HP BL20p - ProLiant - G2 Operating and safety instructions

HP ProLiant BL20p Generation 2 Server
Blade
Setup and Installation Guide
August 2003 (Second Edition)
Part Number 307158-002
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

© 2003 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows NTare U.S. registered trademarks of Microsoft
Corporation.
Inteland Pentiumare registered trademarks of Intel Corporation in the U.S. and other
countries and are used under license.
Javais a U.S. trademark of Sun Microsystems, Inc.
UNIXis a registered trademark of The Open Group.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions
contained herein. The information in this document is provided “as is” without warranty of
any kind and is subject to change without notice. The warranties for HP products are set forth
in the express limited warranty statements accompanying such products. Nothing herein
should be construed as constituting an additional warranty.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
August 2003 (Second Edition)
Part Number 307158-002
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

Contents
About This Guide
Audience Assumptions...................................................................................................... ix
Important Safety Information ............................................................................................ ix
Symbols on Equipment ..................................................................................................... ix
Rack Stability .................................................................................................................... xi
Symbols in Text.................................................................................................................xi
Related Documents........................................................................................................... xii
Getting Help ..................................................................................................................... xii
Technical Support ...................................................................................................... xii
HP Website ............................................................................................................... xiii
Authorized Reseller .................................................................................................. xiii
Reader’s Comments ........................................................................................................ xiii
Chapter 1
Installing the Server Blade and Options
Preparation Procedures.................................................................................................... 1-2
Accessing Internal Server Blade Components.......................................................... 1-2
Identifying System Board Components .................................................................... 1-6
Memory ........................................................................................................................... 1-7
DIMM Installation Guidelines.................................................................................. 1-7
Installing DIMMs ..................................................................................................... 1-8
Battery-Backed Write Cache Enabler ........................................................................... 1-10
Dual Port Fibre Channel Mezzanine Card..................................................................... 1-14
Hot-Plug SCSI Hard Drives and Blanks ....................................................................... 1-17
Removing Hard Drive Blanks................................................................................. 1-17
SCSI ID Numbers ................................................................................................... 1-18
Replacing Hot-Plug SCSI Hard Drives................................................................... 1-18
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide iii
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

Contents
Processors, Heatsinks, and PPMs ..................................................................................1-20
Replacing a Processor and Heatsink .......................................................................1-20
Replacing a Processor Power Module.....................................................................1-25
Server Blades .................................................................................................................1-25
Installing a Server Blade .........................................................................................1-26
Powering Up the Server Blade ................................................................................1-28
Using the Diagnostic Cable or the Local I/O Cable.......................................................1-29
Identifying Diagnostic and I/O Cable Connectors ..................................................1-29
Connecting the Diagnostic Cable or the I/O Cable .................................................1-31
Chapter 2
Configuring and Deploying Server Blades
Configuration and Deployment Overview.......................................................................2-1
ProLiant Essentials Rapid Deployment Pack...................................................................2-2
CD-ROM Deployment.....................................................................................................2-3
Using the CD-ROM ..................................................................................................2-3
Diskette Image Deployment ............................................................................................2-5
Creating the Boot Diskette ........................................................................................2-5
Using the Boot Diskette ............................................................................................2-6
SAN Configuration Overview .........................................................................................2-7
Software and Utilities ......................................................................................................2-8
Integrated Lights-Out Advanced Management .........................................................2-9
Redundant ROM Support........................................................................................2-12
Remote ROM Flash.................................................................................................2-13
ROMPaq Utility ......................................................................................................2-14
ROM-Based Setup Utility .......................................................................................2-14
Option ROM Configuration for Arrays Utility .......................................................2-16
PXE Deployment.....................................................................................................2-17
SmartStart Scripting Toolkit ...................................................................................2-19
Insight Manager 7....................................................................................................2-20
Diagnostics Utility...................................................................................................2-21
Automatic Server Recovery-2 .................................................................................2-22
Integrated Management Log ...................................................................................2-22
Appendix A
Regulatory Compliance Notices
Regulatory Compliance Identification Numbers ............................................................ A-1
Federal Communications Commission Notice ............................................................... A-1
iv HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

Contents
Modifications ........................................................................................................... A-1
Cables....................................................................................................................... A-2
Canadian Notice (Avis Canadien) .................................................................................. A-2
European Union Notice .................................................................................................. A-2
Japanese Notice .............................................................................................................. A-2
Korean Notice................................................................................................................. A-3
BSMI Notice................................................................................................................... A-3
Battery Replacement Notice........................................................................................... A-3
Appendix B
Electrostatic Discharge
Preventing Electrostatic Damage ....................................................................................B-1
Grounding Methods.........................................................................................................B-2
Appendix C
Server Error Messages
Appendix D
Troubleshooting
When the Server Blade Does Not Start .......................................................................... D-1
Server Blade Diagnostic Steps................................................................................. D-4
System Configuration Switch Procedures.............................................................. D-11
Problems After Initial Boot .......................................................................................... D-14
Appendix E
LEDs and Switches
LEDs................................................................................................................................E-1
Server Blade Front Panel ..........................................................................................E-1
Hot-Plug SCSI Hard Drive .......................................................................................E-3
System Switches .......................................................................................................E-7
Appendix F
Specifications
ProLiant BL20p Generation 2 Server Blade.................................................................... F-1
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide v
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

Contents
Appendix G
System Battery
System Board Battery Replacement ............................................................................... G-1
Index
List of Figures
1-1 Removing a server blade ...........................................................................................1-4
1-2 Removing the access panel........................................................................................1-5
1-3 System board components and connectors................................................................1-6
1-4 Installing a DIMM.....................................................................................................1-9
1-5 Removing the Smart Array 5i Plus Controller module ...........................................1-10
1-6 Cabling the Smart Array 5i Plus Controller module ...............................................1-11
1-7 Installing the Smart Array 5i Plus Controller..........................................................1-11
1-8 Installing the Battery-Backed Write Cache Enabler ...............................................1-12
1-9 Cabling the Battery-Backed Write Cache Enabler..................................................1-13
1-10 Removing the standard NIC module .......................................................................1-15
1-11 Installing the FC mezzanine card ............................................................................1-16
1-12 Removing a hard drive blank ..................................................................................1-17
1-13 Removing a hot-plug SCSI hard drive ....................................................................1-19
1-14 Unlatching the processor locking levers..................................................................1-20
1-15 Removing the processor ..........................................................................................1-21
1-16 Installing a processor...............................................................................................1-22
1-17 Removing the thermal interface media cover..........................................................1-23
1-18 Installing a heatsink.................................................................................................1-24
1-19 Removing a PPM ....................................................................................................1-25
1-20 Removing a server blade blank ...............................................................................1-26
1-21 Installing a server blade...........................................................................................1-27
1-22 I/O cable with large view of the I/O icon................................................................1-29
1-23 Connectors...............................................................................................................1-30
1-24 Connecting an RJ-45 network cable........................................................................1-32
1-25 Connecting either the diagnostic cable (1) or the I/O cable (2) to a server blade ...1-33
1-26 Directly accessing a configured server blade ..........................................................1-35
1-27 Directly connecting to the server blade using a USB hub.......................................1-37
E-1 ProLiant BL20p G2 server blade front panel LEDs................................................. E-2
E-2 Hot-plug SCSI hard drive LEDs .............................................................................. E-4
E-3 Power On/Standby button ........................................................................................ E-7
vi HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

Contents
E-4 Server blade switches................................................................................................E-8
G-1 Battery holder .......................................................................................................... G-2
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide vii
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

About This Guide
This guide provides step-by-step instructions for installation and reference
information for operation, troubleshooting, and future upgrades for the HP
ProLiant BL20p Generation 2 server blade.
Audience Assumptions
This guide is intended for network administrators and IT personnel who install,
configure, and troubleshoot system hardware and software.
Important Safety Information
Before installing this product, read the Important Safety Information document
included with the server.
The installation and maintenance of this equipment may involve access to
high-power circuitry and must be performed by trained service personnel familiar
with these conditions. This equipment is intended to be installed in restricted areas,
such as equipment closets and data centers, where only trained service personnel are
permitted to operate and service the equipment.
Symbols on Equipment
The following symbols may be placed on equipment to indicate the presence of
potentially hazardous conditions:
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide ix
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

About This Guide
WARNING: This symbol, in conjunction with any of the following symbols,
indicates the presence of a potential hazard. The potential for injury exists if
warnings are not observed. Consult the documentation for specific details.
This symbol indicates the presence of hazardous energy circuits or electric
shock hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure. Refer all maintenance, upgrades, and servicing to
qualified personnel.
This symbol indicates the presence of electric shock hazards. The area
contains no user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not
open this enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into this
receptacle.
This symbol indicates the presence of a hot surface or hot component. If this
surface is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
These symbols, on power supplies or systems, indicate that the
equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock,
remove all power cords to completely disconnect power from the
system.
Weight in kg
Weight in lb
This symbol indicates that the component exceeds the recommended
weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety requirements
and guidelines for manual material handling.
x HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

About This Guide
Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if
more than one component is extended for any reason.
Symbols in Text
These symbols may be found in the text of this guide. They have the following
meanings.
WARNING: Text set off in this manner indicates that failure to follow directions
in the warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents essential information to explain a concept
or complete a task.
NOTE: Text set off in this manner presents additional information to emphasize or supplement
important points of the main text.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide xi
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

About This Guide
Related Documents
For additional information on the topics covered in this guide, refer to the following
documentation:
• HP ProLiant BL p-Class System Setup and Installation Guide
• HP ProLiant BL p-Class System Maintenance and Service Guide
• HP ProLiant BL p-Class System Hardware Installation and Configuration Poster
• HP ProLiant Servers Troubleshooting Guide
• HP Integrated Lights-Out User Guide
• ROM-Based Setup and Utility User Guide
• White paper: HP ProLiant BL p-Class System Overview and Planning
• HP ProLiant BL20p Generation 2 Server Blade QuickSpecs
• HP StorageWorks Booting Windows Systems from a Storage Area Network
Getting Help
If you have a problem and have exhausted the information in this guide, you can get
further information and other help in the following locations.
Technical Support
In North America, call the HP Technical Support Phone Center at 1-800-652-6672.
This service is available 24 hours a day, 7 days a week. For continuous quality
improvement, calls may be recorded or monitored. Outside North America, call the
nearest HP Technical Support Phone Center. Telephone numbers for worldwide
Technical Support Centers are listed on the HP website, www.hp.com.
For a complete list of information that should be available before you call, refer to
the HP ProLiant Servers Troubleshooting Guide on the documentation CD.
xii HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

About This Guide
HP Website
The HP website has information on this product as well as the latest drivers and flash
ROM images. You can access the HP website at www.hp.com.
Authorized Reseller
For the name of the nearest authorized reseller:
• In the United States, call 1-800-345-1518.
• In Canada, call 1-800-263-5868.
• Elsewhere, see the HP website for locations and telephone numbers.
Reader’s Comments
HP welcomes your comments on this guide. Please send your comments and
suggestions by e-mail to [email protected].
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide xiii
HP CONFIDENTIAL
Writer: Amy Clute File Name: a-frnt.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:05 PM

1
Installing the Server Blade and Options
This chapter provides installation procedures for an HP ProLiant BL20p Generation 2
Server Blade. For additional installation information, refer to:
•
•
Labels attached to the server blade access panel
Documentation that ships with each option kit
To streamline the installation process, read the installation instructions for all the
hardware options and identify similar steps before installing the hardware.
If you encounter any problems during installation, contact an HP authorized reseller.
WARNING: To reduce the risk of personal injury or damage to equipment,
heed all warnings and cautions throughout the installation instructions.
IMPORTANT: Before installing server blades for the first time, define the hardware
configuration and server blade deployment process. Refer to Chapter 2, “Configuring and
Deploying Server Blades.”
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide 1-1
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
Preparation Procedures
To install server blade options, you may need to:
1. Access internal server blade components.
a. Shut down the operating system and power down the server blade.
b. Remove the server blade from the server blade enclosure.
c. Remove the access panel.
2. Identify the system board components.
WARNING: To reduce the risk of electric shock, do not power up the server
blade with the access panel removed.
3. Install server blade options.
4. Reinstall the access panel.
Accessing Internal Server Blade Components
To access internal server blade components, you must remove the access panel.
Observe the following warnings and cautions.
WARNING: To reduce the risk of electric shock, do not power up the server
blade with the access panel removed.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
CAUTION: Electrostatic discharge can damage electronic components. Properly
ground yourself before beginning any installation procedure. Refer to Appendix B,
“Electrostatic Discharge,” for more information.
1-2 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
To access internal server blade components:
IMPORTANT: If the server blade is not installed in the server blade enclosure or is not
receiving power through the diagnostic station, begin with step 4.
1. Identify the proper server blade in the server blade enclosure.
2. Remove power from the server blade in one of the following ways:
— Use the virtual power button feature in the iLO remote console to power
down the server blade from a remote location. Be sure that the server blade is
in standby mode by observing that the power LED is amber. For iLO
information and procedures, refer to the Integrated Lights-Out User Guide.
— Press the Power On/Standby button on the front of the server blade. Be sure
that the server blade is in standby mode by observing that the power LED is
amber.
CAUTION: After you press the release button, the server blade is unlocked from
the server blade enclosure. Use both hands to support the server blade when
you remove it from the rack.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide 1-3
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
3. Remove the server blade from the server blade enclosure:
a. Press the release button (1).
b. Open the release lever (2).
c. Grasp the lever and slide the server blade from the server blade enclosure (3).
Place a hand under the server blade to support it as you remove it from the
server blade enclosure.
Figure 1-1: Removing a server blade
1-4 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
4. Place the server blade on a flat, level surface.
5. Remove the access panel:
WARNING: To reduce the risk of electric shock, do not power up the server
blade with the access panel removed.
a. Loosen the thumbscrew on the rear of the server blade (1).
b. Slide the access panel about 1 cm (3/8 in) toward the rear of the unit and lift
the panel to remove it (2).
Figure 1-2: Removing the access panel
To install the access panel, reverse step 5.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide 1-5
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
Identifying System Board Components
Use Figure 1-3 and Table 1-1 to identify the system board components and
connectors.
Figure 1-3: System board components and connectors
Table 1-1: System Board Components and Connectors
Item Description
1 Smart Array 5i Plus Controller
2 Standard NIC module (shown) or FC mezzanine
card
3 DC filter module
4 DC to DC power converter
5 DIMM slots (4)
6 Battery
7 Processor power module slot 1
8 System Maintenance Switch (SW4)
continued
1-6 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM

Installing the Server Blade and Options
Table 1-1: System Board Components and Connectors continued
Item Description
9 System Switch (SW3)
10 System Configuration Switch (SW1)
11 Processor socket 1 (populated)
12 Fan connectors
13 Power button/LED board connector*
14 SCSI backplane board connector
15 Processor socket 2
16 Processor power module slot 2
17 Optional Battery-Backed Write Cache Enabler
*Depending on the configuration and model, this item may not
be found on your system board.
Memory
You can expand system memory by installing synchronous DDR DIMMs. A
ProLiant BL20p G2 server blade supports up to four PC2100 ECC registered DDR
SDRAM DIMMs.
DIMM Installation Guidelines
You must observe the following guidelines when installing additional memory:
•
•
•
Install only PC2100 registered DDR, 3.3-V, 72-bit wide, ECC DIMMs in the
server blade.
Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A.
Populate both slots in a bank at the same time: DIMMs 1 and 2 reside in bank A,
and DIMMs 3 and 4 reside in bank B.
NOTE: The server blade ships with at least two DIMMs installed in DIMM slots 1A
and 2A.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide 1-7
HP CONFIDENTIAL
Writer: Amy Clute File Name: b-ch1 Installing the Server Blade and Options.doc
Codename: Nipper Part Number: 307158-002 Last Saved On: 9/8/03 2:09 PM