HP M042K0 User manual

Filename: m3adopm.doc Title: Addendum [3-column 1 or 2 pages]
Template: HP-Print2K.dot Author: WASSER Studios Last Saved By: JimL
Revision #: 14 Page: 1 of 2 Printed: 04/30/03 02:16 PM
Regulatory Information
Declaration of Conformity
According to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Manufacturer’s Address: 10500 Ridgeview Ct.
Cupertino, CA 95015-4010
USA
declares that the product
Product Name: PS/2 Optical Mouse
Model Number(s): M042K0
Part Number: 5187-2155
Product Options: All
conforms to the following Product Specifications:
Safety: EN 60950:1992 + A1, A2, A3, A4, A11
EMC: FCC Title 47 CFR, Part 15 Class B2)
Supplementary Information:
1) The Product was tested in a typical configuration with Hewlett-Packard
Personal Computer and peripherals.
2) This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Hardware Quality Engineering Manager
Cupertino, CA, USA June, 2003
For Regulatory Compliance Information ONLY, contact:
North America
Contact:
Hardware Quality Engineering Manager
Hewlett-Packard, CPC
10500 Ridgeview Ct.
Cupertino, CA 95015-4010
USA
(Phone: [phone])
Using the Optical Mouse

Filename: m3adopm.doc Title: Addendum [3-column 1 or 2 pages]
Template: HP-Print2K.dot Author: WASSER Studios Last Saved By: JimL
Revision #: 14 Page: 2 of 2 Printed: 04/30/03 02:16 PM
Using the Optical Mouse
Your optical mouse uses a light, instead of a roller
ball, to sense movement. Use the optical mouse on
an opaque surface.
Important: The optical mouse does not work on a glass,
translucent, or reflective surface.
To Install the Optical Mouse
1 Turn off the PC.
2 Plug the optical mouse cable to the green
connector for the mouse on the back of
the PC.
3 Turn on the PC. Your mouse can now be used.
Note: The PC doesn’t recognize the mouse if you connect
it when the PC is on. You must restart the PC after
connecting the optical mouse.