HP 562FLR-SFP+ User instructions

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
Overview
Page 1
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
The HPE Ethernet 10Gb 2-port 562FLR-SFP+ adapter, featuring the next generation of 10Gb Ethernet integration offering a single
chip solution on a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use
with HPE ProLiant Gen9 Rack and Scale-Out servers.
The HPE 562FLR dual-port design is ideal for high performance computing, server virtualization, security, server consolidation, and
other applications requiring highest throughput. The total aggregate throughput of 20Gb meets the needs for customers desiring
highest bandwidth.
The HPE 562FLR supports SR-IOV and enterprise class features such as Receive Side Scaling (RSS), Jumbo frames, PXE boot,
Checksum and segmentation offload, and time stamping (IEEE 1588) along with virtualization features such as VMware NetQueue,
Microsoft VMQ and Intel Virtualization Technology for Connectivity (VT-c).
Models
HP
E Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
727054-
B21
Kit contents
•HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
•Quick install card
•Product warranty statement

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Compatibility
Page
2
Servers ProLiant DL (rack-optimized):
•HPE ProLiant DL120 Gen9
•HPE ProLiant DL160 Gen9
•HPE ProLiant DL180 Gen9
•HPE ProLiant DL360 Gen9
•HPE ProLiant DL380 Gen9
•HPE ProLiant DL560 Gen9
•HPE ProLiant DL580 Gen9
Density Optimized
•HPE Apollo 2000 Gen9
•HPE Apollo 4000 Gen9
•HPE Apollo 6000 Gen9
NOTE: This is a list of supported servers. Some may be discontinued.

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Standard Features
Page
3
Product Features •Dual-port 10GbE FlexibleLOM that provides the flexibility to meet growing infrastructure needs.
Industry-leading throughput and latency performance
•Up to 40Gb/s bi-directional near line rate throughput
•Supports SR-IOV (requires server FW, SW and OS support)
•Hardware acceleration and offloads for stateless TCP/IP
•Support for Preboot eXecution Environment (PXE)
•Supports Wake-on-LAN (at 1 Gb)
NOTE: Wake-on-LAN is supported only on Port 1 from system power state S5.
•Improved small packet performance
•Integrated PHY and MAC
Dual-
port 10 Gigabit
Ethernet
Throughput
The HPE 562FLR FlexibleLOM delivers 20Gbps full duplex Ethernet transfer rate per port (40 Gbps
aggregate full duplex), providing the network performance needed to improve response times and alleviate
bottlenecks that impact performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for
high performance computing, database clusters, and more.
Jumbo Frames The HPE 562FLR FlexibleLOM supports jumbo frames (also known as extended frames), permitting up to a
9.5K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a
standard 1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput
performance and greater CPU utilization. These attributes are particularly useful for database transfer and
tape backup operations.
802.1Q VLANs IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 562FLR
FlexibleLOM to be separated into multiple virtual NICs for added network segmentation and enhanced
security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast
traffic to within the same VLAN domain also improves performance.
Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to
share single PCIe resources. The HPE 562FLR-SFP+ supports SR-IOV, and requires Firmware, Software and
OS support.
MSI and MSI-X MSI and MSI-X Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers
by balancing interrupts between CPUs/cores load.
TCP/IP Stateless
Offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Standar
d Features
Page 4
FlexibleLOM slot
Compatibility
Compatible with HPE FlexibleLOM slot for select HPE ProLiant Gen9 Rack and Scale-Out servers.
Network Adapter
Teaming
The HPE 562FLR FlexibleLOM support for NIC teaming helps IT administrators increase network fault
tolerance and increased network bandwidth, The team of adapters can work together as a single virtual
adapter. The HPE 562FLR provides support for several different types of teaming enabling IT administrators
to optimize availability, improve performance and help reduce costs.
Network Management
Management
Support
The HPE 562FLR FlexibleLOM can be administered from HPE Systems Insight Manager (SIM). The adapters
can be managed individually or in teams, providing SNMP based statistics for reporting purposes. The HPE
562FLR adapter can also be managed by other applications with SNMP support.
Server Integration The HPE 562FLR FlexibleLOM is a validated, tested, and qualified solution that is optimized for HPE ProLiant
servers. Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full
suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems
Insight Manager that simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other venders and
provides users with a single point of contact for both their servers and their network adapters.
Configuration
Utilities
Each HPE 562FLR ships with a suite of operating system-tailored configuration utilities that allow the user to
enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft
Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows
environment allow for unattended OS installations.
LED Indicators The colored LEDs on each port of the HPE 562FLR adapter indicate link status and link activity.
Preboot Execution
Environment (PXE)
PXE allows the server to boot over the network and download software residing in the network. The HPE
562FLR supports PXE.
HPE Sea of Sensors
3D
Support for HPE's Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity -
heat - across the server. When temperatures get too high, sensors can kick on fans and make other
adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on at one
time to a new system where only one kicks on - the one in proximity of the area that started heating up - thus
reducing the amount of energy used for cooling.
Active Health
System
Supports HPE Active Health System monitors and records changes in the server hardware and configuration
enabling customers to have accurate information that will assist in diagnosing problems and delivering rapid
resolution when server failures occur.

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Standar
d Features
Page 5
Warranty Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year,
limited warranty).
Minimum: One year limited warranty.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
.

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Service and Support
Page
6
Service and Support
HPE Technology Services
HPE Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability, and avoid downtime.
Protect your business beyond warranty with HPE Care Pack Services
When you buy HPE Options, it's also a good time to think about what level of service you may need. HPE
Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
HPE Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industry-
standard servers and software. You can choose the type and level of service that is most suitable for your
business needs. New to this portfolio is HPE Collaborative Support. If you are running business critical
environments, Hewlett Packard Enterprise offers Proactive Care or Critical Advantage. These services help
you deliver high levels of application availability through proactive service management and advanced
technical response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, Hewlett Packard Enterprise can work with you to tailor a service solution
for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product
Recommended
Services
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an Hewlett Packard Enterprise Authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
OR
3-Year HPE 24x7 4 hour Response, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and
basic software problem diagnosis, fault isolation, and resolution if available to Hewlett Packard Enterprise. If
the problem is with HPE HW, the representative will arrive on site any time and day of the year to begin
hardware maintenance service within 4 hours of the service request being logged. In case, the issue is with
Hewlett Packard Enterprise or supported third-party software product and cannot be resolved by applying
known fixes, Hewlett Packard Enterprise will contact the third-party vendor and create a problem incident on
your behalf.
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Service and Support
Page 7
Related HPE Care Pack Services to enhance your HPE product experience
Related Services
3-Year HPE 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue end
to end until resolved, delivering a single point of contact for you
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-2140ENW.pdf
OR
3-Year HPE 6-hour Onsite Call-to-Repair, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to
return the hardware in operating condition within 6 hours of the initial service request to the HPE Global
Solution Center, and basic software problem diagnosis, fault isolation, and resolution if available to Hewlett
Packard Enterprise. In case, the issue is with Hewlett Packard Enterprise or supported third-party software
product and cannot be resolved by applying known fixes, Hewlett Packard Enterprise will contact the third-
party vendor and create a problem incident on your behalf.
HPE Proactive Select Service
Provides a flexible way to purchase Hewlett Packard Enterprise best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN.pdf
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HPE Support Center
Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with Hewlett Packard Enterprise experts,
access support resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with an Hewlett
Packard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part of this
service; standard warranty terms and conditions apply. Parts and components that have exceeded their
maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's
operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Warranty / Service
For ProLiant servers and storage systems, this service covers HPE-
branded hardware options qualified for the

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Service and Support
Page 8
Coverage server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to
22” and tower UPS products; these items will be covered at the same service level and for the same coverage
period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been
exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced
by Hewlett Packard Enterprise due to malfunction. It does not apply to any exchange of Disk or SSD/Flash
Drives that have not failed. SSD/Flash Drives that are specified by Hewlett Packard Enterprise as consumable
parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in
the manufacturer’s operating manual or the technical data sheet are not eligible for the defective media
retention service feature option.
For more
information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant
or
http://www.hp.com/services/bladesystem

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Related Options
Page
9
Direct Attach Cable
HP BladeSystem c
-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable 487649-
B21
HP BladeSystem c
-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable 487652-
B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
487655-B21
HP BladeSystem c
-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable 537963-
B21
NOTE:
Direct Attach Cable (DAC) must be purchased separately for copper
environments.
Fiber Optic Modules
HP BladeSystem c
-Class 10Gb SFP+ SR Transceiver
NOTE:
Fiber transceivers and cables must be purchased separately for fiber-optic
environments.
455883-
B21
HP BladeSystem c-Class Virtual Connect 1G SFP SX Transceiver
453151-B21
HP BladeSystem c
-Class 10Gb SFP+ LR Transceiver
455886-
B21
Additional
Supported
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
Fiber Optic Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi
-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi
-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi
-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi
-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
NOTE:
Fiber transceivers and cables must be purchased separately for fiber-optic
environme
nts.
NOTE:
For additional information on 10Gb cable specifications go to:
http://www.HewlettPackardEnterprise.com/rnd/pdfs/10gig_cabling_technical_brie
f.pdf
Cables
(Plug into
HPN5900)
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Additional
Supported Cables
(Plug into
HPN6600)
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
H
P X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
Gigabit Server
Adapters
HP Ethernet 1Gb 4-port 331T Adapter
647594-B21
HP Ethernet 1Gb 2
-port 332T Adapter 615732-
B21
HP Ethernet 1Gb 2
-port 361T Adapter
652497-
B21

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Related Options
Page 10
10 Gigabit Server
Adapters
NOTE:
A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
HP Ethernet 10Gb 2
-port 530SFP Adapter 652503-
B21
HP Ethernet 10Gb 2-port 530T Adapter
656596-B21
HP Ethernet 10Gb 2
-port 560SFP+ Adapter 665249-
B21
HP Ethernet 10Gb 2
-port 561T Adapter 716591-
B21
HP Ethernet 10Gb 2
-port 570SFP+ Adapter
718904-
B21
FlexibleLOM
Adapters
Ethernet Adapters
HP Ethernet 1Gb 4
-port 331FLR Adapter 629135-
B21
HP Ethernet 1Gb 4
-port 366FLR Adapter 665240-
B21
HP
Ethernet 10Gb 2-port 530FLR-SFP+ Adapter 647581-
B21
HP Ethernet 10Gb 2
-port 561FLR-T Adapter 700699-
B21
HP Ethernet 10Gb 2
-port 570FLR-SFP+ Adapter
717491-
B21
FlexFabric Adapters
HP FlexFabric 10Gb 2
-port 533FLR-T Adapter 700759-
B21
HP FlexFab
ric 10Gb 2-port 534FLR-SFP+ Adapter 700751-
B21
HP FlexFabric 10Gb 2
-port 554FLR-SFP+ Adapter 629142-
B21
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Technical Specifications
Page
11
General
Specifications
Network Processor
Intel®
X710 Controller
Data Rate
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical
bandwidth.
Bus Type
PCI Express v
3.0 (Gen 3) x8 (FlexibleLOM slot)
Form Factor
FlexibleLOM
IEEE Compliance
802.3, 802.1ab, 802.3x, 802.3ad, 802.1p/ 802.1q, 802.3ae, 802.1Qau
Power and
Environmental
Specifications
Operating
Temperature
32° to 131° F (0° to 55° C)
Humidity
10% to 90% non-condensing
Power
<12W
Emissions
USA: FCC Part 15 Class A; Canada: ICES=
--3, Issue 4; Japan: VCCI V3 (2010.04) Class A;
International: EN55022:2006 + A1:2007 Class A; International:
EN55024:1998+A1:2011+A2; EN61000
-3-2:2006, EN61000-3-3:2008; Taiwan: BSMI,
CNS13438 (2006) Cla
ss A; Australia/New Zealand (AS/NZS): EN55022:2006+A12007
class A; Korea: KN22 Class A, KN24
Safety
6 of 6
Other
UL Mark (USA and Canada)
CE Mark
EN 60590
Operating System
Support
Microsoft Windows Server 2008, Server 2008R2, Server 2012 and HPC Server 2008, 32 and 64-bit
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux 5.x and 6.0
SLES 10 and 11
VMware 4.0 and 4.1
VMware ESX/ESXi 4.1 and ESXi 5.0
Solaris 10
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
BladeSystem Server Linux matrix:
http://h18004.www1.hp.com/products/servers/linux/hplinuxcert.html
Environment-
friendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise
offers end-of-life Hewlett Packard Enterprise product
return
, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to:
http://www.hp.com/go/green. To recycle your product,
please go to:
http://www.hp.com/go/green or contact your nearest Hewlett Packard
Enterprise
sales office. Products returned to Hewlett Packard Enterprise will be
recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Technical Specifications
Page 12
(product disas
sembly instructions) is posted on the Hewlett Packard Enterprise web
site at:
http://www.hp.com/go/green. These instructions may be used by recyclers
and other WEEE treatment facilities as well as
HEWLETT PACKARD ENTERPRISE
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.

QuickSpecs
HPE Ethernet 10Gb 2-port 562FLR-
SFP+ Adapter
Summary of Changes
Page
13
Date
Version History
Action
Description of Change
06-May-2016 From Version 1 to 2 Changed Overview and Related Options sections were updated.
31-March-2016
Version 1
Created
New QuickSpecs
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
su
bject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additio
nal warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04605518
- 15241 - Worldwide - V2 - 06-May-2016