HP Compaq d330 DT Manual

System Unit
1 Chassis assembly not spared
2 Front bezel assembly, includes diskette drive bezel
and 5.25” bezel blank 337899-001
3 Computer cover 337897-001
4 Power supply, PFC 308615-001
Easy Access Keyboards (not illustrated)
PS/2
Wireless
USB
323686-xxx
323745-xxx
324634-xxx
Arabic -171 Norwegian -091
BHCSY B41 PRC -AA1
Czech -221 Polish# -241
Danish -081 Portuguese -131
Finnish -351 Russian -251
French -051 Slovakian -231
French Canadian -121 Spanish -071
German -041 Swedish -101
Greek -151 Swiss# -111
Hebrew -BB1 Taiwanese -AB1
Hungarian* -211 Thai -281
International -B31 Turkish -141
International -021 U.S. -001
Italian** -061 U.K. -031
Korean (Hanguel) -AD1
*not for 323745-xxx
**for 324634-xxx only
#for 323686-xxx only
Easy Access Keyboards (not illustrated)
PS/2 325445-xxx
Danish -081 Italian -061
German -041 Swedish -101
International -B31 Swiss -111
Easy Access Keyboards (not illustrated)
USB 323746-xxx
French -001 Russian -251
International -B31 Slovakian -231
Korean (Hanguel) -AD1 Taiwanese -AB1
PRC -AA1 U.S. -001
Standard and Optional Boards
1 System board with alcohol pad and thermal grease 323091-001
2 Front I/O device 326775-001
Intel Processors with alcohol pad and thermal grease
3 Celeron 2.0 GHz processor 309578-001
* Celeron 2.2 GHz processor 321723-001
* Celeron 2.3 GHz processor 335136-001
* Pentium 2.4 GHz processor 288689-001
* Pentium 2.53 GHz processor 333485-001
* Pentium 2.66 GHz processor 305579-001
* Pentium 2.8 GHz processor 305051-001
* Pentium 3.0 GHz processor 315637-001
* Pentium 2.4 GHz processor with Hyperthreading 335812-001
* Pentium 2.6 GHz processor with Hyperthreading 333863-001
* Pentium 2.8 GHz processor with Hyperthreading 333864-001
* Pentium 3.0 GHz processor with Hyperthreading 333865-001
Memory Modules
4 128 MB/266 MHz FSB 285648-001
* 256 MB/266 MHz FSB 285649-001
* 512 MB/266 MHz FSB 285650-001
* 128 MB/333 MHz FSB 314795-001
* 256 MB/333 MHz FSB 314793-001
* 512 MB/2333 MHz FSB 314796-001
* 1.0 GB/233 MHZ FSB 314794-001
Other Cards
* Lucent V.92 Win modem with low profile bkt 239411-001
* Intel Gigabit NIC 314901-001
* Wireless LAN PCI Adapter (802.11) 332963-001
* nVidia GeForce2 MX400, 32 M, ATX bkt 309492-001
* nVidia GeForce4 MX400, 64 M, ATX bkt 322891-001
* nVidia Quadro4 100 NVS, 64 M, ATX bkt 322893-001
* DVI ADD 4 layer card 325833-001
*Not shown
© 2003 Hewlett-Packard Development Company, L.P.
HP and the HP logo are trademarks of Hewlett-Packard
Development Company, L.P.
All other product names mentioned herein may be
trademarks of their respective companies.
HP shall not be liable for technical or editorial errors or
omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein
should be construed as constituting an additional
warranty.
May 2003
Document Number
332964-002
hp compaq d330 Series Personal
Computer
illustrated parts map
desktop
Mass Storage Devices
1 40 GB\5400 RPM Hard drive 236921-001
* 80 GB\5400 RPM Hard drive 292208-001
* 40 GB\7200 RPM Hard drive 286692-001
* 80 GB\7200 RPM Hard drive 250185-001
* 160 GB/7200 RPM Hard drive 325306-001
2 Diskette drive with mounting screws 333505-001
3 48X CD-ROM drive with mounting screws 326773-001
* 52X CD-ROM drive with mounting screws 333969-001
* 48X/24X/48X CDRW 325308-001
* 48X/24X/48X +16X DVD/CD-RW 325309-001
* 4X DVD+R/RW 325317-001
* 16/40X DVD ROM Drive 325313-001
* Zip 250 Drive with mounting bracket 333504-001
* Zip 250 drive without mounting bracket 326772-001
* PC MCIA drive bay reader 331589-001
*Not shown
Cables
1 Diskette drive cable 257309-001
2 UATA data cable, 10”, 2 device (108950-037) 257047-001
* UATA data cable 14”, 2 device (108950-038) 257048-001
3 Power switch/LED cable 337898-001
4 Audio cable (387527-001) 149806-001
*Not shown
Miscellaneous Parts
1 Solenoid lock with cable 336442-001
2 Hood sensor 267529-001
3# Heatsink with thermal grease and alcohol pad 333866-001
4 Speaker 326776-001
5 Chassis fan 289771-001
* Mouse, 2-Button, PS/2 with scroll wheel 323614-001
* Mouse, 2-Button, USB, optical with scroll wheel 323617-001
* Mouse, 2-Button, wireless with scroll wheel 323616-001
* Mouse, 2-Button, USB, with scroll wheel 323615-001
# Misc screw kit see reverse
* Diskette drive bay bezel blank 341869-001
* 5.25” Bay bezel blank 335937-001
* 3.5” bay bezel for Zip drive 341870-001
* Rubber foot (4 ea) 266051-001
* Drive Key, 16 MB 324780-001
* Drive Key, 64 MB 331465-001
* Drive Key, 128 MB 331466-001
* Real-Time-Clock battery 153099-001
* Port control cover 341871-001
* Return kit with buns 337912-001
*Not shown
#See back side for more information

Interchangeable Heatsinks
Heat Sink Removal
‘
System Board Connectors and Jumpers (position of some untitled components may vary in location)
E49 Password jumper P21 Secondary IDE
J20 PCI slot 1 P23 Front audio/USB
J21 PCI slot 2 P27 Miulti Bay
J22 PCI slot 3 P29 SCSI LED
J30 PCI slot extender P30 Primary Serial ATA (SATA) Port
J40 AGP slot P31 Secondary Serial ATA (SATA) Port
P1 Main power (20 pin) P54 Serial Port “B”
P3 CPU regulator power (4 pin) P70 CPU fan
P5 Front panel P124 Hood lock
P6 Internal chassis speaker P125 Hood sensor
P7 CD audio in SW50 CMOS button
P8 Chassis fan XBT1 Battery
P10 Diskette drive XMM1 Memory socket
P11 Aux audio in XMM2 Memory socket
P14 Boot block XMM3 Memory socket
P16 Power supply fan control XMM4 Memory socket
P20 Primary IDE XU100 Security
System Hardware Interrupts
IRQ System Function IRQ System Function
0 Timer Interrupt 8 Real-Time Clock
1 Keyboard 9 Unused
2 Interrupt Controller Cascade 10 Unused, available for PCI
3 Serial Port (COM B) 11 Unused, available for PCI
4 Serial Port (COM A) 12 Mouse
5 Unused, available for PCI 13 Coprocessor
6 Diskette Drive 14 Primary ATA (IDE) Controller
7 Parallel Port (LPT 1) 15 Secondary ATA (IDE) Controller
Computer Diagnostic LEDs (on front of computer)
LED Color LED Activity State/Message
Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Green Off (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off
Power Red 1 blink followed by 2-second
pause - Repeat Power Supply failure
Power Red* 2 blinks 1 second apart CPU thermal shutdown
Power Red* 3 blinks 1 second apart CPU not installed
Power Red* 4 blinks 1 second apart Power supply overload ( crow bar)
Power Red* 5 blinks 1 second apart No memory
Power Red* 6 blinks 1 second apart No graphics
Power Red* 7 blinks 1 second apart System board failure (detected prior to video)
Power Red* 8 blinks 1 second apart Invalid ROM
Hard Drive Green Blinking Hard drive activity
*Blinking codes are repeated after a 2 second pause.
Keyboard Diagnostic LEDs, PS/2 Keyboards Only
LED Color LED Activity State/Message
Num, Caps,
Scroll Lock Green On (Rising Tone) ROM reflashed successfully
Num Lock Green On ROMPaq diskette not present, is bad, or drive
not ready.*
Caps Lock Green On Enter password.
Num, Caps,
Scroll Lock Green Blink On in sequence, one at a time - N, C, SL Keyboard locked in network mode
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all
three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off,
then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.
Miscellaneous Screw Kit (not illustrated)
Miscellaneous screw kit 337237-001
M3 x 5mm, hitop (263585-001) 4 ea
#6-32 x .250, hitop (262508-001) 8 ea
#6-32 x .250, pan head (101517-067) 3 ea
#6-32 x .312, hitop (262508-002) 4 ea
#6-19 x .312, pan head (101346-068) 2 ea
#6-19 x .315, T15 head (331310-001) 2 ea
Clearing CMOS*
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using switch SW50.
To clear and reset the configuration, perform the following procedure:
1. Prepare the computer for disassembly.
ÄCAUTION: The power cord must be disconnected from the power source before pushing the Clear CMOS
Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
2. Remove the access panel.
3. Press the CMOS button located on the system board and keep it depressed for 5 seconds.
4. Replace the access panel.
5. Turn the computer on and run F10 Computer Setup (Setup-utility) to reconfigure the system.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Disabling or Clearing the Power-On and Setup Passwords*
1. Turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. Locate the header and jumper labeled E49.
4. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it.
5. Replace the access panel.
6. Plug in the computer and turn on power. Allow the operating system to start.
NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features.
7. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2.
8. Repeat steps 5-6, then establish new passwords.
Refer to the Computer Setup (F10 Setup) instructions to establish new passwords.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Computer Setup (F10) Utility Features (not all features may be available)
File System Information About
Set Time and date
Save to Diskette
Restore From Diskette
Set defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Storage Device Configuration
Options IDE DPS Self-Test Controller Order SCSI Narrow Termination Boot Order
Security Setup Password
Power-On Password
Password Options
Smart Cover
Smart Sensor
DriveLock
Master Boot Record Security
Save Master Boot Record
Restore Master Boot Record
Device Security
Network Service Boot
System IDs
Advanced Power-On Options
Onboard devices PCI Devices Bus Options Device Options PCI VGA Configuration
Note: See Computer Setup (F10) Utility Guide on the Documentation Library CD.