HP Rp5700 - Point of Sale System Assembly instructions

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 1of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008
Product name
HP RP5700 computer
(DVD-PC-3 / MO-PC)
Identification code(s)
DVD-PC-3 HP RP5700:
4522 133 0161x
MO-PC HP RP5700
4522 133 0273x
Total weight [kg]
10kg
Manufacturer
Hewlett Packard
Address
Orteliuslaan 1000
Zip code
3528 BD Utrecht
Country
The Netherlands
Electronic info
HP_RP5700.pdf
Information in this document is incorporated from HP doc: HP—EL-MF877-00

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 2of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
Name / Model #1: HP RP5700
Name / Model #2
Name / Model #3
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HP products to remove components and materials requiring selective
treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column,
as applicable.
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
5 (system board; PSU
board; Power USB
board; Power COM
board; Riser card)
Batteries
All types including standard alkaline
and lithium coin or button style
batteries
1
Mercury-containing components
For example, mercury in lamps,
display backlights, scanner lamps,
switches, batteries
Liquid Crystal Displays (LCD) with a
surface greater than 100 sq cm
Includes background illuminated
displays with gas discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing
PCB/PCT)
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in
diameter or height
2
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardants
Components and parts containing toner
and ink, including liquids, semi-liquids
(gel/paste) and toner
Include the cartridges, print heads,
tubes, vent chambers, and service
stations.
Components and waste containing
asbestos
Components, parts and materials
containing refractory ceramic fibers
Components, parts and materials
containing radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 3of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Phillips screwdriver
Description #2 Dikes
Description #3 Torx screwdriver
T-15
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective
treatment:
1. Remove the top cover by the releasing latch on both sides of the top cover (see Figure 1).
2. Follow the arrow to swing the power supply and optical drive cage.(see Figure 2).
3. Unplug or cut all cables from the system board and daughter card.
4. To remove the front USB connector/board:
a. Remove the fan shroud by rotating the shroud up (1) and spreading its ears (2) to remove it from the chassis
(see Figure 3).
b. Remove the board by removing the screw that secures the front USB printed circuit board to the floor of the
chassis
(1) and pushing the USB port out of the chassis (2) (see Figure 4).
5. Remove the power supply from the chassis.(see Figure 5).
6. Remove the power USB card and power COM card by releasing the latch on the chassis wall (see Figure 6).
7. Remove the cards inserted in PCI-Ex1 and PCI-Ex16 by releasing the latch on the chassis wall (see Figure
7).
8. Remove the PCA from the chassis using a torx screw driver (see Figure 8).
9. To remove the battery:
Locate the battery and battery holder on the system board. Depending on the type of battery holder on the
system
board, complete the following instructions to remove the battery.
TYPE 1 BATTERY HOLDER (see Figure 9):
Lift the battery out of the holder.
TYPE 2 BATTERY HOLDER (see Figure 10):
To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery.
When the
battery pops up, lift it out.
TYPE 3 BATTERY HOLDER (see Figure 11):
Pull back on the clip that holds the battery in place, and then remove the battery.
10. HP uses one power supply vendor. See the instructions below to disassemble and remove required power
supply
components:
a. Remove the six screws from the top of the power supply (see Figure 12).
b. Remove the two screws from the back of the power supply (see Figure 12).
c. Remove the one screw from the front of the power supply (see Figure 13).
d. Slide the side piece off the power supply.
e. Cut the plastic tie that secures the wires to the power supply cover.
f. Cut all wires from the power supply PCA.
g. Remove the four screws that secure the PCA to the power supply chassis (see Figure 14).
h. Remove the seven capactors as indicated in Figure 15.
i. Cut the small PCA from the large PCA as indicated in Figure 16.
j. Remove the one capacitor from the small PCA as shown in Figure 16.

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 4of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the
items contained in the product that require selective treatment (with descriptions and arrows identifying
locations).

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 5of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 6of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 7of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 8of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 9of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 10 of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 11 of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008

Name:
Recycling Passport Computers HP RP5700
12NC:
4522 133 01610
Version: 00
Doc.Date: 2008-06-13
Author:
Pag.: 12 of 12
Group No: 579O
Section: -
Status: Draft
PHILIPS MEDICAL SYSTEMS NEDERLAND BV, BEST 2008