HP 2533t - Compaq Mobile Thin Client User manual

Getting Started
HP 2533t Mobile Thin Client
Document Part Number: 462939-001
May 2008
This guide explains how to set up your hardware and begin using
the computer in Windows® XPe.
462939-001.book Page i Thursday, March 20, 2008 9:03 AM

© Copyright 2008 Hewlett-Packard Development Company, L.P.
Windows is a U.S. registered trademark of Microsoft Corporation.
ENERGY STAR is a registered mark owned by the U.S. government. Intel
is a trademark of Intel Corporation in the U.S. and other countries. Java is a
U.S. trademark of Sun Microsystems, Inc.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Getting Started
HP 2533t Mobile Thin Client
First Edition: May 2008
Document Part Number: 462939-001
Product notice
This user guide describes features that are common to most models. Some
features may not be available on your computer.
462939-001.book Page ii Thursday, March 20, 2008 9:03 AM

Getting Started iii
Contents
Basic setup
Unpack the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Insert the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connect the computer to external power. . . . . . . . . . . . . . . . . . . . . . 2
Open the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Turn on the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Enter your logon information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connect to a computer network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Begin managing your network (network administrators only) . . . . . 6
Quick tour
Identifying the hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting
Quick troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Product information
Safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Important display information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Regulatory, safety, and environmental notices . . . . . . . . . . . . . . . . 22
Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Rated input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
462939-001.book Page iii Thursday, March 20, 2008 9:03 AM

462939-001.book Page iv Thursday, March 20, 2008 9:03 AM

Getting Started 1
Basic setup
Your computer is designed for use in a business setting. The instructions provided
here are general guidelines. Contact your network administrator if you have
additional questions about your computer or your company network.
✎If you have already unpacked the box and set up your computer, go to step 6,
“Enter your logon information,” to begin using your computer.
✎Computer color, features, and options may vary by computer model.
1Unpack the box
Component Component
1Power cord* 3Battery*
2AC adapter
*Batteries and power cords vary in appearance by region and country.
462939-001.book Page 1 Thursday, March 20, 2008 9:03 AM

2Getting Started
Basic setup
ÅWARNING: To reduce potential safety issues, use only the AC adapter or battery
provided with the computer, a replacement AC adapter or battery provided by HP, or
a compatible AC adapter or battery purchased separately as an accessory from HP.
2Insert the battery
3Connect the computer to external power
462939-001.book Page 2 Thursday, March 20, 2008 9:03 AM

Basic setup
Getting Started 3
ÅWARNING: To reduce the risk of electric shock or damage to your equipment,
observe these practices:
■Plug the power cord into an AC outlet that is easily accessible at all times.
■Disconnect power from the computer by unplugging the power cord from the AC
outlet (not by unplugging the power cord from the computer).
■If provided with a 3-pin attachment plug on your power cord, plug the cord into
a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin,
for example, by attaching a 2-pin adapter. The grounding pin is an important
safety feature.
Leave the computer connected to external power until the battery is fully charged
and the battery light turns off.
4Open the computer
462939-001.book Page 3 Thursday, March 20, 2008 9:03 AM

4Getting Started
Basic setup
T
✎If the computer will not start up, plug the computer into AC power and be sure
that the power cord and AC adapter connections are secure.
To turn off the computer:
1. Save your work, and close all programs.
2. Click Start, click Turn Off Computer, and then click Turn Off.
If you have been registered to a network domain, the button you click will be called
Shut Down instead of Turn Off Computer.
End users will typically follow the manual logon steps. Consult your network
administrator for instructions.
✎For additional security, network administrators can use HP Logon Manager to
disable and reenable automatic logon and to change the automatic logon user
name, password, and domain. For details, refer to the HP Mobile Thin Client
reference guides on the Web.
5Turn on the computer
6Enter your logon information
462939-001.book Page 4 Thursday, March 20, 2008 9:03 AM

Basic setup
Getting Started 5
Automatic logon
The factory setting for the computer is automatic logon.
✎Only the network administrator can change automatic logon properties.
With automatic logon, the Log On to Windows dialog box is bypassed, which
brings you directly to the Windows desktop. So, to log on as a different user, follow
these steps:
1. Press and hold down the left Shift key, and then click Start.
2. Click Shut Down, and then click Log Off.
The Log On to Windows dialog box opens, allowing you to manually enter
the logon information.
Manual logon
If the automatic logon is disabled by the network administrator, log on as follows:
1. In the Log On to Windows dialog box, type your information in the User
Name and Password boxes.
❏For a user, the initial user name and password are both User.
❏For an administrator, the initial user name and password are both
Administrator.
2. Click OK.
Note the following considerations:
■To prevent unauthorized access to your information, change your password as
soon as possible after setup.
■Passwords are case sensitive, but user names are not.
Administrator logon
To access the administrator logon screen in either automatic or manual logon mode:
1. Hold down the left Shift key, and then click Start.
2. Click Shut Down, and then click Log Off.
The Administrator logon screen is displayed.
You can use the HP Logon Manager to permanently modify the default user mode.
For details, refer to the administrator’s guide on the Web.
462939-001.book Page 5 Thursday, March 20, 2008 9:03 AM

6Getting Started
Basic setup
The computer may have the following networking features:
■Modem
■Local area network (LAN)
■Wireless local area network (WLAN)
If you plan to connect the computer to a home office LAN or WLAN, refer to the
HP Mobile Thin Client reference guides on the Web for information on
networking. If you need assistance to connect to a company LAN or WLAN, or
information on remote access, contact your network administrator.
✎The computer display must be open, and the antennae free from obstruction,
before you can connect to a wireless network.
Your computer ships with a current release of Altiris Deployment Solution, a
leading-edge tool to assist you with quick deployment and on-going management
of computers in your organization. Altiris Deployment Solution provides the
capability of deploying new images by HP or created by you, updating drivers, and
managing patches. For more information on Altiris Deployment Solution, go to
http://www.Altiris.com/products/developmentsol.
To begin managing the computer, follow these steps:
1. Register the software at the Altiris registration Web site:
http://www.altiris.com/hptc
✎Links to the software, user guides, and online training are provided
when you register on the Altiris Web site.
2. Download the Deployment Solution console.
3. Follow the instructions in the Deployment Solution product guide from Altiris
to install and configure the Deployment Solution on a server:
http://www.altiris.com/support/documentation
7Connect to a computer network
8Begin managing your network
(network administrators only)
462939-001.book Page 6 Thursday, March 20, 2008 9:03 AM