HP HC240 Healthcare Installation instructions

EL-MF877-00 Page 1
Template Revision A
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP HC240 Healthcare 24-inch Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Function key BD, IF BD, POWER BD
3
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps Panel
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Power BD only (C805)
1
External electrical cables and cords
USB cable, Mini Display cable, Display cable,
Power cord
4
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0

EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 SCREW DRIVER(PHILLIPS HEAD)
#0
Description #2 SCREW DRIVER(PHILLIPS HEAD)
#1
Description #3 SCREW DRIVER(PHILLIPS HEAD)
#2
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove Stand Base From Display Head
2. Remove Rear Cover From Display Head
3. Remove Bracket Assy From Display Head
4. Remove Mid cover From Display Head
5. Remove Front Cover From Display Head
6. Disassemble Front Cover
7. Disassemble Bracket ASSY
8. Disassemble Stand ASSY
9. Disassemble Panel ASSY
10.
11.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

HP HC240 Disassembly Process
Steve Chou
Mechanical Engineer
August-18-2016

2
External Electric Cables Dissecting Process
1.Remove Cable From Display Head.

3
Remove Stand Base From Display Head
4.Remove Stand Base From Display Head.
3. Pull the release button

4
6.Remove Rear Cover From Display Head.
Remove Rear Cover From Display Head
5.Remove four wall mount screws from
display head .

5
Remove Bracket from Display Head
7. Remove AL ,tape,internal cable
8.Remove screw

6
Remove Mid-cover from head
9. Remove screw

7
FC
Power Button
Function key
Remove front cover from head
10.Remove front cover from head

8
FC
Power Button
Function key
Disassemble front cover
11.Remove function key and Mylar