HP Compaq 6000 Pro SFF User manual

Maintenance & Service Guide
HP Compaq 6000 Pro All-in-One PC

© Copyright 2010 Hewlett-Packard
Development Company, L.P. The information
contained herein is subject to change
without notice.
Microsoft and Windows are trademarks of
Microsoft Corporation in the U.S. and other
countries.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
This document contains proprietary
information that is protected by copyright.
No part of this document may be
photocopied, reproduced, or translated to
another language without the prior written
consent of Hewlett-Packard Company.
Maintenance & Service Guide
HP Compaq 6000 Pro All-in-One PC
First Edition (June 2010)
Document Part Number: 628499-001

About This Book
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage
to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
iii

iv About This Book

Table of contents
1 Product Features ............................................................................................................... 1
Front Components .................................................................................................................... 3
Rear and Side Components ....................................................................................................... 4
2 Installing and Customizing the Software ........................................................................... 5
Installing the Operating System .................................................................................................. 5
Downloading Microsoft Windows Updates ................................................................................. 6
Installing or Upgrading Device Drivers (Windows systems) ............................................................ 6
Accessing Disk Image (ISO) Files ............................................................................................... 6
Protecting the Software ............................................................................................................. 7
3 Computer Setup (F10) Utility ............................................................................................. 8
Computer Setup (F10) Utilities ................................................................................................... 8
Using Computer Setup (F10) Utilities ............................................................................ 9
Computer Setup—File .............................................................................................. 11
Computer Setup—Storage ........................................................................................ 12
Computer Setup—Security ........................................................................................ 14
Computer Setup—Power .......................................................................................... 18
Computer Setup—Advanced .................................................................................... 19
Recovering the Configuration Settings ....................................................................................... 22
4 Serial ATA (SATA) Drive Guidelines and Features ............................................................ 23
SATA Hard Drives .................................................................................................................. 23
SATA Hard Drive Cables ........................................................................................................ 23
SATA Data Cable ................................................................................................... 23
SMART ATA Drives ................................................................................................................. 24
Hard Drive Capacities ............................................................................................................ 24
5 Identifying the Chassis, Routine Care, and Disassembly Preparation ............................... 25
Chassis Designation ............................................................................................................... 25
All-in One .............................................................................................................. 25
Electrostatic Discharge Information ........................................................................................... 26
Generating Static .................................................................................................... 26
v

Preventing Electrostatic Damage to Equipment ............................................................ 26
Personal Grounding Methods and Equipment ............................................................. 27
Grounding the Work Area ....................................................................................... 27
Recommended Materials and Equipment .................................................................... 28
Operating Guidelines ............................................................................................................. 28
Routine Care ......................................................................................................................... 29
General Cleaning Safety Precautions ......................................................................... 29
Cleaning the Computer Case .................................................................................... 29
Cleaning the Keyboard ............................................................................................ 29
Cleaning the Monitor ............................................................................................... 30
Cleaning the Mouse ................................................................................................ 30
Service Considerations ........................................................................................................... 30
Tools and Software Requirements .............................................................................. 30
Screws ................................................................................................................... 31
Cables and Connectors ............................................................................................ 31
Hard Drives ............................................................................................................ 31
Lithium Coin Cell Battery .......................................................................................... 31
6 Illustrated parts catalog .................................................................................................. 33
Computer major components ................................................................................................... 33
Mass storage devices ............................................................................................................. 36
Sequential part number listing .................................................................................................. 37
7 Removal and Replacement Procedures All-in One (AIO) Chassis ...................................... 39
Preparing to Disassemble the Computer .................................................................................... 39
Small Rear Cover ................................................................................................................... 40
Port Cover ............................................................................................................................. 41
Stand ................................................................................................................................... 42
Optical Drive ......................................................................................................................... 43
Hard Drive ............................................................................................................................ 45
Memory ................................................................................................................................ 48
Upper Rear Panel ................................................................................................................... 50
Webcam Module ................................................................................................................... 52
Bluetooth Module ................................................................................................................... 54
Small Fan .............................................................................................................................. 56
Heat Sink (Thermal Module) .................................................................................................... 57
Processor .............................................................................................................................. 58
Graphics Board ..................................................................................................................... 60
I/O Panel ............................................................................................................................. 62
TV Tuner Module .................................................................................................................... 64
Cable Connector .................................................................................................................... 66
WLAN Module ...................................................................................................................... 68
Outer/Left Rear Panel ............................................................................................................. 70
vi

Display Control Board ............................................................................................................ 72
Power Button Board ................................................................................................................ 74
Inverter Board ........................................................................................................................ 76
Optical Drive Connector Board ................................................................................................ 78
Hood Sensor ......................................................................................................................... 80
Hard Drive Connector ............................................................................................................. 82
Fan ...................................................................................................................................... 84
Speakers ............................................................................................................................... 86
System Board Shield ............................................................................................................... 87
System Board ........................................................................................................................ 89
Display Panel ........................................................................................................................ 91
Appendix A POST Error Messages ...................................................................................... 93
POST Numeric Codes and Text Messages ................................................................................. 94
Interpreting POST Diagnostic Front Panel LEDs and Audible Codes ............................................. 101
Appendix B Connector Pin Assignments ........................................................................... 105
Ethernet BNC ...................................................................................................................... 105
USB .................................................................................................................................... 105
Microphone ........................................................................................................................ 105
Headphone ......................................................................................................................... 106
Line-in Audio ....................................................................................................................... 106
Line-out Audio ...................................................................................................................... 106
Appendix C Power Cord Set Requirements ....................................................................... 107
General Requirements .......................................................................................................... 107
Japanese Power Cord Requirements ....................................................................................... 107
Country-Specific Requirements ............................................................................................... 108
Appendix D Specifications ............................................................................................... 109
All-in One Models ................................................................................................................ 109
Index ............................................................................................................................... 110
vii

viii

1 Product Features
The HP Compaq 6000 Pro All-In One Business PC offers the following features:
●Intel® Core™ 2 Duo processors
●Windows® 7 Professional 32- or 64-bit operating system
●Up to 8 gigabytes (GB) of DDR3 memory
●Hard drives up to 1 terabyte
●Optional 80-GB solid-state drive
●21.5-inch diagonal widescreen Full HD WLED anti-glare display (1080p)
●Bluetooth® wireless solutions
●16x Max SuperMulti optical drive and slim-tray DVD burner with Lightscribe
●7 USB ports
●IEEE 1394 Firewire® port
●6-in-1 memory card reader
●Integrated Intel Graphics Media Accelerator 4500 HD, or optional NVIDIA GeForce GT230
discrete graphics
●Optional TV tuner
●PS/2 ports for the mouse and keyboard
●Removable panels on the back of the chassis allow administrators to easily and efficiently service
the PC
●Adjustable tilt and swivel stand
●Intel Q43 Express chipset
●Optional wireless connectivity:
◦802.11 b/g/n wireless LAN module
◦Bluetooth® 2.1
●Intel Standard Manageability
1

●Face Recognition for HP ProtectTools software with auto-login capabilities
●TPM 1.2-compliant embedded security chip
●VESA-compliant mounting solutions
●HD webcam
●Dual-array microphone
●Premium stereo speakers
●HP SkyRoom full version for professional quality visual collaboration built on HP Video and Image
processing engines for hi-fi audio, hi-def video, and hi-performance 3D application sharing
NOTE: SkyRoom is shipped only on computers with Dual Core Processors, at least 2 GB of
memory, a selectable Windows operating system, and the selectable webcam/mic AV.
●Microsoft® Office Communicator certified
●ENERGY STAR® qualified, EPEAT® Gold registered, and offers 89-percent energy-efficient power
●HP Power Assistant software
●HP MediaSmart software for photos, music, video, DVD, webcam, and TV tuner
●Choice of wired or wireless keyboard and mouse
2 Chapter 1 Product Features

Front Components
Component Component
(1) Dual microphone array (8) Drive activity LED
(2) Webcam (optional) (9) Power button and LED
(3) 21.5-inch diagonal 16:9 widescreen LED-
backlit full HD LCD display
(10) High-performance stereo speakers
(4) Tray-load optical drive (optional) (11) IR Receiver and LED (select models only)
(5) Optical drive eject button (12) Adjustable tilt and swivel stand
(6) Brightness increase button (13) HP low-profile keyboard* with numeric keypad
(7) Brightness decrease button (14) HP optical mouse*
*Wired or optional wireless
Front Components 3

Rear and Side Components
Component Component
(1) HP 6-in-1 Media Card Reader (13) Stereo audio line out
(2) IEEE 1394 port (14) (4) USB 2.0 ports
(3) (2) USB 2.0 ports (15) PS/2 mouse port
(4) Headphone jack (16) PS/2 keyboard port
(5) Microphone/line in jack (17) USB 2.0 port (used for optional wireless keyboard/mouse
transmitter/receiver)
(6) Hard drive access (18) RJ-45 Gigabit Ethernet port
(7) Optical drive access (19) Power connector with LED indicator
(8) Removable access panels (20) VESA-compliant mounting holes (4)
(9) Memory access (21) Adjustable tilt and swivel stand
(10) DisplayPort (22) Access cover panel
(11) TV tuner coax jacks (optional) (23) Lock slot
(12) IR Emitter (Blaster) output (optional)
4 Chapter 1 Product Features

2 Installing and Customizing the
Software
If your computer was not shipped with a Microsoft operating system, some portions of this
documentation do not apply. Additional information is available in online help after you install the
operating system.
NOTE: If the computer was shipped with Windows Vista or Windows 7 loaded, you will be
prompted to register the computer with HP Total Care before installing the operating system. You will
see a brief movie followed by an online registration form. Fill out the form, click the Begin button, and
follow the instructions on the screen.
CAUTION: Do not add optional hardware or third-party devices to the computer until the operating
system is successfully installed. Doing so may cause errors and prevent the operating system from
installing properly.
NOTE: Be sure there is a 10.2-cm (4-inch) clearance at the back of the unit and above the monitor to
permit the required airflow.
Installing the Operating System
The first time you turn on the computer, the operating system is installed automatically. This process
takes about 5 to 10 minutes, depending on which operating system is being installed. Carefully read
and follow the instructions on the screen to complete the installation.
CAUTION: Once the automatic installation has begun, DO NOT TURN OFF THE COMPUTER UNTIL
THE PROCESS IS COMPLETE. Turning off the computer during the installation process may damage the
software that runs the computer or prevent its proper installation.
NOTE: If the computer shipped with more than one operating system language on the hard drive, the
installation process could take up to 60 minutes.
If your computer was not shipped with a Microsoft operating system, some portions of this
documentation do not apply. Additional information is available in online help after you install the
operating system.
Installing the Operating System 5

Downloading Microsoft Windows Updates
1. To set up your Internet connection, click Start > Internet Explorer and follow the instructions
on the screen.
2. Once an Internet connection has been established, click the Start button.
3. Select the All Programs menu.
4. Click on the Windows Update link.
In Windows Vista and Windows 7, the Windows Update screen appears. Click view
available updates and make sure all critical updates are selected. Click the Install button and
follow the instructions on the screen.
In Windows XP, you will be directed to the Microsoft Windows Update Web site. If you see
one or more pop-up windows that ask you to install a program from http://www.microsoft.com,
click Yes to install the program. Follow the instructions on the Microsoft Web site to scan for
updates and install critical updates and service packs.
It is recommended that you install all of the critical updates and service packs.
5. After the updates have been installed, Windows will prompt you to reboot the machine. Be sure to
save any files or documents that you may have open before rebooting. Then select Yes to reboot
the machine.
Installing or Upgrading Device Drivers (Windows
systems)
When installing optional hardware devices after the operating system installation is complete, you must
also install the drivers for each of the devices.
If prompted for the i386 directory, replace the path specification with C:\i386, or use the Browse
button in the dialog box to locate the i386 folder. This action points the operating system to the
appropriate drivers.
Obtain the latest support software, including support software for the operating system from
http://www.hp.com/support. Select your country and language, select Download drivers and
software (and firmware), enter the model number of the computer, and press Enter.
Accessing Disk Image (ISO) Files
There are disk image files (ISO files) included on your PC that contain the installation software for
additional software. These CD image files are located in the folder C:\SWSetup\ISOs. Each .iso file
can be burned to CD media to create an installation CD. It is recommended that these disks be created
and the software installed in order to get the most from your PC. The software and image file names
are:
●Corel WinDVD SD and BD – installation software for WinDVD – used to play DVD movies
●HP Insight Diagnostics OR Vision Diagnostics – software to perform diagnostic activities on your
PC
6 Chapter 2 Installing and Customizing the Software

Protecting the Software
To protect the software from loss or damage, keep a backup copy of all system software, applications,
and related files stored on the hard drive. Refer to the operating system or backup utility documentation
for instructions on making backup copies of your data files.
Protecting the Software 7

3 Computer Setup (F10) Utility
Computer Setup (F10) Utilities
Use Computer Setup (F10) Utility to do the following:
●Change factory default settings.
●Set the system date and time.
●Set, view, change, or verify the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
●Modify the boot order of bootable devices such as hard drives, optical drives, or USB flash media
devices.
●Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run
during a Full Boot. You can set the system to:
❑always Quick Boot (default);
❑periodically Full Boot (from every 1 to 30 days); or
❑always Full Boot.
●Select Post Messages Enabled or Disabled to change the display status of Power-On Self-Test
(POST) messages. Post Messages Disabled suppresses most POST messages, such as memory
count, product name, and other non-error text messages. If a POST error occurs, the error is
displayed regardless of the mode selected. To manually switch to Post Messages Enabled during
POST, press any key (except F1 through F12).
●Establish an Ownership Tag, the text of which is displayed each time the system is turned on or
restarted.
●Enter the Asset Tag or property identification number assigned by the company to this computer.
●Enable the power-on password prompt during system restarts (warm boots) as well as during
power-on.
●Establish a setup password that controls access to the Computer Setup (F10) Utility and the settings
described in this section.
●Secure integrated I/O functionality, including USB, audio, or embedded NIC, so that they cannot
be used until they are unsecured.
●Enable or disable removable media boot ability.
8 Chapter 3 Computer Setup (F10) Utility

●Solve system configuration errors detected but not automatically fixed during the Power-On Self-
Test (POST).
●Replicate the system setup by saving system configuration information on a USB flash drive and
restoring it on one or more computers.
●Execute self-tests on a specified ATA hard drive (when supported by drive).
●Enable or disable DriveLock security (when supported by drive).
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer. If you are in Microsoft Windows, click Start > Shut Down >
Restart.
2. As soon as the computer is turned on, press F10 before the computer boots to the operating
system to enter Computer Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again
press F10 before the computer boots to the operating system to access the utility.
3. Select your language from the list and press Enter.
4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,
Power, and Advanced.
5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)
keys to select the option you want, then press Enter. To return to the Computer Setup Utilities
menu, press Esc.
6. To apply and save changes, select File > Save Changes and Exit.
●If you have made changes that you do not want applied, select Ignore Changes and
Exit.
●To reset to factory settings or previously saved default settings (some models), select Apply
Defaults and Exit. This option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after
exiting the F10 Setup screen.
Table 3-1 Computer Setup (F10) Utility
Heading Table
File Table 3-2 Computer Setup—File on page 11
Storage Table 3-3 Computer Setup—Storage on page 12
Security Table 3-4 Computer Setup—Security on page 14
Computer Setup (F10) Utilities 9

Table 3-1 Computer Setup (F10) Utility (continued)
Power Table 3-5 Computer Setup—Power on page 18
Advanced Table 3-6 Computer Setup—Advanced on page 19
10 Chapter 3 Computer Setup (F10) Utility

Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-2 Computer Setup—File
Option Description
System Information Lists:
●Product name
●SKU number (some models)
●Processor type/speed/stepping
●Installed memory size/speed, number of channels (single or dual) (if applicable)
●Integrated MAC address for embedded, enabled NIC (if applicable)
●System BIOS (includes family name and version)
●Chassis serial number
●Asset tracking number
●ME firmware version
●Management mode
About Displays copyright notice.
Set Time and Date Allows you to set system time and date.
Flash System ROM Allows you to update the system ROM with a BIOS image file located on a USB flash media device
or CD-ROM.
Replicated Setup Save to Removable Media
Saves system configuration, including CMOS, to a USB flash media device or a diskette-like device
(a storage device set to emulate a diskette drive).
Restore from Removable Media
Restores system configuration from a a USB flash media device or a diskette-like device.
Default Setup Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Apply Defaults and
Exit
Applies the currently selected default settings and clears any established passwords.
Ignore Changes
and Exit
Exits Computer Setup without applying or saving any changes.
Save Changes and
Exit
Saves changes to system configuration or default settings and exits Computer Setup.
Computer Setup (F10) Utilities 11

Computer Setup—Storage
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-3 Computer Setup—Storage
Option Description
Device
Configuration
Lists all installed BIOS-controlled storage devices.
When a device is selected, detailed information and options are displayed. The following options
may be presented:
Hard Disk: Size, model, firmware, serial number, connector color, SMART, emulation type.
Emulation type has the following choices:
●None (prevents BIOS data accesses and disables it as a boot device)
●Hard Disk (treated as a hard disk)
Translation Mode (ATA disks only)
Lets you select the translation mode to be used for the device. This enables the BIOS to access disks
partitioned and formatted on other systems and may be necessary for users of older versions of
UNIX (e.g., SCO UNIX version 3.2). Options are Automatic, Bit-Shift, LBA Assisted, User, and Off.
User mode allows you to specify the parameters (logical cylinders, heads, and sectors per track)
used by the BIOS to translate disk I/O requests (from the operating system or an application) into
terms the hard drive can accept. Logical cylinders may not exceed 1024. The number of heads may
not exceed 256. The number of sectors per track may not exceed 63. These fields are only visible
and changeable when the drive translation mode is set to User.
CAUTION: Ordinarily, the translation mode selected automatically by the BIOS should not be
changed. If the selected translation mode is not compatible with the translation mode that was
active when the disk was partitioned and formatted, the data on the disk will be inaccessible.
CD-ROM: Model, firmware, serial number, connector color. No emulation options available.
Default Values (ATA disks only)
SATA Defaults
Translation Mode (ATA disks only)
Lets you select the translation mode to be used for the device. This enables the BIOS to access disks
partitioned and formatted on other systems and may be necessary for users of older versions of
UNIX (e.g., SCO UNIX version 3.2). Options are Automatic, Bit-Shift, LBA Assisted, User, and Off.
User mode allows you to specify the parameters (logical cylinders, heads, and sectors per track)
used by the BIOS to translate disk I/O requests (from the operating system or an application) into
terms the hard drive can accept. Logical cylinders may not exceed 1024. The number of heads may
not exceed 256. The number of sectors per track may not exceed 63. These fields are only visible
and changeable when the drive translation mode is set to User.
CAUTION: Ordinarily, the translation mode selected automatically by the BIOS should not be
changed. If the selected translation mode is not compatible with the translation mode that was
active when the disk was partitioned and formatted, the data on the disk will be inaccessible.
12 Chapter 3 Computer Setup (F10) Utility