HOZAN H-251-230 User manual

06.10
H-251-230
HEATER
for H-250-230/
H-252-230
ヒーター（Ｈ-２５０-２３０/Ｈ-２５２-２３０用）
ＭＡＤＥ ＩＮ ＪＡＰＡＮ

Precautions
 Caution
A new heater smokes when first use, but
this is not a trouble. The smoke will stop
thereafter.
1.
2. Before replacing the heater, switch off and
allow to cool.
Replacing heater
Unscrew the handle set screw and slide the handle
back.
1
Loosen the nuts which connects the power cords with
the lead wires of the heater, and reassemble them.
2
Unscrew the tip set screw and the heater set screw
to remove the tip and the heater.
3
The heater leads and
the power cords must be
set on the opposite
surface of the terminal.
Completion
Reset the new heater and assemble the soldering
iron as it was before.
4
Heater set screw
Terminal
Handle set screw
Tip Heater
Tip set screw
Nuts
Nut
Power source
Spring washer
Nut
From heater
Screw
Terminal