HP Xw4200 - Workstation - 1 GB RAM Installation guide

13
Chapter 1
Chapter 1 Product Overview
This chapter presents an overview of the hardware components of the HP Workstation xw4200. For a
more detailed overview of all the hardware components and spare part numbers, visit
http://partsurfer.hp.com. This chapter includes the following sections:
“Product Features” on page 14
“Product Specifications” on page 20
“ENERGY STAR” on page 24
“Hyper-Threading Technology” on page 25

14 PRODUCT OVERVIEW
Product Features
Exploded View
The following illustration shows an exploded view of the HP Workstation xw4200.
NOTE Drive configurations can vary.
Figure 1-1 Exploded View
1Access panel 8Optical drive
2System fan 9Diskette drive
3Processor heatsink 10 Bezel
4Power supply 11 System speaker
5Memory 12 Processor
6System board 13 PCI Express Card
7Chassis 14 Hard drive
1234 56 7 8 9
1011121314

PRODUCT FEATURES 15
Chapter 1
Front Panel Components
The following illustration shows a typical HP Workstation xw4200. Drive configurations might vary
depending on the configuration that was purchased.
Figure 1-2 Front Panel Components
1Optical Drive* (optional) 6Diskette Eject Button 11 Universal Serial Bus (USB) Ports
2Optical Drive Activity Lights 7Optical Drive Eject Button 12 Headphone Connector
35.25 inch drive bays 8Power On Light 13 Microphone Connector
4Diskette Drive (optional) 9Power Button 14 IEEE-1394 Connector**
5Diskette Drive Activity Light 10 Hard Drive Activity Light
*An optical drive is a CD-ROM, CD-R/RW, DVD-ROM, DVD+R/RW, or CD-RW/DVD combo drive.
**IEEE-1394 is an optional feature. If the workstation was purchased without this option, then this connector will be covered.
1
2
3
4
5
6
7
8
9
10
11
12
13
14

16 PRODUCT OVERVIEW
Rear Panel Components
Figure 1-3 Rear Panel Components
1Power Cord Connector 9PS/2 Mouse Connector (green)
2PS/2 Keyboard Connector (purple) 10 Parallel Connector (burgundy)
3Serial Connector (teal) 11 Audio Line-In Connector (light blue)
4USB 12 RJ-45 Network Connector and two USB connectors
5Microphone Connector (pink) 13 Cable Lock Slot
6Audio Line-Out Connector (lime) 14 Padlock Loop
7Built In Self Test (BIST) LED (green) 15 Graphics Adapter
8Universal Chassis Clamp Lock
NOTE: The rear panel connectors are labeled with industry-standard icons to assist you in connecting your peripheral devices.
1
2
3
4
5
6
7
9
10
11
12
8
13
14
15

PRODUCT FEATURES 17
Chapter 1
System Board Components
The following illustration shows the system board connectors and sockets on the HP Workstation
xw4200.
Figure 1-4 System Board Components
1Second serial port connector
(optional)
13 CD-ROM audio 25 Clear CMOS button
2Keyboard/mouse 14 Auxiliary audio 26 Main power
3Serial 15 Chassis speaker 27 Serial ATA
4Parallel 16 Hard disk activity LED 28 Diskette drive
5USB 17 Front USB 29 MultiBay
6Audio 18 Trusted Platform Module
connector
30 IDE
7Network/USB 19 Front chassis fan (optional) 31 Memory modules sockets
8PCI Express x1 20 Front control panel 32 Processor fan
9PCI Express x16 21 Hood sensor 33 Processor
10 PCI 22 Boot block jumper 34 Solenoid hood lock
11 PCI Express x1 23 Battery 35 Processor power
12 Front audio 24 Password jumper 36 Rear chassis fan
1
2
3433 32 31 30
29
28
3
4
5
6
7
8
9
10
11
12 13 14 15 1617 1819 20
21
22
23
24
25
26
27
3536

18 PRODUCT OVERVIEW
The following illustration shows the HP Workstation xw4200 block diagram.
Figure 1-5 HP Workstation xw4200 Block Diagram

PRODUCT FEATURES 19
Chapter 1
Serial Number and COA Label Location
Each workstation has two unique serial number labels 1 and a certificate of authentication (COA) label 2.
The serial number labels are located on the top (in a minitower configuration) of the unit and on the rear
panel. Keep this number available when contacting customer service for assistance. The COA label is
located on the top panel (in a minitower configuration).
NOTE The COA label is only if you have a Microsoft XP preinstalled system.
\
12

20 PRODUCT OVERVIEW
Product Specifications
This section describes the physical, environmental, and graphical and PCI Express specifications for the
HP Workstation xw4200. For more specification information, visit http://www.hp.com and search for the
QuickSpecs for this product.
Physical Specifications
The following table shows the physical characteristics of the HP Workstation xw4200.
Environmental Specifications
The following table shows the HP Workstation xw4200 environmental specifications.
Table 1-1 HP Workstation xw4200 Physical Characteristics
Weight 16 kg/35 lb (typical configuration)
Tower Dimensions 45.0 cm (17.7 in) high
16.8 cm (6.6 in) wide
45.6 cm (17.9 in) deep
Maximum Altitude
(Non-pressurized)
Operating: 3,000 m (10,000 ft)
Non-operating: 9,100 m (30,000 ft)
Table 1-2 HP Workstation xw4200 Environmental Specifications
Temperature Operating: 5 to 35°C (40 to 95°F)
Non-operating: -40 to 60°C (-40 to 140°F)
Humidity Operating: 8 to 85%RH, non-condensing
Non-operating: 8 to 90%RH, non-condensing
Altitude Operating: 0 to 10,000 ft (3048m)
Non-operating: 0 to 30,000 ft (9144m)
Shock Operating ½-sine: 40g, 2-3ms
Non-operating:
½-sine: 160 cm/s, 2-3ms, (~100g)·
square: 422 cm/s, 20g
Vibration Operating Random: 0.5g (rms), 5-300 Hz
Non-Operating:
random: 2.0 g (rms), 10-500 Hz·

PRODUCT SPECIFICATIONS 21
Chapter 1
PCI and PCI Express Slot Power Specifications
Your workstation contains four PCI slots, two PCI Express x1 slots, and a single PCI Express x16 high-
end graphics slot. The following table describes the slots, card types, and maximum slot power.
NOTE For hardware specifications of other system components, such as graphics cards or optical
drives, visit the Web site of the specific manufacturer.
Table 1-3 Graphics and PCI Express Slot Power Specifications
Slot# Slot Type Slot Power (Maximum)
1 PCI Express x1 half-length 10 W*
2 PCI Express x16 graphics 75 W*
3-6 PCI 25 W*
7 PCI Express x1 full-length 25 W*
* In addition to these slot power specifications, the overall power consumption of the system (including I/O
cards, processor, and memory) must not exceed the maximum ratings of the system power supply.

22 PRODUCT OVERVIEW
Power Supply and Cooling
The following table shows the power supply specifications of the HP Workstation xw4200.
Table 1-4 HP Workstation xw4200 Power Supply Specifications
Full Ranging Input (No Line Select Switch) Yes
Active Power Factor Correction (APFC)
(Input Current is nearly 1/2 a non-APFC PS)
Yes
Passive Power Factor Correction (PFC) No
Operating Voltage Range 90 to 264 VAC/118 VAC
Rated Voltage Range 100 to 240 VAC
Rated Line Frequency 50 to 60 Hz/400 Hz
Operating Line Frequency Range 47 to 66 Hz/393 to 407 Hz
Rated Input Current 6.4A/6.4A
Maximum Rated Power 360 W
Heat Dissipation Typical 737.1 btu/hr
Maximum 1890.3 btu/hr (360W); 2152.8 (410W)
Power Supply Fan 92mm variable speed
Power Supply Dimensions 9.76 cm (3.843 in) wide
15 cm (5.906 in) high
15.371 cm (6.052 in) deep
ENERGY STAR Compliant Yes
FEMP Standby Power Compliant
(<2W in S5–Power Off)
No
Power Consumption in ES Mode–Suspend to RAM (S3)
(Instantly Available PC)
2.5 W
Built-in Self Test LED Yes
Surge Tolerant Full Ranging Power Supply Withstands power surges up to 2000 V