HP Elite Dragonfly Assembly instructions

EL-MF877-00 Page 1
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP Elite Dragonfly Notebook PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Notes
Quantity of
items
included in
product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries, excluding Li-Ion batteries.
All types including standard alkaline, coin or button style
batteries
1
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Battery(ies) are attached to the product by (check all
that apply with an “x” inside the “[ ]”):
[X] screws
[ ] snaps
[ ] adhesive
[ ] other. Explain
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
0
External electrical cables and cords
DC Cable for External Power Supply
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
0

EL-MF877-00 Page 2
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Item Description
Notes
Quantity of
items
included in
product
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing refractory
ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Electric screwdriver (Cross)
Cross, #1
Screwdriver #2
Screwdriver #3
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
9.
10.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY
MODEL : Empire
制表： 朱亚审核：赵承阳
1.00
Station Version Station Version Station Version Station Version Station Version Station Version
1 1.00 9 1.00 17 1.00 25 1.00
2 1.01 10 1.00 18 1.00 26 1.00
3 1.00 11 1.00 19 1.00 27 1.00
4 1.00 12 1.00 20 1.00 28 1.00
5 1.00 13 1.00 21 1.00
6 1.00 14 1.00 22 1.00
7 1.00 15 1.00 23 1.00
8 1.00 16 1.00 24 1.00
Station
Ver.
ALL 1.**
2 1.01
Sub-assembly name:
Empire FA 拆机 SOP
Document No.:
Empire FA 拆机 SOP
A.Current station version list:
B.Version Modify list:
Written by:
翁信茂
Revision:
Date:
2019/9/18
Design
1 of 32
Page:
Content
Date
首份SOP製作
夏宗全
2019/8/20
2019/9/18
内容更新
夏宗全

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
Loose srew from the buttom case
1. Loose T5 Screw (6052B0473701) *5 from the bottom case。
Torque value：2.0 ±0.1Kgf．cm
The screw cannot be slipped
1(1/1)
Cross electric low speed screwdriver T5 1
1
2
3
4
5
2019/8/20
1.00

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
Remove the Top case & Bottom case
1. Absorb the icon area with suction cup, and disassemble from the upper left corner/ Upper
side
2. Follow the arrow and queue 1-2-3，disassemble upper side and left/right side
Absorb the icon area with suction cup , be care the middle hook, avoid destroy the bottom
case
3. Base on the bottom side , disassemble C case and bottom case Rotatingly.
4. Recycle the bottom case（6070B1587501）
2(1/1)
Note: Absorb lightly,
avoid destroy the
bottom case
icon area
suction cup 1
2019/9/18
1.01
Pull the bottom case lightly
from upper side ,separate
the hook between C case
and bottom case
1 Suction cup absorb & disassemble upper side hook
2
3 3
Key station

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
Loose Battery screw
3(1/1)
Cross electric low speed screwdriver #0 1
1. Loose screw M2 x 3L (6052B0185401) * 5 。
Torque value1.5 ±0.2Kgf．Cm
The screw cannot be slipped and should not fall into the machine
3 5
1
4
2
2019/8/20
1.00

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
1. Loose battery screw(6052B0185401) 1、2、3、4
Torque value1.5 ±0.2Kgf．Cm
The screw cannot be slipped and should not fall into the machine.
2. Disassemble battery CNTR, Recycle battery
Pull out the CNTR horizontally
3. Recycle K-LOCK（6053B1668401）
4(1/1)
Loose screw , disassemble battery
Cross electric low speed screwdriver #0 1
1
2
3
4
6027B0160901 4cell,56W
6027B0160601 4cell,56W
6027B0162901 2cell,38W
K-lock
2019/8/20
1.00

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
5(1/1)
Remove gasket，Disassemble WWAN
FOR WWAN model
1.Remove gasket（6054B2006001）*2
2. Disassemble WWAN tip
图一
图二
2019/8/20
1.00

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
Disassemble shielding，Remove WWAN cable
6(1/1)
1.Disassemble MB ZIF Shielding(6053B1667501)&WWAN ZIF shielding(6053B1668101) ,and
Recycle them
2.Follow the arrow ，Disassemble the WWAN cable until the MB location
MB ZIF Shielding
6053B1667501 WWAN ZIF Shielding
6053B1668101
FOR WWAN model
Disassemble point
Disassemble point
2019/8/20
1.00

SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step：
Attention︰Pls inform the OP assistant immediately once there is any abnormal
Editor：
Publish：
Zhu Ya IE
Disassemble the Fan 7(1/2)
1. Take out the SET screw* 3 (Picture1)。
Screwdriver #0
Twisting force value ：1.5 ±0.1 Kg/cm
Make sure the screw can’t loose
2. Disassemble FAN cable CNTR（Picture 2）
3. Recycle FAN(excel 1) 。
1
2
3
Picture 1
Screwdriver 0# 1
Vendor PN
Sunon 6033B0073001（normal）
Delta 6033B0072801 （normal）
Delta Titanium 6033B0072701（light）
Excel 1
Avoid
BOSS
pillar Picture 2
2019/8/20
1.00