HP Compaq dx2700 Microtower and Small Form... Setup guide

System Unit
1 Front bezel (1 solid silver) with diskette drive bezel
and 2 - 5.25" bezel. (See Miscellaneous parts for kit
contents) for dx2700 MT model
435333-001
2 Front bezel (carbonite and silver) with diskette drive
bezel and 2- 5.25” bezel blanks for dx2708 MT
models
435334-001
3 Power supply, 250W PFC 435332-001
* Power supply, 250W non-PFC 435303-001
* Power supply, 300W non-PFC 435330-001
4 Access panel used on all models 435331-001
5 Chassis not spared
* Not shown
Mass Storage Devices
1 Diskette drive, 3.5-inch 435420-001
240GB, SATA 1.5G 416737-001
*80GB, SATA 3G 391945-001
*160GB, SATA 3G 391741-001
*250GB, SATA 3G 391937-001
* 52X CD-ROM drive 419619-001
* 16X DVD +/- RW drive (LS/DL/DF) 419498-001
* 16X/48X DVD-ROM drive 419496-001
* 48X/32X Combo Drive 419497-001
* Not shown
Blanks Cables
Cable kit 435309-001
1 Diskette drive cable
2 Hard drive cable, primary SATA (1 device)
* Optical drive cable, secondary SATA (2 devices)
3 Audio cable for Linux 419207-001
* Not shown
Keyboards (not illustrated)
Keyboard, PS2 382925-xxx
International -B31
Peoples Republic of China -AA1
Taiwanese -AB1
Thai -281
KOR -AD1
Keyboard, USB 382926-xxx
International -B31
Peoples Republic of China -AA1
Taiwanese -AB1
Thai -281
KOR -AD1
* Not shown
Standard and Optional Boards
Memory modules
1 256MB, PC2-4200 393392-001
* 512MB, PC2-4200 393393-001
* 1GB, PC2-4200 393394-001
* 256MB, PC2-5300 396519-001
* 512MB, PC2-5300 396520-001
* 1GB, PC2-5300 398038-001
Intel Processors with alchohol pad and thermal grease
* Celeron 3.33GHz/512K/D-0, LGA775 processor 433508-001
* Celeron 3.46GHz/512K/D-0, LGA775 processor 434708-001
2 Celeron 3.2GHz LGA775 processor 382503-001
* Celeron 2.8GHz LGA775 processor 391941-001
* Celeron 3.06GHz LGA775 processor 405693-001
* Celeron 2.66GHz LGA775 processor 391940-001
* Celeron 2.53GHz LGA775 processor 407322-001
* Conroe, 1.86GHz/1066, 2M, B-2 418947-001
* Conroe, 2.13GHz/1066, 2M, B-2 418948-001
* Conroe, 2.4GHz/1066, 4M, B-2 418949-001
* Conroe, 2.66GHz/1066, 4M, B-2 418950-001
* Presler-915, Mnstm, 2.8GHz, 4M, C-1 433843-001
* Presler-945, Mnstm, 3.4GHz, 4M, C-1 433890-001
* Presler-925, Mnstm, 3.0GHz, 4M, C-1 433510-001
* Smthfld-820, Mnstm, 2.8G, 2M, B-0 432623-001
* Smthfld-805, Mnstm, 2.66G,2M, B-0 433912-001
* P4-541, Mstrm, 3.2G, 1M, G-1 433860-001
* P4-531, Mstrm, 3.0G, 1M, G-1 394642-001
* P4-524, Mstrm, 3.06G/533MHz 360734-413
3 Front I/O PCA with cable for MT 435304-001
System board with alcohol and thermal grease
* System board 435316-001
Other boards
* Intel Gb NIC PCIe, FH 430654-001
* Broadcom Gb NIC PCIe, FH 398754-001
* MDM, PCI modem, V92, FH 398661-001
* Not shown
# Spared with alcohol wipe and thermal grease
Miscellaneous Parts
Miscellaneous hardware kit. Includes: 435308-001
1 5.25” drive bezel blank without metal shield (1 ea)
2 Diskette drive bezel without metal shield, silver (1 ea)
6 3.5” diskette drive bezel without metal shield (carbonite) (1 ea)
5 Cover slot (2 ea)
4 Cover slot lock (1 ea)
3 Heatsink with alcohol pad and thermal grease 435313-001
* System Fan 435307-001
* USB scroll mouse carbonite 390939-001
* USB optical mouse carbonite 390938-001
* PS/2 scroll mouse 390937-001
* PS/2 optical Mouse 417966-001
* Sensor, intrusion 435312-001
* Internal speaker 435327-001
* Battery, real-time clock 153099-001
Miscellaneous screw kit, includes : 435305-001
*#6-32 x 0.25 lg pan head (11 ea, for power supply, cover slot lock
and motherboard.)
* #6-32 x 0.187 lg hi top (10 ea, 2 for I/O bracket, 4 for Hard Disk
Drive, 2 for Optical drive, 2 for Hard disk drive bracket)
* #6-32 x 0.312 lg hi top (1 ea, for Access panel)
* #6-32 flat screw (1 ea, for Power supply bracket)
* M3 x 0.5 screw for Diskette Drive (3 ea)
* Screw for system fan (4 ea)
dx2700/dx2708 © 2006 Hewlett-Packard Development
Company, L.P.
HP and the HP logo are trademarks of Hewlett-Packard
Development Company, L.P.
Intel and Celeron are US registered trademarks of Intel
Corporation. All other product names mentioned herein
may be trademarks of their respective companies.
HP shall not be liable for technical or editorial errors or
omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein
should be construed as constituting an additional
warranty.
September 2006
Document Part Number 431673-001
HP Compaq Business Desktop
dx2700/dx2708
Microtower Models
Illustrated Parts Map
Conroe, Pentium D (Presler/Smithfield), Pentium 4,
and Celeron D Processors

Miscellaneous cable kit 435309-001
* 1. Hard Disk Drive cable - 280mm (SATA connector) x 1
* 2. Optical drive cable x 1, 380mm - SATA
* 3. Diskette drive cable x 1, 200mm
* RJ11 cable 198220-005
* Not shown
System Board Connectors and Jumpers (position of some untitled components may vary in location)
Label Component Label Component
XU1 Processor socket Clear_CMOS Clear CMOS header
CPU_FAN CPU fan J94 Front panel header
DIMM1 Memory socket 1 XBT1 Real-time-clock battery
DIMM2 Memory socket 2 Front_Audio Front audio header
DIMM3 Memory socket 3 CD_in CD in audio
DIMM4 Memory socket 4 PCI 1 PCI 1 connector
FLOPPY Diskette drive connector PCI 2 PCI 2 connector
Power ATX main power PCI 3 PCI 3 connector
SATA1 SATA connector 1 PCIE X 1 PCI-E x1 connector
SATA2 SATA connector 2 SYS_FAN System fan
SATA3 SATA connector 3 P5 CPU 4 pin power connector
SATA4 SATA connector 4
#See table below
AGP socket not shown in this drawing
Clear_CMOS CMOS
Clear CMOS 1-2
Normal (Default) 2-3
System Hardware Interrupts
IRQ System Function IRQ System Function
1Keyboard 10 VGA controller
3USB OHCI (DID:F02) 10 USB OHCI (DIA:F00)
4Serial Port 10 USB OHCI (DID:F00)
6FDC controller 10 Lan controller
7Parallel Port (LPT 1) 11 SATA controller
9USB OHCI (DIA:F01) 12 Mouse
9USB OHCI (DID:F01)
Establishing a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down >
Restart the computer.
2. When the F10 Setup message appears in the lower-right corner of the screen, press the F10 key. Press Enter to
bypass the title screen, if necessary. If you do not press F10 when prompted, a restart will be necessary.
3. Select supervisor password and press enter key, and follow the instructions on the screen. You may also want to
establish the Password check at this time. This will allow you to specify when the password will be required.
4. Before exiting, click Save Settings and Exit.
Changing a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer. To change
the setup password, run Computer Setup.
2. When the key icon appears, type your current password, a slash (/) or alternate de-limiter character, your new
password, another slash (/) or alternate delimiter character, and your new password again as shown:
current password/new password/new password.
NOTE: Type the new password carefully since the actual characters do not appear on the screen.
3. Press the enter key.
4. The new password will take effect the next time the computer is restarted.
SYS_FAN P5
PCIE X 1
PCI 1
PCI 2
PCI 3
FRONT AUDIO
HEADER CD_IN AUDIO
FRONT USB 1
FRONT USB 2
SATA 3
SATA 4
SATA 1
SATA 2
FRONT PANEL
HEADER
CLEAR CMOS
JUMPER
XBT1
FLOPPY
PWR P8
DIMM 4
DIMM 3
DIMM 1
DIMM 2
CPU_FAN
CPU XU1
Deleting a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer. To delete
the setup password, run Computer Setup (F10).
2. When the key icon appears, type your current password followed by a slash (/) or alternate delimiter character as
shown. Example: currentpassword/
3. Press the Enter key.
Clearing CMOS*
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using by performing the following procedure:
ÄCAUTION: The power cord must be disconnected from the power source before changing the jumper
setting. (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
1. Turn off the computer and any external devices, then disconnect the power cord from the power outlet.
2. Remove the access panel.
3. Clear CMOS with header J1.
4. Replace the access panel.
5. Connect the power cord to the power outlet.
6. Turn on the computer, allow it to start.
NOTE: Clearing CMOS clears all passwords.
Diagnostic LEDs
LED Color LED Activity State/Message
Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Normal Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Clear Off (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off
Power Green Green when flashing ROM Boot block recovery w/Embedded Video
Power Red Power LED turns into green and
start to blink two times every
second, followed by two second
pause.
CPU thermal shutdown
(Weak CPU fan speed or not running)
Power Red Power LED flashes 5 seconds
every 1 second, followed by 2
seconds pause, and meanwhile,
5 beeps are heard.
No memory installed / Pre-Video memory error
Power Red Power LED flashes 6 seconds
every 1 second, followed by 2
seconds pause, and meanwhile,
6 beeps are heard.
Graphics card error (Pre-Video graphics error)
Power Red Power LED flashes 8 seconds
every 1 second, followed by 2
seconds pause, and meanwhile,
8 beeps are heard.
System board failure or invalid ROM basing on
checksum.
Hard Drive Green Blinking Hard drive activity
Computer Setup (F10) Utility Features (not all features may be available)
System
Information
System S/N
Product Name
OwnerShip TAG
BIOS Version
BIOS Release Date
System Chipset Type
Processor Type
Processor Speed
CPU ID
Cache Size
Memory DIMM1
Memory DIMM2
Memory DIMM3
Memory DIMM4
DDR2 Memory Size
UUID
Chassis Serial Number
Asset TAG Number
Integrated MAC
Standard
CMOS
Features
System Date
System Time
Floppy Drive A
SATA Port 0
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 0/1 Working Mode
Halt On
Advanced
BIOS Features
Quick Power On Self Test
POST Delay Time (seconds)
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Boot Other Device
Load Boot Menu Selectable
APIC Mode
System Keyboard
Boot Up NumLock Status
Security Option
Advanced
Chipset
Features
PEG/Onchip VGA Control
On-Chip Frame Buffer Size
DVMT Mode
DVMT/FIXED Memory Size
Init Display First
Integrated
Peripherals
USB Controller
USB Legacy support
HD Audio
Onboard Lan
Onboard Lan Boot ROM
Onboard FDC Controller
Serial Port
Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Power
Management
Setup
ACPI Function
ACPI Suspend Type
Restore On AC/Power Loss
Resume On PME
Resume On Ring
Resume On Alarm
Date(of Month) Alarm
Time(hh:mm:ss) Alarm
PnP/PCI
Configurations
Reset Configuration Data
Resources Controlled By
IRQ Resources
Hardware
Monitor Setup
Reset Case Open Status
CPU Temperature
CPU Fan Speed
System Fan Speed
CPU Fan Fault Detect
SYS Fan Fault Detect
Load
Optimized
Defaults
Set
Supervisor
Password
Set User
Password
Save Setting
and Exit
Exit Without
Saving
Note: See Computer Setup (F10) Utility Guide on the Library CD.