HP Workstation xw6000 Owner's manual

safety & regulatory information
hp workstation xw4000
hp workstation xw6000
Document Part Number: 301200-001
October 2002
This guide provides safety and regulatory information that is
compliant with U.S., Canada, and International regulations for the
above products.
301200-001.book Page i Friday, July 19, 2002 11:02 AM

© 2002 Hewlett-Packard Company
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft
Corporation in the U.S. and/or other countries.
All other product names mentioned herein may be trademarks of their respective
companies.
Hewlett-Packard Company shall not be liable for technical or editorial errors or
omissions contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material. The
information in this document is provided “as is” without warranty of any kind,
including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, and is subject to change without notice. The
warranties for HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
This document contains proprietary information that is protected by copyright.
No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of Hewlett-Packard
Company.
ÅWARNING: Text set off in this manner indicates that failure to follow
directions could result in bodily harm or loss of life.
ÄCAUTION: Text set off in this manner indicates that failure to follow
directions could result in damage to equipment or loss of information.
safety & regulatory information
hp workstation xw4000
hp workstation xw6000
First Edition (October 2002)
Document Part Number: 301200-001
301200-001.book Page ii Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information iii
Contents
1AgencyNotices
Regulatory Compliance Identification Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Federal Communications Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Mouse Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Declaration of Conformity for Products
Marked with the FCC Logo (United States only). . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3
Avis Canadien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3
European Union Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Energy Star Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
German Ergonomics Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
CDRH Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Compliance with International Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Laser Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7
Laser Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7
Battery Replacement Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8
2 Power Cord Set Requirements
301200-001.book Page iii Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information 1–1
1
Agency Notices
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and
identification, your product has been assigned a unique HP series
number. The series number can be found on the product nameplate
label, along with all required approval markings and information.
When requesting compliance information for this product, always
refer to this series number. The series number should not be confused
with the marketing name or model number of the product.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
■Consult the dealer or an experienced radio or television
technician for help.
301200-001.book Page 1 Friday, July 19, 2002 11:02 AM

1–2 Safety & Regulatory Information
Agency Notices
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Hewlett-Packard Company may void the user's authority to operate
the equipment.
Mouse Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Cables
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods in order to maintain compliance
with FCC Rules and Regulations.
Declaration of Conformity for Products
Marked with the FCC Logo (United States only)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
For questions regarding your product, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-652-6672.
301200-001.book Page 2 Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information 1–3
Agency Notices
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call [phone].
To identify this product, refer to the part, series, or model number
found on the product.
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
301200-001.book Page 3 Friday, July 19, 2002 11:02 AM

1–4 Safety & Regulatory Information
Agency Notices
European Union Notice
Products bearing the CE marking comply with the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by
the Commission of the European Community and if this product has
telecommunication functionality, the R&TTE Directive (1999/5/EC).
Compliance with these directives implies conformity to the following
European Norms (in parentheses are the equivalent international
standards and regulations):
■EN 55022 (CISPR 22)—Electromagnetic Interference
■EN55024 (IEC61000-4-2, 3, 4, 5, 6, 8, 11)—Electromagnetic
Immunity
■EN61000-3-2 (IEC61000-3-2)—Power Line Harmonics
■EN61000-3-3 (IEC61000-3-3)—Power Line Flicker
■EN 60950 (IEC 60950)—Product Safety
Japanese Notice
301200-001.book Page 4 Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information 1–5
Agency Notices
Energy Star Compliance
HP workstations marked with the Energy Star Logo are compliant
with the U.S. Environmental Protection Agency (EPA) Energy Star
Computers Program. The EPA Energy Star Logo does not imply
endorsement by the EPA. As an Energy Star Partner, Hewlett-Packard
Company has determined the products marked with the Energy Star
Logo meet the Energy Star guidelines for energy efficiency.
The Energy Star Computers Program was created by the EPA to
promote energy efficiency and reduce air pollution through more
energy-efficient equipment in homes, offices, and factories. HP
products achieve this by reducing the power consumption when not
being used. Instructions for using the energy saving features of your
computer are located in the “Power Management” section of the
Desktop Management Guide.
The power management feature of your computer is compatible with
any network operating system or environment that supports APM1.2.
This means the users in those environments will not be disconnected
from the network during the low-power operating state.
The Power Management feature, when used in conjunction with an
external Energy Star compliant monitor, will support the power-down
features of the monitor. The Power Management feature allows an
external monitor to go into low-power mode when the energy save
timeout occurs. To take advantage of this energy savings, the monitor
Power Management feature has been preset to power down the
monitor after 15 minutes of system inactivity. Refer to the “Power
Management” section of the Desktop Management Guide for
instructions on modifying or disabling this feature.
ÄCAUTION: Using the Energy Save Monitor feature with non–Energy Star
compliant monitors may cause video distortion when the Energy Save
timeout occurs.
301200-001.book Page 5 Friday, July 19, 2002 11:02 AM

1–6 Safety & Regulatory Information
Agency Notices
German Ergonomics Notice
HP workstations, when combined with HP Brand keyboards and
monitors that bear the “GS” approval mark, meet the requirements of
ZH 1/618 (German Safety Regulations for Display Work Places in the
Office Sector). The installation guides included with the monitor
provide configuration information.
Laser Safety
All HP systems equipped with a laser device comply with safety
standards, including International Electrotechnical Commission
(IEC) 825. With specific regard to the laser, the equipment complies
with laser product performance standards set by government agencies
as a Class 1 laser product. The product does not emit hazardous light;
the beam is totally enclosed during all modes of customer operation
and maintenance.
ÅWARNING: To reduce the risk of exposure to hazardous radiation:
■Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
■Do not operate controls, make adjustments, or perform procedures to
the laser device other than those specified herein.
■Allow only authorized HP service providers to repair the laser device.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration implemented regulations for laser
products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for
products marketed in the United States.
Compliance with International Regulations
All HP systems equipped with CD-ROM drives comply with
appropriate safety standards including IEC 825.
301200-001.book Page 6 Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information 1–7
Agency Notices
Laser Product Label
The following label or equivalent is located on the surface of HP laser
products:
Laser Information
■Laser Type: Semiconductor GaAIAs
■Wave Length: 780 +/- 35 nm
■Divergence Angle: 53.5 Degrees +/- 0.5 degrees
■Output Power: Less than 0.2 mW or 10,869 W·m-2 sr-1
■Polarization: Circular 0.25
■Numerical Aperture: 0.45 inches +/- 0.04 inches
This label indicates that the
product is classified as a
CLASS 1 LASER PRODUCT. This
label appears on a laser device
installed in your product.
If you have an LS-120 drive or
an LS-260 drive, this label is
located next to the Class 1 Laser
Product label on your system.
301200-001.book Page 7 Friday, July 19, 2002 11:02 AM

1–8 Safety & Regulatory Information
Agency Notices
Battery Replacement Notice
ÅWARNING: Your computer contains an internal lithium manganese dioxide,
vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire
and burns if the battery pack is not handled properly. To reduce the risk of
personal injury:
■Do not attempt to recharge the battery.
■Do not expose to temperatures higher than 60° C (140° F).
■Do not disassemble, crush, puncture, short external contacts, or
dispose of in fire or water.
■Replace only with the HP spare designated for this product.
NBatteries, battery packs, and accumulators should not be disposed of
together with the general household waste. In order to forward them
to recycling or proper disposal, please use the public collection
system or return them to HP, your authorized HP partners, or their
agents.
301200-001.book Page 8 Friday, July 19, 2002 11:02 AM

Safety & Regulatory Information 2–1
2
Power Cord Set Requirements
The power supply for your product is provided with Automatic Line
Switching (ALS). This feature allows the computer to operate on
input voltages between 100–200V or 200–400V.
The power cord set (flexible cord or wall plug) received with this
product meets the requirements for use in the country where you
purchased the equipment.
If you need to obtain a power cord for a different country, you should
purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and
current marked on the product’s electrical ratings label. The voltage
and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the
wire must be a minimum of 0.75 mm2or 18AWG, and the length of
the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you
have questions about the type of power cord to use, contact your HP
authorized service provider.
A power cord should be routed so that it is not likely to be walked on
or pinched by items placed upon it or against it. Particular attention
should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
301200-001.book Page 1 Friday, July 19, 2002 11:02 AM