HP 705 User manual

Part Number A1658–90661
Edition E0895
Printed in U.S.A.

Front View
LED
NOTICE: The first three jumpers
(1, 2, and 3) are the SCSI ID jumpers. The only other jumper that should be
in place
is 7
.
These are the only jumpers that should be installed.
J3
1 2 3 4 5 8 9 106 7
SCSI
ID
First Drive Second Drive
6 5 4 3
2 1 0
Quantum Disk Drive Jumpers
Installing Your Disk Drive
(Single–Ended SCSI)
Refer to your workstation owner’s guide or your disk drive installation guide for detailed information about installing your disk drive. During the installation procedure, you may have to change the SCSI ID of your disk drive. Refer to the appropriate illustration to set the SCSI ID jump- ers to the desired SCSI ID.
NOTICE: We recommend that you use SCSI ID 6
for your workstation’s first hard disk drive, and SCSI ID 5 for the second hard disk drive.

NOTICE: The first three jumpers
(1, 2, and 3) should be removed
. The SCSI ID
jumpers are jumpers 4, 5, and 6.
SCSI
ID 61 234 5
First Drive Second Drive
6 5 4 3 2 1 0
Seagate Disk Drive Jumpers
SCSI
ID
First Drive Second Drive
6 5 4 3 2 1 0
Hewlett-Packard Disk Drive Jumpers