of mechanical failures of the
scooter, which may lead to damage to your ALL-STAR 2.0, other
property damage, serious bodily injury and even death.
SAFETY INSTRUCTIONS
• Keep the ALL-STAR 2.0 away from heat sources, direct sunlight,
humidity, water and any other liquids.
• Do not operate the ALL-STAR 2.0 if it has been exposed to water,
moisture or any other liquids to prevent against electric shock,
explosion and/or injury to yourself and damage to the ALL-STAR
2.0.
• Do not use the ALL-STAR 2.0 if it has been dropped or damaged in
any way.
• Repairs to electrical equipment should only be performed by
the manufacturer. Improper repairs voids the warranty and may
place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in
any way.
• Keep the ALL-STAR 2.0 free from dust, lint, etc.
• Do not use this ALL-STAR 2.0 for anything other than its intended
use or purpose. Doing so may damage the ALL-STAR 2.0 or lead to
property damage, injury or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to
excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar
articles to come in contact with moving parts, wheels or
drivetrain, while the engine is running.
2

• Do not operate or allow others to operate the ALL-STAR 2.0 until
the user understands all instructions, warnings and safety features
described in this manual.
• Check with your doctor if you have a medical condition that
could affect your ability to use the ALL-STAR 2.0.
• Persons with head, back or neck ailments or prior surgeries to
those areas of the body are not recommended to use the
ALL-STAR 2.0.
• Do not operate if you are pregnant, have a heart condition, or
have both.
• Persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical or mental
capabilities to recognize, understand and perform all of the
safety instructions and to be able to assume the hazards inherent
in unit use, should not use the ALL-STAR 2.0.
In this manual, the above symbol with the word “NOTES” indicates
instructions or relevant facts the user should remember prior to using
the device.
In this manual, the above symbol with the word “CAUTION”
indicates a hazardous situation which, if not avoided, can cause
minor or moderate injury.
In this manual, the above symbol with the word “WARNING”
indicates a hazardous situation which, if not avoided, can cause
death or serious injury.
Please keep the serial number on file for warranty claims as well as
proof of purchase.
WARNING: Prolonged Exposure to UV Rays, Rain and the Elements
May Damage the Enclosure Materials.
Store Indoors When Not in Use.
3
WARNING!
WARNING!
SERIAL NUMBER
CAUTION!
NOTES:

OPERATING PRINCIPALS
The ALL-STAR 2.0 uses digital All-STAR 2.0nic gyroscopes and
acceleration sensors to control balance and motion, depending on
the user's center of gravity. The ALL-STAR 2.0 also uses a control
system to drive the motors that are located within the wheels. The
ALL-STAR 2.0 has a built-in inertia dynamic stabilization system that
can help assist with balance when moving forward and backwards,
but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model: Hover-1™ALL-STAR 2.0 (DSA-STR2)
Net Weight: 15.43 lbs (7 kg)
Load: 44-220 lbs (20-100 kg)
Max Speed: Up to 7 mph (11.3 km/h)
Max Distance Range: Up to 7 mph (11.3 km/h)
Max Incline Angle: 10°
Minimum Turning Radius: 0°
Charge Time: Up to 5 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2V
Battery Capacity: 4.0Ah
Power Requirement: AC 100-240V, 50/60Hz
Ground Clearance: 1.18 Inches (3 cm)
Platform Height: 4.72 Inches (12 cm)
Tire Type: Non-Pneumatic Solid Tires
BT ID: D042258
FCC ID: 2AANZSTR2
[phone]
The Hover-1 ALL-STAR 2.0 is a personal transporter. Our technology
and production processes are developed with strict testing for each
ALL-STAR 2.0 scooter. Operating the ALL-STAR 2.0 without following
the contents of this manual may lead to damage to your ALL-STAR
2.0 or bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your ALL-STAR 2.0. Please read it
thoroughly before riding your ALL-STAR 2.0.
PACKAGE CONTENTS
• Hover-1 ALL-STAR 2.0 Electric Scooter
• Wall Charger
• Operation Manual
FEATURES/PARTS
1. Fender 5. Tire
2. Left Foot Mat 6. Power Button
3. Battery Indicator 7. Charge Port
4. Right Foot Mat
4
1 1
55
67
2
3
4
INTRODUCTION

OPERATING PRINCIPALS
The ALL-STAR 2.0 uses digital All-STAR 2.0nic gyroscopes and
acceleration sensors to control balance and motion, depending on
the user's center of gravity. The ALL-STAR 2.0 also uses a control
system to drive the motors that are located within the wheels. The
ALL-STAR 2.0 has a built-in inertia dynamic stabilization system that
can help assist with balance when moving forward and backwards,
but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model: Hover-1™ALL-STAR 2.0 (DSA-STR2)
Net Weight: 15.43 lbs (7 kg)
Load: 44-220 lbs (20-100 kg)
Max Speed: Up to 7 mph (11.3 km/h)
Max Distance Range: Up to 7 mph (11.3 km/h)
Max Incline Angle: 10°
Minimum Turning Radius: 0°
Charge Time: Up to 5 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2V
Battery Capacity: 4.0Ah
Power Requirement: AC 100-240V, 50/60Hz
Ground Clearance: 1.18 Inches (3 cm)
Platform Height: 4.72 Inches (12 cm)
Tire Type: Non-Pneumatic Solid Tires
BT ID: D042258
FCC ID: 2AANZSTR2
[phone]
The Hover-1 ALL-STAR 2.0 is a personal transporter. Our technology
and production processes are developed with strict testing for each
ALL-STAR 2.0 scooter. Operating the ALL-STAR 2.0 without following
the contents of this manual may lead to damage to your ALL-STAR
2.0 or bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your ALL-STAR 2.0. Please read it
thoroughly before riding your ALL-STAR 2.0.
PACKAGE CONTENTS
• Hover-1 ALL-STAR 2.0 Electric Scooter
• Wall Charger
• Operation Manual
FEATURES/PARTS
1. Fender 5. Tire
2. Left Foot Mat 6. Power Button
3. Battery Indicator 7. Charge Port
4. Right Foot Mat
5
SPECIFICATIONS
WARNING
Any ALL-STAR 2.0 that does not work properly
can cause you to lose control and fall.
Inspect the entire ALL-STAR 2.0 thoroughly
before every ride, and do not ride it until any
problems have been corrected.

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
TURNING YOUR DEVICE ON/OFF
Power On: Take your ALL-STAR 2.0 out of the box and place it flat on
the floor. Press the power button (located on the rear of your
ALL-STAR 2.0) once. Check the LED indicator (located in the center of
your ALL-STAR 2.0). The battery indicator light should be lit, indicating
the ALL-STAR 2.0 is powered on.
Power Off: Press the power button once.
MAT SENSOR
There are four sensors under the foot mats on your ALL-STAR 2.0.
When riding the scooter, you must ensure you are stepping on the
foot mats. Do not step or stand on any other area of your scooter.
The ALL-STAR 2.0 may vibrate or spin in one direction, if weight and
pressure are applied to only one foot mat.
BATTERY INDICATOR
The display board is located in the middle of the ALL-STAR 2.0.
• Green LED Light indicates the hoverboard is fully charged.
• Red flashing LED light and beeping indicates low battery.
• Yellow light indicates the board is charging.
When the LED light turns red, please recharge the ALL-STAR 2.0.
RUNNING INDICATOR
When the operator triggers the foot mats, the Running Indicator LED
will light up, which means that the system enters the running state.
When the system has an error during operation, the running LED light
will turn red (for more details see SAFETY ALERTS).
6
CONTROLS AND DISPLAY

7
The All-STAR 2.0 has a powerful built-in wireless speakers so you can
play your music while riding.
PAIRING THE SPEAKER
1) Turn on your All-STAR 2.0 and the speakers will “Ping” to announce
that it’s waiting for a Bluetooth®connection. This will indicate your
All-STAR 2.0 speaker is now in pairing mode.
2) Place the All-STAR 2.0 and the Bluetooth®device to which you
would like to pair it within the operating distance. We recommend
keeping the two devices no further than 3 feet apart during pairing.
3) Ensure Bluetooth®is enabled on your phone or music device. Refer
to manufacturer’s instructions for how to enable Bluetooth®on your
device.
4) Once you have activated Bluetooth®on your device, select the
option “DSA-STR2” from the list of available Bluetooth®devices.
5) If required, enter the PIN code "000000" and confirm the entry.
6) The All-STAR 2.0 will say “Paired” when successfully paired.
7) Please note, pairing mode on the Hover-1 will last for two minutes.
If no devices are paired after two minutes, the All-STAR 2.0 speaker
will automatically return to standby mode.
8) If pairing is unsuccessful, turn off the All-STAR 2.0 first and re-pair
following the aforementioned steps.
9) If your smart phone is out of range, or the battery is low on your
All-STAR 2.0, your speaker may disconnect from your smart device,
and the All-STAR 2.0 will say “Disconnected.” To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the All-STAR 2.0 speaker with a device,
the speaker will remember this device and will pair automatically
when the device’s Bluetooth®is activated and in range. You do not
need to re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. You can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the All-STAR 2.0 Bluetooth speaker is paired to your device, you
can stream music wirelessly through it. Only one speaker will play
music as the other speaker is strictly for safety alerts from your Hover-1.
Select the track you wish to listen to on your device to listen via the
speaker. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please
refer to your device’s user manual.
BLUETOOTH SPEAKER

It is important that you fully understand all elements of your ALL-STAR
2.0. If these elements are not used correctly, you will not have full
control of your ALL-STAR 2.0. Before you ride, learn the functions of
the various mechanisms on your scooter.
Practice using these elements of your ALL-STAR 2.0 at slower speeds
in a flat, open area before taking the ALL-STAR 2.0 out in public
areas.
PRE-RIDE CHECKLIST
Ensure that your ALL-STAR 2.0 is in proper working order each and
every time you ride. If a part of the scooter does not function
correctly, please contact our Customer Support Center.
• Ensure the battery is fully charged before riding your scooter.
• Ensure that the screws on the front and back tires are locked firmly
before each ride.
• Please wear all appropriate safety and protective gear as
previously mentioned in the User Manual before operating your
ALL-STAR 2.0.
• Make sure to wear comfortable clothes and flat closed-toe shoes
when operating your ALL-STAR 2.0.
• Please carefully read the User Manual, which will assist in
explaining the basic working principles and provide tips on how to
best enjoy your experience.
8
BEFORE RIDING
WARNING
Any ALL-STAR 2.0 that does not work
properly can cause you to lose control
and fall. Do not ride a ALL-STAR 2.0 with
a part that is damaged; replace the
damaged part before riding.