HP Integrity BL860c Instruction Manual

HP System Management Homepage
Release Notes
HP-UX, Linux, and Windows Systems
HP Part Number: 466303-003
Published: March 2009
Edition: 3

© Copyright 2004 - 2009 Hewlett-Packard Development Company, L.P.
Legal Notices
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Trademark Notices
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
HP-UX Release 10.20 and later and HP-UX Release 11.00 and later (in both 32 and 64-bit configurations) on all HP 9000 computers are Open
Group UNIX 95 branded products.
Intel and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
Red Hat® is a registered trademark of Red Hat, Inc. in the United States and other countries.
SUSE® is a registered trademark of SUSE Linux AG.
UNIX is a registered trademark of The Open Group.

Table of Contents
About this document......................................................................................7
Intended audience..................................................................................................................................7
New and changed information in this edition.............................................................................................7
March 2009 release for HP-UX............................................................................................................7
January 2009 release for Linux and Windows.......................................................................................7
Typographic conventions..........................................................................................................................8
Related information.................................................................................................................................9
HP SMH documentation......................................................................................................................9
HP-UX documentation.......................................................................................................................10
Publishing history..................................................................................................................................10
HP encourages your comments...............................................................................................................11
1 Features..................................................................................................13
Product features....................................................................................................................................13
Partition Manager.................................................................................................................................13
Available IP addresses...........................................................................................................................13
Integrated applications to HP SMH..........................................................................................................13
2 System requirements..................................................................................17
Supported operating systems..................................................................................................................17
Supported browsers..............................................................................................................................18
Verifying system requirements.................................................................................................................19
Obtaining HP SMH software..................................................................................................................19
HP media.......................................................................................................................................19
HP websites....................................................................................................................................19
3 Known issues...........................................................................................21
HP SMH 3.0.0 release for HP-UX............................................................................................................21
HP SMH 2.2.9 release for HP-UX............................................................................................................22
HP SMH 2.2.8 release for HP-UX............................................................................................................22
HP SMH 2.2.7 release for HP-UX............................................................................................................22
HP SMH 2.2.6 release for HP-UX............................................................................................................22
HP SMH 2.2.5 release for HP-UX.............................................................................................................22
HP SMH 2.2.4 release for HP-UX............................................................................................................23
HP SMH 2.2.3 release for HP-UX.............................................................................................................23
HP SMH 2.2.2 release for HP-UX............................................................................................................23
HP SMH 2.2 release for HP-UX...............................................................................................................24
HP SMH 2.1.6 release for Windows and Linux..........................................................................................24
HP SMH 2.1.4 release for Windows and Linux..........................................................................................24
HP SMH 2.0 release for Linux.................................................................................................................25
HP SMH 2.0 release for Windows...........................................................................................................26
Index.........................................................................................................27
Table of Contents 3

4

List of Tables
1 Publishing history................................................................................................................................10
1-1 HP SMH integrated applications.......................................................................................................14
3-1 Firewall protection...........................................................................................................................26
5

6

About this document
Intended audience
HP System Management Homepage (HP SMH) is a web-based interface that consolidates and simplifies
single system management for HP servers running the HP-UX, Linux, and Microsoft Windows operating
systems. HP SMH aggregates and displays data from Web Agents and other HP Web-enabled System
Management Software that includes:
•HP Insight Diagnostics
•Array Configuration Utility
•HP Software Version Control Agents
This release notes is for system administrators and any level of user of HP SMH.
New and changed information in this edition
The following sections list what is new for the HP SMH releases.
March 2009 release for HP-UX
HP SMH 3.0.0 for HP-UX 11i v2 and HP-UX 11i v3 provides the following product enhancements:
•Improved feature-rich user interface
•User configurable user interface properties
•User control of session and user interface timeouts
•Capability to verify HP SMH software dependency information using the new smhassist command
HP SMH 2.2.9.2 for HP-UX 11i v1 contains defect fixes.
January 2009 release for Linux and Windows
HP SMH 3.0 provides the following functionality over previous HP SMH releases:
•New user interface
•Support for Kerberos on Windows
•Support for Command Line Interface
•The ability to disable port 2301
•User configurable user interface properties
•User control of session and user interface timeouts
•Log localization
•IPv6 support
Added operating system support to include:
•HP ProLiant servers
Windows Server 2008 Standard for x86 and x64•
•Windows Server 2008 Enterprise for x86 and x64
•Windows Server 2008 Datacenter for x86 and x64
•Windows Server 2008 Essential Business Server
•Windows Server HPC 2008
•Windows Server® 2003 Standard Edition SP2 for x86 and x64
•Windows Server 2003 R2, Standard Edition SP2 for x86 and x64
•Windows Server 2003, Web Edition SP2
Intended audience 7

•Windows Server 2003 Enterprise Edition SP2 x86 and x64
•Windows Server 2003 R2 Enterprise Edition SP2 x86 and x64
•Windows Server 2003 SBS, Standard and Premium R2
•Windows Vista Business Edition Ultimate Edition
•Windows Vista Enterprise Edition
•Windows Vista Ultimate Edition
•Windows XP SP2
•Red Hat Enterprise Linux 5 update 2 for x86 and AMD64/EMT64T
•Red Hat Enterprise Linux 4 update 6 or later for x86 and AMD64/EMT64T
•Red Hat Enterprise Linux 3 update 9 for x86, AMD64/EMT64T
•Red Hat Enterprise Linux 3 update 9 for x86 with Cisco Kernel
•Oracle Enterprise Linux
•SUSE Linux Enterprise Server (SLES) 11 for x86 and AMD64/EMT64T
•SUSE Linux Enterprise Server (SLES) 10 SP 1 or later for x86 and AMD64/EMT64T
•SUSE Linux Enterprise Server (SLES) 9 SP 4 or later for x86 and AMD64/EMT64T
•VMware ESX 3.0
•VMware ESX 3.0.1
•VMware ESX 3.0.2
•VMware ESX 3.5
•Novell Open Enterprise Server (OES)
•XEN
•HP Integrity servers
Windows Server 2008 for Itanium-based systems, 64-bit•
•Red Hat Linux Advanced Server 2.1 Update 3 and later
•SUSE Linux Enterprise Server (SLES) 8 with Service Pack 3 and later
Typographic conventions
find (1) HP-UX manpage. In this example, “find” is the manpage name and “1” is the
manpage section.
Book Title Title of a book or other document.
Linked Title Title that is a hyperlink to a book or other document.
http://www.hp.com A Web site address that is a hyperlink to the site.
Command Command name or qualified command phrase.
user input Commands and other text that you type.
computer output Text displayed by the computer.
Enter The name of a keyboard key. Note that Return and Enter both refer to the same
key. A sequence such as Ctrl+A indicates that you must hold down the key labeled
Ctrl while pressing the Akey.
term Defined use of an important word or phrase.
variable The name of an environment variable, for example PATH or errno.
value A value that you may replace in a command or function, or information in a display
that represents several possible values.
<element> An element used in a markup language.
attrib= An attribute used in a markup language.
8 About this document

Related information
HP SMH documentation
For more information about HP SMH, see the following sources:
• HP System Management Homepage Release Notes The release notes provide documentation for
what's new with the release, features and change notifications, system requirements, and known issues.
The release notes are available on the HP Technical Documentation website at http://docs.hp.com.
•HP System Management Homepage Help System The help system provides a complete set of
documentation for using, maintaining, and troubleshooting HP SMH. In HP SMH, go to the Help menu.
• HP System Management Homepage Installation Guide The installation guide provides information
about installing and getting started using HP SMH. It includes an introduction to basic concepts,
definitions, and functionality associated with HP SMH. The installation guide is available on the HP
Technical Documentation website at http://docs.hp.com. Also, for Linux and Windows operating system
releases, the installation guide is available on the Management CD and at the HP SMH web page at
http://h18013.www1.hp.com/products/servers/management/agents/documentation.html.
• HP System Management Homepage User Guide The user guide provides a complete set of
documentation for using, maintaining, and troubleshooting HP SMH. For Linux and Windows operating
systems, this user guide is available under the HP SMH Help menu, and on the HP Technical
Documentation website at http://docs.hp.com. For HP-UX, HP no longer provides a printed user guide.
See the HP SMH online help content for information using, maintaining, and troubleshooting HP SMH.
•Simplifying single-system management on HP-UX 11i – HP System Management Homepage (HP SMH)
This white paper introduces HP SMH and its various plug-ins. The use cases involving HP SMH
plug-ins highlight the features provided by HP SMH. The white paper is available on the HP Technical
Documentation website at http://www.docs.hp.com/en/5991-7499/SMH_whitepaper_11iv3.pdf.
• hpsmh (1m) manpage For HP-UX releases, the manpage is available from the command line using
the man hpsmh command. This information is not available for Linux and Windows operating systems.
• smhstartconfig (1M) manpage For HP-UX operating system releases, the manpage is available from
the CLI using the man smhstartconfig command. This information is not available for Linux and
Windows operating systems.
• sam (1M) manpage For HP-UX operating system releases, the manpage is available from the CLI
using the man sam command. This information is not available for Linux and Windows operating
systems.
• smh (1m) manpage This command is available in HP-UX 11i v3 (B.11.31) only. This is an enhanced
version of the sam (1m) command. For HP-UX operating system releases, the manpage is available
from the CLI using the man smh command. This information is not available for Linux and Windows
operating systems.
• smhassist (1m) manpage You can use the smhassist command to verify the configurations of SMH
and see if there are any dependent software, patches or configuration errors. For HP-UX 11i v3 (B.11.31)
and HP-UX 11i v2 (B.11.23) operating system releases, the manpage is available from the CLI using
the man smhassist command. This information is not available for HP-UX 11i v1 (B.11.11), Linux,
and Windows operating systems.
•HP System Management Homepage website The website provides HP SMH information and product
links. Go to the HP website at http://www.hp.com or to the Software Depot home at http://
www.hp.com/go/softwaredepot and search for System Management Homepage.
•HP Insight Essentials software page This web page is at http://www.hp.com/servers/manage.
Related information 9

HP-UX documentation
For more information about using HP SMH in an HP-UX environment, see the following sources. They are
available on the Instant Information DVD and on the HP Technical Documentation web site at http://
docs.hp.com.
•HP-UX 11i Installation and Update Guides (v1, B.11.11; v2, B.11.23; v3 B.11.31) Provide instructions
on how to install or update to HP-UX.
•HP-UX 11i Release Notes (v1, B.11.11; v2, B.11.23; v3 B.11.31) Describe new features and
functionality changes for HP-UX 11i, including information on HP SMH.
•For HP-UX operating system release documentation, check for the latest version on http://docs.hp.com.
Publishing history
This section provides the publishing history of the document.
Table 1 Publishing history
Publication DateEdition NumberSupported VersionsSupported Operating
Systems
Manufacturing Part
Number
March 20093Integrity updates to the
release notes.
Linux and Windows466603-003
March 20092HP-UX 11i v3 (B.11.31),
HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-402
January 20091See “System
requirements” (page 17).
Linux and Windows466303-001
September 200817HP-UX 11i v3 (B.11.31),
HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-401
March 200816HP-UX 11i v3 (B.11.31),
HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-009
December 200715HP-UX 11i v3 (B.11.31),
HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-008
February 200814See “System
requirements” (page 17).
Linux and Windows438861-007
September 200713HP-UX 11i v3 (B.11.31),
HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-006
August 200712HP SMH 2.1.10-00Linux and Windows438861-005
June 200711See “System
requirements” (page 17).
Linux and Windows438861-004
June 200710HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX438861-003
April 20079See “System
requirements” (page 17).
Linux and Windows438861-002
February 20078HP-UX 11i v3 (B.11.31)HP-UX381383-009
January 20077See “System
requirements” (page 17).
Linux and Windows438861-001
December 20066HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX381383-008
September 20065HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX381383-007
10 About this document

Publication DateEdition NumberSupported VersionsSupported Operating
Systems
Manufacturing Part
Number
June 20064For HP-UX: HP-UX 11i v2
(B.11.23). For Linux and
Windows: See “System
requirements” (page 17).
HP-UX, Linux, and
Windows
381383-006-en
February 20064See “System
requirements” (page 17).
Linux and Windows381383-005
December 20053HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX381383-004-en
September 20052HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX381383-002
May 20052HP-UX 11i v2 (B.11.23),
HP-UX 11i v1 (B.11.11)
HP-UX381383-002
November 20041See “System
requirements” (page 17).
Linux and Windows381383-001
HP encourages your comments
HP encourages your comments concerning this document. HP is committed to providing documentation that
meets your needs. Send any errors found, suggestions for improvement, or compliments to:
[email protected]. Include the document title, manufacturing part number, and any comment, error
found, or suggestion for improvement you have concerning this document.
HP encourages your comments 11

12

1 Features
The HP System Management Homepage (HP SMH) for HP-UX, Linux, and Windows provides the following
features. They apply to all releases, except where noted.
Product features
•Provides security for HP Insight Management Agents using the Secure Sockets Layer (SSL) for Linux and
Windows.
•Provides web-based applications and security using SSL.
•Enables you to configure the trust mode level.
•Manages the user system access through the user group account.
•Displays all HP Web-enabled System Management Software that provides information to HP SMH.
•Common HTTP and HTTPS service for HP Insight Management Agents and utilities, for reduced complexity
and system resource requirements
•Simplified architecture for implementing HTTP security and HP management updates
•Access control through Network Interface Card (NIC) binding and advanced configuration features for
individual and groups of users
•Broad operating system and browser support
Partition Manager
To start Partition Manager, a user with Administrator (root) privileges can run the parmgr command with
the -b option to bypass the authentication step under HP SMH. To use this feature on HP-UX 11i v1, you
must install KRNG11i, the Strong Random Number Generator software for HPUX 11i v1, available from the
Software Depot web site at http://www.hp.com/go/softwaredepot.
Available IP addresses
In HP-UX only, when autostart mode is enabled, any access made through port 2301 detects a change in
the list of available IP addresses. In previous releases, SMH would only be accessible using the IP addresses
defined at system startup. If new IP addresses were defined then SMH would have to be restarted to use
them.
With this new SMH feature, any configuration change in the list of available IP addresses, in clustered and
non-clustered environments, would automatically reconfigure SMH, restarting it when needed. Environment
changes such as enabling a new network card, adding ifconfig aliases, or a cluster package failover would
trigger this feature.
Alternatively, you can disable this feature by adding the following line to the
/opt/hpsmh/conf.common/smhpd.xml file: <monitor-ip-changes>0</monitor-ip-changes>
For more information, go to the Distributed Systems Administration Utilities V1.1 Release Notes for HP-UX
11i v2 March 2006 at http://docs.hp.com/en/T2786-90011/ch01s01.html.
Integrated applications to HP SMH
HP SMH is a framework for a number of integrated applications. HP SMH provides the following system
management functionality through a single user interface, the HP SMH Graphical User Interface (GUI).
Product features 13

Table 1-1 HP SMH integrated applications
Application DescriptionOperating SystemApplication Name
The Accounts for Users and Groups (ugweb)
tool is a web-based single-system
management tool for managing user
accounts and groups on a local system, a
Network Information Service (NIS) system,
and an LDAP (Lightweight Directory Access
Protocol) server. For more information, see
the product's online help.
HP-UXAccounts for Users and Groups (ugweb)
The HP-UX Auditing and Security Attributes
Configuration tool is a tool for configuring
and managing security attributes, and for
configuring and managing the auditing
subsystem without having to convert the
system to Trusted mode. For more
information, see the product's online help.
HP-UXAuditing and Security Attributes HP-UX
Configuration (secweb)
Using Pluggable Authentication Modules
(PAM), configure account authentication,
password authentication, session
authentication, and user authentication.
HP-UXAuthenticated Commands (PAM)
The Disks and File Systems (fsweb) tool
supports system administration tasks,
including management of logical groups and
volume groups, disk management tasks, and
file system tasks. The fsweb tool supports
these file systems: Cache File System (CFS),
Compact Disc File System (CDFS), Common
Internet File System (CIFS), Hierarchical File
System (HFS), Network File System (NFS),
and Veritas File System (VxFS). For more
information, see the product's online help.
HP-UXDisks and File Systems (fsweb)
Distributed Systems Administration Utilities
provide several tools for simplifying the
management of groups of systems and
Serviceguard clusters. Configure
configuration synchronization, consolidated
logging, and view system logs.
HP-UXDistributed System Authentication Utilities
(DSAU)
The EMSWeb tool (bundle EventMonitorGUI)
enables the user to manage requests to
monitor resources on the system. Using the
EMSWeb tool the user can create and
manage requests to monitor resources.
HP-UXEvent Monitoring Service (web-based)
(EMSweb)
Error Management Technology provides a
quick, easy method of accessing
error/cause/action information on all system
errors. Use it to query or customize error
data.
HP-UXError Management Technology (EMT)
EVWEB is a user component of System Fault
Management (SFM). Using evweb, you can
view and administer various Web-Based
Enterprise Management (WBEM) events that
are generated on an HP-UX system. For more
information, see the product's online help.
HP-UXEVWEB
View hardware events.HP-UXIPMI Event Viewer
The kcweb tool allows the user to configure
an HP-UX kernel and to monitor consumption
of kernel resources controlled by parameters.
For more information, see the product's
online help.
HP-UXKernel Configuration (kcweb)
Network Interfaces Configuration is a
web-based system management tool that
enables you to configure network interfaces
on HP-UX installed systems. For more
information, see the product's online help.
HP-UXNetwork Interfaces Configuration
14 Features

Application DescriptionOperating SystemApplication Name
The ncweb tools allows the user to configure
network services. For more information, see
the product's online help.
HP-UXNetwork Services Configuration (ncweb)
Partition Manager (parmgr) is a web-based
application that allows system administrators
to use a convenient graphical user interface
(GUI) to configure and manage nPartitions
on HP server systems. Partition Manager can
also detect several types of configuration
problems. For more information, see the
product's online help.
HP-UX, Linux, WindowsPartition Manager (parmgr)
The pdweb tool lists and manages the
OLRAD-capable PCI slots reported by the
olrad command and Peripheral Devices
reported by the ioscan command. On
selecting a slot/device from the list, it
displays details about the selected
device/slot. It allows a user to Add /
Replace / Delete an OLRAD-capable card
online, to view the devices reported by
ioscan command, and to re-install the
Device Special Files where possible. For
more information, see the product's online
help.
HP-UXPeripheral Devices Configuration (pdweb)
Configure printers or plotters, manage print
requests, and save or restore print spooler
configuration.
HP-UXPrinter Management
Using the Event Monitoring Service,
configure and view resource monitoring
requests on the managed node.
HP-UXResource Management
Configure the display monitor, and configure
the X server.
HP-UXResource Monitors
Allows you to distribute administrative
responsibilities by creating roles with
appropriate authorizations and assigning
them to non-root users and groups.
HP-UXRole-based Access Control (RBAC)
The secweb tool enables you to configure
system-wide and per user values of security
attributes of local and Network Information
Service (NIS) users. For more information,
see the product's online help.
HP-UXSecurity Attributes Configuration (secweb)
Serviceguard allows you to create high
availability clusters of HP 9000 and HP
Integrity servers. In the event of a component
failure, Serviceguard coordinates the failover
process by transferring it to other highly
available component(s) thereby preventing
a network, hardware, or software issue from
significantly disrupting service. Serviceguard
Manager is the graphical user interface for
Serviceguard. You can then do the following:
Monitor, Administer, Configure Serviceguard
clusters. For more information, see the
product's online help.
HP-UX, Linux, WindowsServiceguard Cluster - Serviceguard
Manager
Copy depot software, install software, list
depot software, list Installed software,
remove depot software, and remove installed
software.
HP-UXSoftware Management
Set the system clock, list the NTP client
networks, and display NTP network time
sources.
HP-UXTime
Integrated applications to HP SMH 15

16

2 System requirements
The minimum system requirements for HP-UX, Linux, and Windows systems to run HP System Management
Homepage (HP SMH):
Supported operating systems
HP ProLiant servers
•Windows Server 2008 Standard for x86 and x64
•Windows Server 2008 Enterprise for x86 and x64
•Windows Server 2008 Datacenter for x86 and x64
•Windows Server 2008 Essential Business Server
•Windows Server HPC 2008
•Windows Server® 2003 Standard Edition SP2 for x86 and x64
•Windows Server 2003 R2, Standard Edition SP2 for x86 and x64
•Windows Server 2003, Web Edition SP2
•Windows Server 2003 Enterprise Edition SP2 x86 and x64
•Windows Server 2003 R2 Enterprise Edition SP2 x86 and x64
•Windows Server 2003 SBS, Standard and Premium R2
•Windows Vista Business Edition Ultimate Edition
•Windows Vista Enterprise Edition
•Windows Vista Ultimate Edition
•Windows XP SP2
•Red Hat Enterprise Linux 5 update 2 for x86 and AMD64/EMT64T
•Red Hat Enterprise Linux 4 update 6 or later for x86 and AMD64/EMT64T
•Red Hat Enterprise Linux 3 update 9 for x86, AMD64/EMT64T
•Red Hat Enterprise Linux 3 update 9 for x86 with Cisco Kernel
•Oracle Enterprise Linux
•SUSE Linux Enterprise Server (SLES) 11 for x86 and AMD64/EMT64T
•SUSE Linux Enterprise Server (SLES) 10 SP 1 or later for x86 and AMD64/EMT64T
•SUSE Linux Enterprise Server (SLES) 9 SP 4 or later for x86 and AMD64/EMT64T
•VMware ESX 3.0
•VMware ESX 3.0.1
•VMware ESX 3.0.2
•VMware ESX 3.5
•Novell Open Enterprise Server (OES)
•XEN
HP Integrity servers
•Windows Server 2008 R2 for Itanium-based systems, 64-bit
•Windows Server 2008 for Itanium-based systems, 64-bit
•Red Hat Linux Advanced Server 2.1 Update 3 and later
•SUSE Linux Enterprise Server (SLES) 8 with Service Pack 3 and later
•Red Hat Enterprise Linux 5.0 Update 1
Supported operating systems 17

•Red Hat Enterprise Linux 4.0 Update 6
•SUSE Linux Enterprise Server (SLES) 10 Service Pack 1
•SUSE Linux Enterprise Server (SLES) 9 Service Pack 4
HP-UX
•HP-UX 11i v3 (B.11.31) for HP Integrity Servers and HP 9000 Servers
•HP-UX 11i v2 (B.11.23) for HP Integrity Servers and HP 9000 Servers
•HP-UX 11i v1 (B.11.11) for HP Servers and Workstations
NOTE: For Linux operating systems, Lightweight Directory Access Protocol (LDAP) is supported on SUSE
Linux Enterprise Server 9 and SUSE Linux Enterprise Server 10.
For Windows operating systems, SmartStart CD requires that all systems have a minimum of 256 MB of
RAM.
HP-UX 11i v1 (B.11.11) Operating Environments are for PA-RISC systems only. HP-UX 11i v2 (B.11.23)
Operating Environments (September 2004 and later). HP-UX 11i v3 (B.11.31) Operating Environments
(February 2007 and later) support both PA-RISC and Itanium-based operating systems.
Supported browsers
For HP-UX Itanium-based or PA-RISC operating systems:
•Mozilla 1.6, 1.7
•Firefox 1.0.2, 1.5, 2.0
•Internet Explorer 6.0 SP2
•Internet Explorer 7.0 (SMH 2.2.9 or later)
For Windows Itanium-based or x86 operating systems:
•Internet Explorer 6.0 SP2
•Internet Explorer 7.0 (SMH 2.1.9 or later)
•Mozilla 1.7.13
•Firefox 2.0.0.x
•Firefox 3.0
•Mozilla Firefox 1.5.0.x
For Linux Intel Itanium or x86 operating systems:
•Mozilla 1.7.13
•Firefox 2.0.0.x
•Firefox 3.0
•Mozilla Firefox 1.5.0.x
NOTE: Installation of HP SMH does not require a browser.
The HP Web-enabled System Management Software is hardware-dependent. For the installation to complete
successfully, your system must support at least 256 colors.
18 System requirements

Verifying system requirements
Before installation begins, the installation utility verifies whether:
•For HP-UX, Linux, and Windows, the operating system meets the minimum requirements. If HP SMH
does not support the operating system on a system, an error message appears, indicating that an invalid
operating system was found.
•For HP-UX, Linux, and Windows, the signed in user has administrator/root rights. If the user does not
have these rights, an error message appears, indicating that administrator/root rights were not detected.
•For Linux, if a dependency is not met on an Itanium-based operating system, the installation does not
complete.
Obtaining HP SMH software
HP media
•HP-UX 11i v3 (B.11.31) Operating Environment DVD, February 2007 or later
•HP-UX 11i v3 (B.11.31) Applications DVD, February 2007 or later
•HP-UX 11i v2 (B.11.23) Operating Environment DVD, May 2005 or later
•HP-UX 11i v2 (B.11.23) Applications DVD, September 2005 or later
•HP-UX 11i v1 (B.11.11) Operating Environment DVD, September 2005 or later
•HP-UX 11i v1 (B.11.11) Applications DVD, May 2005 or later
•HP SmartSetup CD 6.20 or later
•HP SmartStart CD 8.20 or later
•HP ProLiant Support Pack 8.20 or later
•HP Integrity Support Pack 6.20 or later
HP websites
These HP websites are accessible from any system with a web browser and access to the Internet:
•To download the latest software versions, see the HP website at http://www.hp.com.
•For HP-UX operating systems, you can also find the software on the Software Depot home at http://
www.hp.com/go/softwaredepot.
•For Linux and Windows operating systems, HP SMH is available in the ProLiant Support Pack and
Integrity Support Pack. To download the latest version of the ProLiant Support Pack or Integrity Support
Pack, see the Support and Troubleshooting link at http://www.hp.com.
Verifying system requirements 19

20