HP K4000 User instructions

HP K4000 Bluetooth Keyboard - Setting up
the Bluetooth Keyboard
This document applies to setting up the HP K4000 Slim Bluetooth Keyboard.
Figure : HP K4000 Slim Bluetooth Keyboard
Contents and components
The keyboard includes the following:
Slim Bluetooth Keyboard with:
oPairing button
oOn/off power button
oBattery compartment
Figure : HP K4000 Slim Bluetooth Keyboard controls
4. Pairing button
5. Power button
6. Battery compartment
2 AAA Batteries
Quick Setup poster

Step 1: Inserting batteries
Insert 2 AAA alkaline batteries in the battery compartment, accessed from the rear panel.
Step 2: Power on
Power on the HP computer, and then power on the Slim Bluetooth Keyboard by sliding the
power switch to its power-on position.
note:
You must have Bluetooth wireless technology installed on your computer to complete this
procedure.
Step 3: Preparing to pair the Bluetooth keyboard with your computer
Before pairing the Slim Bluetooth Keyboard with an HP computer, ensure that the computer has
Bluetooth in Discovery mode:
For Windows 7:
1. Right-click the Bluetooth icon in the notification area, at the far right of the taskbar, and
then click Open Settings.
2. In the Options tab, click the box under Discovery to Allow Bluetooth devices to find
this computer.
3. Click Apply, and then click OK.
For Windows 8:

1. From the Windows 8 Desktop screen, select the Bluetooth icon in the notification area,
at the far right of the taskbar, and then click Open Settings.
2. In the Options tab, click the box under Discovery to Allow Bluetooth devices to find
this computer.
3. Click Apply, and then click OK.
Step 4: Pairing the HP K4000 Bluetooth Keyboard with your computer
To pair the Slim Bluetooth Keyboard with an HP computer:
1. Press and hold the pairing button for three seconds.
2. If you are using Windows 7, right-click the Bluetooth icon in the notification area, at
the far right of the taskbar, and then click Add a device.
If you are using Windows 8, from the Windows Start screen, swipe from the right edge
of the touch screen (if you are using a mouse, point to the upper-right corner of the
screen) to display the charms, and select Settings > Change PC settings > Devices >
Add a device.
3. Select HP Slim Bluetooth Keyboard from the list of devices displayed in the Add a
device window.
4. Use the Bluetooth Keyboard to type the variable PIN code displayed in the next window,
and then press Enter.