HP Compaq Business nx9110 User manual

b
Modem and Networking
Compaq Notebook Series
Document Part Number: 267639-001
April 2002
This guide describes the modem and networking features on the
notebook and explains how to connect a modem cable and a
network cable. It also provides instructions for using the modem
when travelling internationally.
267639-001.book Page i Friday, January 18, 2002 8:31 AM

© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, Evo, and Presario are trademarks of Compaq
Information Technologies Group, L.P. in the U.S. and/or other countries.
Microsoft and Windows are trademarks of Microsoft Corporation in the
U.S. and/or other countries.
All other product names mentioned herein may be trademarks of their
respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein. The information is provided “as is” without warranty of
any kind and is subject to change without notice. The warranties for
Compaq products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as
constituting an additional warranty.
Modem and Networking Guide
First Edition April 2002
Document Part Number: 267639-001
267639-001.book Page ii Friday, January 18, 2002 8:31 AM

Modem & Networking iii
Contents
1 Using an Internal Modem
Connecting the Modem Cable . . . . . . . . . . . . . . . . . . . . . 1–2
Using the RJ-11 Cable. . . . . . . . . . . . . . . . . . . . . . . . 1–2
Using a Country-Specific Modem Cable Adapter. . . 1–4
Adding New Locations When Travelling . . . . . . . . . 1–6
Solving Travel Connection Problems . . . . . . . . . . . . 1–7
Accessing Preinstalled Communication Software . . . . . 1–12
2 Connecting to a Network
Connecting a Network Cable . . . . . . . . . . . . . . . . . . . . . . 2–2
267639-001.book Page iii Friday, January 18, 2002 8:31 AM

Modem & Networking 1–1
1
Using an Internal Modem
Your notebook has an internal modem, an RJ-11 telephone jack,
preinstalled modem drivers, and a modem cable. The internal
modem:
■Supports applications running under Microsoft Windows 98,
Windows 2000 Professional, Windows XP Home, and
Windows XP Professional operating systems.
■Supports V.34 ITU (International Telecommunications
Union) analog modem recommendations for speeds up to
33.6 Kbps. Supports V.44 data compression algorithm.
■Supports V.90/V.92 ITU digital/analog modem pair
recommendations for speeds up to 56 Kbps.
The digital/analog modem pair rates allow faster downloads
only from compliant digital sources. Maximum achievable
download rates are currently unknown, may not reach
56 Kbps, and will vary with line conditions. Maximum
achievable upload rates are limited to 31.2 Kbps, may not
reach 31.2 Kbps, and will vary with line conditions.
■Uses a universal Direct Access Arrangement (DAA) that
supports multiple countries. An adapter may be required to
connect the modem to the standard telephone jack in some
countries.
■Does not support the modem pass-through connection
available on some optional port replicators.
267639-001.book Page 1 Friday, January 18, 2002 8:31 AM

1–2 Modem & Networking
Using an Internal Modem
Connecting the Modem Cable
Using the RJ-11 Cable
The modem cable may have noise suppression circuity that
prevents interference with TV and radio reception. The modem
cable must be connected to an analog telephone line.
ÄCAUTION: Jacks for digital PBX systems may resemble analog
telephone jacks, but are not compatible with the modem.
1. If the modem cable has noise suppression circuitry 1, orient
the circuitry end of the cable toward the computer.
2. Plug the cable into the RJ-11 telephone jack 2on the
notebook.
ÅWARNING: To reduce the risk of electrical shock, fire, or damage to
the equipment, do not plug a telephone cable into the RJ-45 jack.
267639-001.book Page 2 Friday, January 18, 2002 8:31 AM

Using an Internal Modem
Modem & Networking 1–3
3. Plug the modem cable into the RJ-11 telephone jack 3.
Connecting the modem using an RJ-11 jack
ÅWARNING: To reduce the risk of electrical shock, always ensure
that the modem line is disconnected from the telephone network
when opening the notebook’s enclosure.
267639-001.book Page 3 Friday, January 18, 2002 8:31 AM

1–4 Modem & Networking
Using an Internal Modem
Using a Country-Specific Modem Cable Adapter
Software for the internal modem supports multiple countries, but
telephone jacks vary by country. To use the modem and the RJ-11
cable outside the country in which you purchased the notebook,
you must obtain a country-specific modem adapter and define
your location in Dialing Properties.
To connect the modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. If the modem cable has noise suppression circuitry 1, orient
the circuitry end of the cable toward the notebook.
2. Plug the modem cable into the RJ-11 telephone jack 2on the
notebook.
3. Plug the country-specific modem adapter 3into the
telephone jack.
4. Plug the modem cable 4into the country-specific modem
adapter.
Connecting the modem using a country-specific modem
adapter
267639-001.book Page 4 Friday, January 18, 2002 8:31 AM

Using an Internal Modem
Modem & Networking 1–5
Viewing the Current Country Selection
To see the current country setting for your modem, follow
these steps:
Windows 98:
Select Start > Settings > Control Panel > Modems > Dialing
Properties. The current country selection appears in the
I Am In box.
Windows 2000 Professional:
1. Select Start > Settings > Control Panel.
2. Double-click the Regional Options icon.
3. Under Settings for the Current User, view the country that is
displayed under Your Locale.
Windows XP Home and XP Professional:
1. Select Start > Control Panel.
2. Double-click the Regional & Language Options icon.
3. Under Location, view your present location.
267639-001.book Page 5 Friday, January 18, 2002 8:31 AM

1–6 Modem & Networking
Using an Internal Modem
Adding New Locations When Travelling
The internal modem is configured to meet only the operating
standards in the country where you purchased the notebook.
When travelling internationally, you can add new location
configurations that comply with standards in other countries.
ÄCAUTION: Do not delete your current modem country settings. To
enable modem use in other countries while preserving your home
country configuration, add a new configuration for each location in
which you will use the modem.
The drop-down lists described below may include countries not
supported by the modem. Unless you select a supported country,
the country selection will default to USA or UK.
ÄCAUTION: Selecting a country other than the one in which it is
located may cause your modem to be configured in a way that
violates the telecommunications regulations/laws of that country.
In addition, your modem may not function properly if the correct
country selection is not made.
To add a new country location, follow these steps:
Windows 98:
1. Select Start > Settings > Control Panel.
2. Double-click the Modems icon > General tab > Select your
modem > Dialing Properties.
3. Assign the Location name (home, work, etc.).
4. Select the Country/Region from the drop-down list.
5. Click OK > OK.
Windows 2000 Professional:
1. Select Start > Settings > Control Panel.
2. Double-click the Phone and Modem Options icon >
Select New.
267639-001.book Page 6 Friday, January 18, 2002 8:31 AM

Using an Internal Modem
Modem & Networking 1–7
3. Assign the New Location Name (home, work, etc.).
4. Select the Country/Region from the drop-down list.
5. Click OK > OK.
Windows XP Home and XP Professional:
1. Select Start > Control Panel.
2. Double-click the Network and Internet Connections icon.
3. Select Phone and Modem Properties (menu in the left
column) > Dialing Rules tab.
4. Select the New button and assign it a name (home,
work, etc.).
5. Select the Country/Region from the drop-down list.
6. Click OK > OK.
Solving Travel Connection Problems
If you experience connection problems while using the modem
outside your home country, the following suggestions may help:
■Check the telephone line type
The modem requires an analog, not a digital, telephone line.
A line described as a PBX line is usually a digital line. A
telephone line described as a data line, fax machine line,
modem line, or standard telephone line, is probably an
analog line.
267639-001.book Page 7 Friday, January 18, 2002 8:31 AM

1–8 Modem & Networking
Using an Internal Modem
■Check for pulse or tone dialing
Dial a few digits on the telephone and listen for clicks
(pulses) or tones. Then select:
Windows 98:
1. Select Start > Settings > Control Panel.
2. Double-click the Modems icon > General tab.
3. Select your modem > Dialing Properties > Tone or
Pulse Dialing.
4. Select OK > OK.
Windows 2000 Professional:
1. Select Start > Settings > Control panel.
2. Double-click the Phone and Modem Options icon.
3. Select your location > Edit > Tone or Pulse Dialing.
4. Select OK > OK.
Windows XP Home and XP Professional:
1. Select Start > Control Panel.
2. Double-click the Network and Internet Connections
icon > Phone and Modem Properties (menu in the left
column).
3. Select the Dialing Rules tab.
4. Select your location.
5. Select Edit > Tone or Pulse Dialing.
6. Select OK > OK.
267639-001.book Page 8 Friday, January 18, 2002 8:31 AM

Using an Internal Modem
Modem & Networking 1–9
■Check the telephone number you are dialing and the
response of the remote modem
Dial the telephone number on the telephone, wait for the
remote modem to answer, then hang up.
■Set the modem to ignore dial tones
If the modem receives a dial tone it does not recognize, it will
not dial and will display a No Dial Tone error message. Use
the following procedures to set the modem to ignore all dial
tones before dialing:
Windows 98:
1. Select Start > Settings > Control Panel.
2. Double-click the Modems icon > Select your modem.
3. Select Properties > Connection tab > Clear the Wait for
Dial Tone Before Dialing check box.
4. If you continue to receive the No Dial Tone error
message after clearing the check box:
a. Select Start > Settings > Control Panel >
Double-click Modem > Dialing Properties.
b. Select your location in the I Am In drop-down box.
c. Clear the Wait for Dial Tone Before Dialing
check box.
Windows 2000 Professional:
1. Select Start > Settings > Control Panel.
2. Double-click the Phone and Modem Options icon >
Modem tab.
3. Select your modem.
4. Select Properties > General tab.
267639-001.book Page 9 Friday, January 18, 2002 8:31 AM

1–10 Modem & Networking
Using an Internal Modem
5. Clear the Wait for Dial Tone Before Dialing check box.
6. If you continue to receive the No Dial Tone error
message after clearing the check box:
a. Select Start > Settings > Control Panel > Phone and
Modems Options icon.
b. Select the Dialing Rules tab.
c. In the Locations list, select the location from which
you are dialing.
d. Select Edit.
e. Select your location from the drop-down list in the
Country/Region box.
f. Select Apply > OK.
g. Select the Modem tab.
h. Select your modem.
i. Select Properties > General tab.
j. Clear the Wait for Dial Tone Before Dialing
check box.
267639-001.book Page 10 Friday, January 18, 2002 8:31 AM

Using an Internal Modem
Modem & Networking 1–11
Windows XP Home and XP Professional:
1. Select Start > Control Panel > Network and Internet
Connections icon.
2. Select Phone and Modem Properties (menu in the left
column) > Modem Tab.
3. Select your modem > Properties > Modem tab.
4. Clear the Wait for Dial Tone Before Dialing check box.
5. If you continue to receive the No Dial Tone error
message after clearing the check box:
a. Select Start > Control Panel > Network and Internet
Connections icon.
b. Select Phone and Modem Properties (menu in the left
column).
c. Select the Dialing Rules tab.
d. Select your location > Edit.
e. Select your location from the drop-down list in the
Country/Region box.
f. Select Apply > OK.
7. Select the Modem tab.
8. Select your modem > Properties.
9. Clear the Wait for Dial Tone Before Dialing check box.
267639-001.book Page 11 Friday, January 18, 2002 8:31 AM

1–12 Modem & Networking
Using an Internal Modem
Accessing Preinstalled Communication
Software
To use preinstalled modem software for terminal emulation and
data transfer, follow these steps:
Windows 98:
Select Start > Programs > Accessories > HyperTerminal.
Windows 2000 Professional:
1. Start > Programs > Accessories > Communications.
2. Select the appropriate terminal emulation program or internet
connection wizard.
Windows XP Home or Windows XP Professional:
1. Start > All Programs > Accessories > Communications.
2. Select the appropriate fax or terminal emulation program or
internet connection wizard.
267639-001.book Page 12 Friday, January 18, 2002 8:31 AM

Modem & Networking 2–1
2
Connecting to a Network
Your notebook has an RJ-45 network jack, an internal NIC
(network interface card), preinstalled network drivers, and may
have a network cable.
✎Networking requiring connection to domains is not supported in
Windows XP Home Edition.
Your notebook supports:
■Network speeds up to 10 Mbps when connected to a 10BaseT
network and 100 Mbps when connected to a 100BaseTX
network.
■Can be connected to a network whether or not the internal
modem is connected to a telephone line.
■56bitDES or 3DES or “null” encryption with MD5 or SHA-1
integrity.
■IPSec Authentication Header (AH) transform algorithms:
MD5 and SHA-1.
✎If your notebook is connected to a network, you may want to
confer with your network administrator before changing network
settings.
267639-001.book Page 1 Friday, January 18, 2002 8:31 AM

2–2 Modem & Networking
Connecting to a Network
Connecting a Network Cable
A network cable has an 8-pin RJ-45 network connector at each
end and may contain noise suppression circuitry, which prevents
interference with TV and radio reception.
1. Orient the end of a network cable with noise suppression
circuitry 1toward the RJ-45 network jack on the notebook.
2. Plug the network cable into the RJ-45 network jack 2on the
notebook.
3. Plug the other end of the cable into an RJ-45 network jack 3.
4. Start or restart the notebook.
5. Connect to the network.
Connecting a network cable
267639-001.book Page 2 Friday, January 18, 2002 8:31 AM