HP ProCurve J9169A User manual

HP Warranty Information
Dual-Band Narrow Beam Width
3x3 MIMO Sector Antenna J9169A
Description
The ProCurve J9169A is a dual-band, narrow beam width
directional sector antenna for use in 802.11n MIMO
applications. Enclosed in a compact, low-profile radome,
the antenna is mounted to a rugged articulating mount.
The mount can be affixed to a mast or anchored directly
to a vertical surface. Each of the three MIMO antenna
elements are connected to the WLAN Access Point via
low loss, plenum-rated, coax pigtails. The radiation
patterns are uniform and symmetrical, providing high-
level signal density into defined coverage zones. This
antenna will greatly enhance the performance of 802.11n
systems. The dual-band frequency coverage means that a
single type of antenna can be deployed with any MIMO
radio in the 2.4-2.5 GHz and 5.1-5.9 GHz bands.
Safety
Specifications J9169A
Frequency (MHz): 2400 - 2500 & 5150 - 5875
Gain dBi ( w/34” cable): 8.0 dBi @ 2450 MHz
10.7 dBi @ 5500 MHz
Maximum VSWR: 2.0 : 1
3 dB Beamwidth – Azimuth: 75°@ 2.45 GHz /55°@ 5.5 GHz
Polarization : Linear, 2 Vertical, 1 Horizontal
Maximum Input Power: 1 Watt
Cable Length in.(mm): 34” (860) Plenum rated
Mechanical Size in. (mm): 10.2”x 10.2”x 1.3”
(259.1 x 259.1 x 33.5)
Weight: 1.8 kg
Antenna Connection: Reverse SMA (3x)
Radome: Polycarbonate
Mount Style: Articulating for Mast / Wall
See the warranty notice included with this product. A copy of the
specific warranty terms applicable to your ProCurve products and
replacement parts can be obtained from your HP Sales and Service
Office or authorized dealer.
Support
Hewlett-Packard offers support 24 hours a day, seven days a week
through the use of a number of automated electronic services.
You can get up-to-date support information from the ProCurve Web
site: www.procurve.com.
Additionally, your HP-authorized network reseller can provide you
with assistance, both with services that they offer and with services
offered by HP ProCurve.
Part Number: 5992-5001
*5992-5001*
The ProCurve J9169A and all associated equipment should
be installed in accordance with applicable local and
national electric code guidelines to ensure safe operation.
Before connecting your external antenna to a ProCurve
Wireless Access Point, please read the instructions in your
access point manuals. Be sure that the access point's
power levels are set to meet the regulatory requirements in
your area. For antenna RF power setting limits by
country/region, visit www.procurve.com/manuals.
Important Notice: Please read all instructions carefully
before attempting to install and use this product.
Printed in USA
October 2008
3 dB Beamwidth – Elevation: 70°@ 2.45 GHz /60°@ 5.5 GHz
© Copyright 2008, Hewlett-Packard Company LP
The information contained herein is subject to change without notice.

Installation
In order to ensure optimized field coverage (dependant on
final antenna orientation), please note the color coded port
identification :
Blue= Vertically Polarized
Red= Vertically Polarized
Green= Horizontally Polarized
The J9169A is shipped with a heavy duty articulating
mount* that allows mounting to a mast, or optionally,
to a vertical surface utilizing wall anchors/molys.
HP ProCurve Networking J9169A
* See mounting bracket kit for instructions.(HP 5070-6360)
Lightning Arrester (Optional)
In external applications, it is recommended that you also
install three lightning arresters (HP J8996A or equivalent),
one for each port of the antenna. Lightning arresters are
not included with the antenna and must be purchased
separately.
For best results, install the lightning arrester in close
proximity to a low-resistance ground at a point where the
coaxial cable enters the building (see Photo 1). In most
cases, one 8-foot rod driven into moist soil, or multiple
rods bonded together, will provide adequate grounding
(see National Electrical Code guidelines).
Be sure to install the lightning arrester in an accessible
location that permits periodic inspection and
replacement (as needed).
Provide drip loops in cables to prevent water from
entering the building (see Photo 2).
Antenna Location
For best results, mount the J9169A facing towards the
center of the coverage area. A line-of-sight path between
the antenna and active floor works best. Avoid mounting
next to a column or vertical support that could create a
shadow zone and reduce coverage to only one portion of
the room.
To connect the Lightning Arrester to ground, use a very
short and direct run of #10 solid copper wire (or
equivalent).
For exterior installations, use weatherproof coax
connectors with a suitable mastic or rubberized tape to
prevent water incursion (see Photo 1).
Lightning Arrester (continued)
Photo 1
Photo 2
Sealant Tape
or Rubberized Protectant
# 10 Ground Lead
Blue
Green
Red
Drip Loops
Ground
Connection

HP ProCurve Networking J9169A
J9169A Narrow Sector Radiation Plots (2.45 GHz)
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 2 E Plane 2.45 GHz Port 2 H Plane 2.45 GHz
Port 1 E Plane 2.45 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 1 H Plane 2.45 GHz
Port 3 E Plane 2.45 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 3 H Plane 2.45 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 1
Port 2
Port 3
11
22
3
3

HP ProCurve Networking J9169A
Port 3 E Plane 5.47 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
J9169A Narrow Sector Radiation Plots (5.47 GHz)
Port 1 E Plane 5.47 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 1 H Plane 5.47 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 2 E Plane 5.47 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
Port 2 H Plane 5.47 GHz
11
22
3
Port 3 H Plane 5.47 GHz
0
350
340
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190 180 170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
-30 -20 -10
dB
3